Duckstation/dep/msvc/sdl2/include/SDL_rwops.h

413 lines
13 KiB
C
Raw Normal View History

2019-09-09 07:01:26 +00:00
/*
Simple DirectMedia Layer
2021-09-08 00:49:10 +00:00
Copyright (C) 1997-2021 Sam Lantinga <slouken@libsdl.org>
2019-09-09 07:01:26 +00:00
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
*/
/**
* \file SDL_rwops.h
*
* This file provides a general interface for SDL to read and write
* data streams. It can easily be extended to files, memory, etc.
*/
2020-02-03 03:53:31 +00:00
#ifndef SDL_rwops_h_
#define SDL_rwops_h_
2019-09-09 07:01:26 +00:00
#include "SDL_stdinc.h"
#include "SDL_error.h"
#include "begin_code.h"
/* Set up for C function definitions, even when using C++ */
#ifdef __cplusplus
extern "C" {
#endif
/* RWops Types */
2020-02-03 03:53:31 +00:00
#define SDL_RWOPS_UNKNOWN 0U /**< Unknown stream type */
#define SDL_RWOPS_WINFILE 1U /**< Win32 file */
#define SDL_RWOPS_STDFILE 2U /**< Stdio file */
#define SDL_RWOPS_JNIFILE 3U /**< Android asset */
#define SDL_RWOPS_MEMORY 4U /**< Memory stream */
#define SDL_RWOPS_MEMORY_RO 5U /**< Read-Only memory stream */
2021-09-08 00:49:10 +00:00
#if defined(__VITA__)
#define SDL_RWOPS_VITAFILE 6U /**< Vita file */
#endif
2019-09-09 07:01:26 +00:00
/**
* This is the read/write operation structure -- very basic.
*/
typedef struct SDL_RWops
{
/**
* Return the size of the file in this rwops, or -1 if unknown
*/
Sint64 (SDLCALL * size) (struct SDL_RWops * context);
/**
* Seek to \c offset relative to \c whence, one of stdio's whence values:
* RW_SEEK_SET, RW_SEEK_CUR, RW_SEEK_END
*
* \return the final offset in the data stream, or -1 on error.
*/
Sint64 (SDLCALL * seek) (struct SDL_RWops * context, Sint64 offset,
int whence);
/**
* Read up to \c maxnum objects each of size \c size from the data
* stream to the area pointed at by \c ptr.
*
* \return the number of objects read, or 0 at error or end of file.
*/
size_t (SDLCALL * read) (struct SDL_RWops * context, void *ptr,
size_t size, size_t maxnum);
/**
* Write exactly \c num objects each of size \c size from the area
* pointed at by \c ptr to data stream.
*
* \return the number of objects written, or 0 at error or end of file.
*/
size_t (SDLCALL * write) (struct SDL_RWops * context, const void *ptr,
size_t size, size_t num);
/**
* Close and free an allocated SDL_RWops structure.
*
* \return 0 if successful or -1 on write error when flushing data.
*/
int (SDLCALL * close) (struct SDL_RWops * context);
Uint32 type;
union
{
#if defined(__ANDROID__)
struct
{
2021-09-08 00:49:10 +00:00
void *asset;
2019-09-09 07:01:26 +00:00
} androidio;
#elif defined(__WIN32__)
struct
{
SDL_bool append;
void *h;
struct
{
void *data;
size_t size;
size_t left;
} buffer;
} windowsio;
2021-09-08 00:49:10 +00:00
#elif defined(__VITA__)
struct
{
int h;
struct
{
void *data;
size_t size;
size_t left;
} buffer;
} vitaio;
2019-09-09 07:01:26 +00:00
#endif
#ifdef HAVE_STDIO_H
struct
{
SDL_bool autoclose;
FILE *fp;
} stdio;
#endif
struct
{
Uint8 *base;
Uint8 *here;
Uint8 *stop;
} mem;
struct
{
void *data1;
void *data2;
} unknown;
} hidden;
} SDL_RWops;
/**
* \name RWFrom functions
*
* Functions to create SDL_RWops structures from various data streams.
*/
/* @{ */
extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromFile(const char *file,
const char *mode);
#ifdef HAVE_STDIO_H
extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromFP(FILE * fp,
SDL_bool autoclose);
#else
extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromFP(void * fp,
SDL_bool autoclose);
#endif
extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromMem(void *mem, int size);
extern DECLSPEC SDL_RWops *SDLCALL SDL_RWFromConstMem(const void *mem,
int size);
/* @} *//* RWFrom functions */
extern DECLSPEC SDL_RWops *SDLCALL SDL_AllocRW(void);
extern DECLSPEC void SDLCALL SDL_FreeRW(SDL_RWops * area);
#define RW_SEEK_SET 0 /**< Seek from the beginning of data */
#define RW_SEEK_CUR 1 /**< Seek relative to current read point */
#define RW_SEEK_END 2 /**< Seek relative to the end of data */
/**
2021-09-08 00:49:10 +00:00
* Use this macro to get the size of the data stream in an SDL_RWops.
*
* \param context the SDL_RWops to get the size of the data stream from
* \returns the size of the data stream in the SDL_RWops on success, -1 if
* unknown or a negative error code on failure; call SDL_GetError()
* for more information.
*
* \since This function is available since SDL 2.0.0.
2020-02-03 03:53:31 +00:00
*/
extern DECLSPEC Sint64 SDLCALL SDL_RWsize(SDL_RWops *context);
/**
2021-09-08 00:49:10 +00:00
* Seek within an SDL_RWops data stream.
*
* This function seeks to byte `offset`, relative to `whence`.
*
* `whence` may be any of the following values:
*
* - `RW_SEEK_SET`: seek from the beginning of data
* - `RW_SEEK_CUR`: seek relative to current read point
* - `RW_SEEK_END`: seek relative to the end of data
*
* If this stream can not seek, it will return -1.
*
* SDL_RWseek() is actually a wrapper function that calls the SDL_RWops's
* `seek` method appropriately, to simplify application development.
*
* \param context a pointer to an SDL_RWops structure
* \param offset an offset in bytes, relative to **whence** location; can be
* negative
* \param whence any of `RW_SEEK_SET`, `RW_SEEK_CUR`, `RW_SEEK_END`
* \returns the final offset in the data stream after the seek or -1 on error.
2019-09-09 07:01:26 +00:00
*
2021-09-08 00:49:10 +00:00
* \sa SDL_RWclose
* \sa SDL_RWFromConstMem
* \sa SDL_RWFromFile
* \sa SDL_RWFromFP
* \sa SDL_RWFromMem
* \sa SDL_RWread
* \sa SDL_RWtell
* \sa SDL_RWwrite
2019-09-09 07:01:26 +00:00
*/
2020-02-03 03:53:31 +00:00
extern DECLSPEC Sint64 SDLCALL SDL_RWseek(SDL_RWops *context,
Sint64 offset, int whence);
/**
2021-09-08 00:49:10 +00:00
* Determine the current read/write offset in an SDL_RWops data stream.
*
* SDL_RWtell is actually a wrapper function that calls the SDL_RWops's `seek`
* method, with an offset of 0 bytes from `RW_SEEK_CUR`, to simplify
* application development.
*
* \param context a SDL_RWops data stream object from which to get the current
* offset
* \returns the current offset in the stream, or -1 if the information can not
* be determined.
*
* \sa SDL_RWclose
* \sa SDL_RWFromConstMem
* \sa SDL_RWFromFile
* \sa SDL_RWFromFP
* \sa SDL_RWFromMem
* \sa SDL_RWread
* \sa SDL_RWseek
* \sa SDL_RWwrite
2020-02-03 03:53:31 +00:00
*/
extern DECLSPEC Sint64 SDLCALL SDL_RWtell(SDL_RWops *context);
/**
2021-09-08 00:49:10 +00:00
* Read from a data source.
*
* This function reads up to `maxnum` objects each of size `size` from the
* data source to the area pointed at by `ptr`. This function may read less
* objects than requested. It will return zero when there has been an error or
* the data stream is completely read.
*
* SDL_RWread() is actually a function wrapper that calls the SDL_RWops's
* `read` method appropriately, to simplify application development.
2020-02-03 03:53:31 +00:00
*
2021-09-08 00:49:10 +00:00
* \param context a pointer to an SDL_RWops structure
* \param ptr a pointer to a buffer to read data into
* \param size the size of each object to read, in bytes
* \param maxnum the maximum number of objects to be read
* \returns the number of objects read, or 0 at error or end of file; call
* SDL_GetError() for more information.
*
* \sa SDL_RWclose
* \sa SDL_RWFromConstMem
* \sa SDL_RWFromFile
* \sa SDL_RWFromFP
* \sa SDL_RWFromMem
* \sa SDL_RWseek
* \sa SDL_RWwrite
2020-02-03 03:53:31 +00:00
*/
extern DECLSPEC size_t SDLCALL SDL_RWread(SDL_RWops *context,
2021-09-08 00:49:10 +00:00
void *ptr, size_t size,
size_t maxnum);
2020-02-03 03:53:31 +00:00
/**
2021-09-08 00:49:10 +00:00
* Write to an SDL_RWops data stream.
*
* This function writes exactly `num` objects each of size `size` from the
* area pointed at by `ptr` to the stream. If this fails for any reason, it'll
* return less than `num` to demonstrate how far the write progressed. On
* success, it returns `num`.
*
* SDL_RWwrite is actually a function wrapper that calls the SDL_RWops's
* `write` method appropriately, to simplify application development.
*
* \param context a pointer to an SDL_RWops structure
* \param ptr a pointer to a buffer containing data to write
* \param size the size of an object to write, in bytes
* \param num the number of objects to write
* \returns the number of objects written, which will be less than **num** on
* error; call SDL_GetError() for more information.
2020-02-03 03:53:31 +00:00
*
2021-09-08 00:49:10 +00:00
* \sa SDL_RWclose
* \sa SDL_RWFromConstMem
* \sa SDL_RWFromFile
* \sa SDL_RWFromFP
* \sa SDL_RWFromMem
* \sa SDL_RWread
* \sa SDL_RWseek
2020-02-03 03:53:31 +00:00
*/
extern DECLSPEC size_t SDLCALL SDL_RWwrite(SDL_RWops *context,
2021-09-08 00:49:10 +00:00
const void *ptr, size_t size,
size_t num);
2020-02-03 03:53:31 +00:00
/**
2021-09-08 00:49:10 +00:00
* Close and free an allocated SDL_RWops structure.
2020-02-03 03:53:31 +00:00
*
2021-09-08 00:49:10 +00:00
* SDL_RWclose() closes and cleans up the SDL_RWops stream. It releases any
* resources used by the stream and frees the SDL_RWops itself with
* SDL_FreeRW(). This returns 0 on success, or -1 if the stream failed to
* flush to its output (e.g. to disk).
*
* Note that if this fails to flush the stream to disk, this function reports
* an error, but the SDL_RWops is still invalid once this function returns.
*
* SDL_RWclose() is actually a macro that calls the SDL_RWops's `close` method
* appropriately, to simplify application development.
*
* \param context SDL_RWops structure to close
* \returns 0 on success or a negative error code on failure; call
* SDL_GetError() for more information.
*
* \sa SDL_RWFromConstMem
* \sa SDL_RWFromFile
* \sa SDL_RWFromFP
* \sa SDL_RWFromMem
* \sa SDL_RWread
* \sa SDL_RWseek
* \sa SDL_RWwrite
2020-02-03 03:53:31 +00:00
*/
extern DECLSPEC int SDLCALL SDL_RWclose(SDL_RWops *context);
2019-09-09 07:01:26 +00:00
2020-02-03 03:53:31 +00:00
/**
2021-09-08 00:49:10 +00:00
* Load all the data from an SDL data stream.
2020-02-03 03:53:31 +00:00
*
2021-09-08 00:49:10 +00:00
* The data is allocated with a zero byte at the end (null terminated) for
* convenience. This extra byte is not included in the value reported via
* `datasize`.
2020-02-03 03:53:31 +00:00
*
2021-09-08 00:49:10 +00:00
* The data should be freed with SDL_free().
2020-02-03 03:53:31 +00:00
*
2021-09-08 00:49:10 +00:00
* \param src the SDL_RWops to read all available data from
* \param datasize if not NULL, will store the number of bytes read
* \param freesrc if non-zero, calls SDL_RWclose() on `src` before returning
* \returns the data, or NULL if there was an error.
2020-02-03 03:53:31 +00:00
*/
2021-09-08 00:49:10 +00:00
extern DECLSPEC void *SDLCALL SDL_LoadFile_RW(SDL_RWops *src,
size_t *datasize,
int freesrc);
2020-02-03 03:53:31 +00:00
/**
2021-09-08 00:49:10 +00:00
* Load all the data from a file path.
2020-02-03 03:53:31 +00:00
*
2021-09-08 00:49:10 +00:00
* The data is allocated with a zero byte at the end (null terminated) for
* convenience. This extra byte is not included in the value reported via
* `datasize`.
2020-02-03 03:53:31 +00:00
*
2021-09-08 00:49:10 +00:00
* The data should be freed with SDL_free().
2020-02-03 03:53:31 +00:00
*
2021-09-08 00:49:10 +00:00
* \param file the path to read all available data from
* \param datasize if not NULL, will store the number of bytes read
* \returns the data, or NULL if there was an error.
2020-02-03 03:53:31 +00:00
*/
extern DECLSPEC void *SDLCALL SDL_LoadFile(const char *file, size_t *datasize);
2019-09-09 07:01:26 +00:00
/**
* \name Read endian functions
*
* Read an item of the specified endianness and return in native format.
*/
/* @{ */
extern DECLSPEC Uint8 SDLCALL SDL_ReadU8(SDL_RWops * src);
extern DECLSPEC Uint16 SDLCALL SDL_ReadLE16(SDL_RWops * src);
extern DECLSPEC Uint16 SDLCALL SDL_ReadBE16(SDL_RWops * src);
extern DECLSPEC Uint32 SDLCALL SDL_ReadLE32(SDL_RWops * src);
extern DECLSPEC Uint32 SDLCALL SDL_ReadBE32(SDL_RWops * src);
extern DECLSPEC Uint64 SDLCALL SDL_ReadLE64(SDL_RWops * src);
extern DECLSPEC Uint64 SDLCALL SDL_ReadBE64(SDL_RWops * src);
/* @} *//* Read endian functions */
/**
* \name Write endian functions
*
* Write an item of native format to the specified endianness.
*/
/* @{ */
extern DECLSPEC size_t SDLCALL SDL_WriteU8(SDL_RWops * dst, Uint8 value);
extern DECLSPEC size_t SDLCALL SDL_WriteLE16(SDL_RWops * dst, Uint16 value);
extern DECLSPEC size_t SDLCALL SDL_WriteBE16(SDL_RWops * dst, Uint16 value);
extern DECLSPEC size_t SDLCALL SDL_WriteLE32(SDL_RWops * dst, Uint32 value);
extern DECLSPEC size_t SDLCALL SDL_WriteBE32(SDL_RWops * dst, Uint32 value);
extern DECLSPEC size_t SDLCALL SDL_WriteLE64(SDL_RWops * dst, Uint64 value);
extern DECLSPEC size_t SDLCALL SDL_WriteBE64(SDL_RWops * dst, Uint64 value);
/* @} *//* Write endian functions */
/* Ends C function definitions when using C++ */
#ifdef __cplusplus
}
#endif
#include "close_code.h"
2020-02-03 03:53:31 +00:00
#endif /* SDL_rwops_h_ */
2019-09-09 07:01:26 +00:00
/* vi: set ts=4 sw=4 expandtab: */