More updates to README.txt. Almost done.

Docs/README.txt

@@ -1,7 +1,5 @@
-TODO supported games, compatibility matrix
+TODO: input stuff to be written in section 12
-TODO: convert all tabs to spaces
+TODO: final proof read, then convert all tabs to spaces
-TODO: describe auto trigger in config index
-TODO: Andy Geezer's region codes
  
  
   ####                                                      ###           ###
@@ -53,18 +51,31 @@ still low.
   Table of Contents
 =====================
 
-    -- Introduction
+    --- Introduction
-    -- Disclaimer
+    --- Disclaimer
-    -- Table of Conents
+    --- Table of Conents
      1. Revision History
      2. Installing Supermodel
-    3. Basic Usage
+     3. Running Supermodel
-    4. 
+     4. Game Compatibility
+     5. Video Settings
+     6. Audio Settings
+     7. Controls
+     8. Force Feedback
+     9. Save States and NVRAM
+    10. Game-Specific Comments and Tips
+    11. Merging Split ROM Sets
+    12. The Configuration File
+    13. Index of Command Line Options
+    14. Index of Configuration File Settings
+    15. Compiling the Source Code
+    16. Contact Information
+    17. Acknowledgments
     
 
-====================
+=======================
-  Revision History
+  1. Revision History
-====================
+=======================
 
     Version 0.2a (September ?, 2011)
         - New, fully customizable input system.  Supports any combination of 
@@ -118,9 +129,9 @@ still low.
         - Initial public alpha release.
         
         
-=========================
+============================
-  Installing Supermodel
+  2. Installing Supermodel
-=========================
+============================
 
 To install Supermodel on Windows, extract the ZIP archive containing the
 Supermodel executable to a folder of your choice.  The following files and
@@ -145,35 +156,9 @@ As of this version, Linux and Mac OS X binaries are not provided.  Users must
 compile their own.
 
 
-=============================
+=========================
-  Compiling the Source Code
+  3. Running Supermodel
-=============================
+=========================
-
-First, ensure that OpenGL, SDL (http://www.libsdl.org), and zlib
-(http://zlib.net) are installed. GLEW (http://glew.sourceforge.net) is now
-included in the source tree and should not need to be installed separately.
-
-Next, extract the Supermodel source code and copy the appropriate Makefile 
-from the Makefiles/ directory to the base directory (that is, the one above
-Src/ and Makefiles/).  Makefiles for 32-bit Windows (Microsoft Visual C++ 
-2008), Linux/UNIX (GCC), and Mac OS X (GCC) are provided, all requiring GNU
-Make.  For Windows developers, MinGW (http://www.mingw.org) provides GNU Make.
-Alternatively, you can write a Makefile compatible with Microsoft Nmake and 
-submit it to me for inclusion in the next release. ;)  Consult the Visual 
-Studio documentation to learn how to configure the Microsoft compiler for 
-command line operation.
-
-Edit SDL_LIBPATH and SDL_INCLUDEPATH to reflect the location of the SDL
-development library and header files.  This should only be necessary for 
-Windows.  The UNIX and Mac OS X Makefiles should be able to automatically
-locate SDL if it was installed properly.
-
-Finally, run 'make'.  If all goes well it should produce a Supermodel binary.
-
-
-======================
-  Running Supermodel
-======================
 
 For now, Supermodel does not include a proper user interface.  It is operated
 entirely from the command line.  Run 'supermodel' without any command line 
@@ -195,44 +180,13 @@ Note that there is no user interface and all messages are printed to the
 command prompt.  In full screen mode, they will not be visible. 
 
 
-==========================
+=========================
-  Merging Split ROM Sets
+  4. Game Compatibility
-==========================
+=========================
-
-ROMs that are split into parent and child sets (eg., 'Scud Race Plus', whose
-parent ROM set is 'Scud Race') must be combined into a single ZIP file.  ROM
-files from the parent set that have the same IC numbers (usually the file 
-extension but sometimes the number in the file name itself) as child ROMs
-should be deleted, otherwise Supermodel may choose to load the parent game. 
-
-For example, 'Scud Race Plus' is normally distributed containing only the
-following files:
-
-    epr-20092a.17
-    epr-20093a.18
-    epr-20094a.19
-    epr-20095a.20
-    epr-20096a.21
-    mpr-20097.13
-    mpr-20098.14
-    mpr-20099.15
-    mpr-20100.16
-    mpr-20101.24
-    
-To merge with the parent ROM set, copy over all files from 'Scud Race' except
-those with extension numbers 17-21, 13-16, and 24.  Some 'Scud Race Plus' ROM
-sets may have 'mpr-20101.23' instead of 'mpr-20101.24'.  They are the same file
-and in both cases should replace the file with extension 24 from 'Scud Race'
-('mpr-19671.24').
-
-
-======================
-  Game Compatibility
-======================
 
 Supermodel recognizes all known Model 3 ROM sets but not all of them are 
 playable.  Below is a compatibility matrix.  The most obvious problem with each
-ROM set is stated.
+ROM set is reported.
 
    ROM Set                    Title                  Playable?   Comments
 +-----------+-----------------------------------------+-----+-----------------+
@@ -347,9 +301,9 @@ playable when in fact many are partially playable.  Controls may not be fully
 functional, however, and none have been tested thoroughly.
 
 
-==================
+=====================
-  Video Settings
+  5. Video Settings
-==================
+=====================
 
 Supermodel may be run in either windowed (default) or full screen mode.  It 
 automatically adjusts the display area to retain the aspect ratio of the Model
@@ -371,9 +325,9 @@ Video settings may also be specified globally or on a per-game basis in the
 configuration file, described elsewhere in this document.
 
 
-==================
+=====================
-  Audio Settings
+  6. Audio Settings
-==================
+=====================
 
 All Model 3 games have a sound board that is used for sound effects and, in
 some games, background music.  A few games use additional Digital Sound Boards
@@ -416,9 +370,9 @@ of ElSemi's code and also quite buggy.  Sound glitches are known to occur now
 and then, and many sounds and tunes do not sound quite correct.
 
 
-============
+===============
-  Controls
+  7. Controls
-============
+===============
 
 Supermodel only supports the keyboard and mouse at present.  Emulator functions
 are listed below and cannot be changed.
@@ -569,15 +523,16 @@ A common mistake is to configure inputs using one system and then launch
 Supermodel with another.
 
 
-==================
+=====================
-  Force Feedback
+  8. Force Feedback
-==================
+=====================
 
 Force feedback is presently supported in 'Scud Race' (including 'Scud Race 
 Plus'), 'Daytona USA 2' (both editions), and 'Sega Rally 2' on Windows only. To
 enable it, use the '-force-feedback' option.
 
-Drive board ROMs are required.
+Drive board ROMs are required.  They first appear in the MAME 0.143u6 ROM
+catalog and at the time of this writing, have not yet widely proliferated.
 
     Game            Drive Board ROM File    Size        Checksum (CRC32)
     ----            --------------------    ----        ----------------
@@ -597,7 +552,7 @@ do not support force feedback through DirectInput.
 
 
 Tuning Force Feedback
-=====================
+---------------------
 
 Force feedback can be enabled and tuned in the configuration file.  Setting
 'ForceFeedback' to 1 enables it:
@@ -632,9 +587,9 @@ determined by XInputConstForceMax).  The default values are shown above and
 will require calibration by the user on a game-by-game basis.
 
 
-=========================
+============================
-  Save States and NVRAM  
+  9. Save States and NVRAM  
-=========================
+============================
 
 Save states are saved and restored by pressing F5 and F7, respectively.  Up to
 10 different save slots can be selected with F6.  All files are written to the
@@ -648,9 +603,9 @@ automatically saved each time Supermodel exits and is loaded at start-up.  It
 can be cleared by deleting the NVRAM files or using Alt-N.
 
 
-===================================
+=======================================
-  Game-Specific Comments and Tips
+  10. Game-Specific Comments and Tips
-===================================
+=======================================
     
 
 Daytona USA 2 and Daytona USA 2 Power Edition
@@ -664,6 +619,10 @@ In 'Daytona USA 2', the region menu can be accessed by entering the Test Menu,
 holding down the Start button, and pressing: VR4, VR4, VR2, VR3, VR1, VR3, VR2.
 Changing the region to USA changes game text to English.
 
+By default, the 'Power Edition' ROM set features remixed music lyrics by
+Takenobu Mitsuyoshi.  These can be changed back to the Dennis St. James version
+in the Test Menu, under 'Game Assignments'.
+
 
 Le Mans 24
 ----------
@@ -726,9 +685,40 @@ and, in the 'Game Assignments' menu, performing the following sequence:
     3. Press the Service button again one time for about 5 seconds.
 
 
-==========================
+==============================
-  The Configuration File
+  11. Merging Split ROM Sets
-==========================
+==============================
+
+ROMs that are split into parent and child sets (eg., 'Scud Race Plus', whose
+parent ROM set is 'Scud Race') must be combined into a single ZIP file.  ROM
+files from the parent set that have the same IC numbers (usually the file 
+extension but sometimes the number in the file name itself) as child ROMs
+should be deleted, otherwise Supermodel may choose to load the parent game. 
+
+For example, 'Scud Race Plus' is normally distributed containing only the
+following files:
+
+    epr-20092a.17
+    epr-20093a.18
+    epr-20094a.19
+    epr-20095a.20
+    epr-20096a.21
+    mpr-20097.13
+    mpr-20098.14
+    mpr-20099.15
+    mpr-20100.16
+    mpr-20101.24
+    
+To merge with the parent ROM set, copy over all files from 'Scud Race' except
+those with extension numbers 17-21, 13-16, and 24.  Some 'Scud Race Plus' ROM
+sets may have 'mpr-20101.23' instead of 'mpr-20101.24'.  They are the same file
+and in both cases should replace the file with extension 24 from 'Scud Race'
+('mpr-19671.24').
+
+
+==============================
+  12. The Configuration File
+==============================
 
 Supermodel reads configuration settings from 'Supermodel.ini' located in the
 'Config' subdirectory.  If Supermodel was installed properly, a default file
@@ -789,8 +779,8 @@ Comments begin with a semicolon and extend until the end of the line.
     ; This is a comment.
 
 
-The Purpose of Sections
+Global and Game-Specific Sections
------------------------
+---------------------------------
 
 Sections determine whether settings are applied globally, to all games, or to
 specific games.  Game-specific settings will override global settings and can
@@ -846,9 +836,9 @@ The complete list of input settings can be found in the settings index below or
 by generating a configuration file using '-config-inputs'.  
 
 
-=================================
+=====================================
-  Index of Command Line Options
+  13. Index of Command Line Options
-=================================
+=====================================
 
 All valid command line settings are listed here, ordered by category.  Defaults
 are given under the assumption that they also have not been changed in the 
@@ -990,7 +980,7 @@ not.  All options are case sensitive.
     
     Description:    Enables force feedback.  Force feedback is only supported
                     in a few games (see the section on force feedback for more
-                    details).
+                    details).  Available only on Windows.
     
     ----------------
     
@@ -1014,9 +1004,9 @@ not.  All options are case sensitive.
     Description:    Prints the current input configuration.
 
 
-========================================
+============================================
-  Index of Configuration File Settings
+  14. Index of Configuration File Settings
-========================================
+============================================
 
 All valid configuration file settings are listed here, ordered by category.
 Please read the section describing the configuration file for more information.
@@ -1150,7 +1140,8 @@ All settings are case sensitive.
     
     Description:    If set to 1, enables force feedback emulation; if set to 0,
                     disables it (the default behavior).  Equivalent to the 
-                    '-force-feedback' command line option.
+                    '-force-feedback' command line option.  Available only on 
+                    Windows.
     
     ----------------
     
@@ -1164,7 +1155,7 @@ All settings are case sensitive.
     Description:    Sets strength of the four DirectInput force feedback
                     effects in percent.  Default is 100, indicating full 
                     strength.  Values exceeding 100% will distort the effects
-                    and may damage your controller.
+                    and may damage your controller.  Available only on Windows.
     
     ----------------
     
@@ -1177,7 +1168,7 @@ All settings are case sensitive.
                     Default is 100, indicating full strength.  Values exceeding
                     100% will distort the effects and may damage your 
                     controller.  The constant force effect is simulated using 
-                    vibration.
+                    vibration.  Available only on Windows.
     
     ----------------
     
@@ -1188,7 +1179,8 @@ All settings are case sensitive.
     Description:    Minimum strength above which a Model 3 constant force
                     command will be simulated on an XInput device.  
                     XInputConstForceMax determines the vibration strength for
-                    this effect.  The default value is 30.
+                    this effect.  The default value is 30.  Available only on
+                    Windows.
                     
     ----------------
         
@@ -1499,24 +1491,64 @@ All settings are case sensitive.
                     only be set in the 'Global' section.
     
 
-=======================
+=================================
-  Contact Information
+  15. Compiling the Source Code
-=======================
+=================================
+
+First, ensure that OpenGL, SDL (http://www.libsdl.org), and zlib
+(http://zlib.net) are installed. GLEW (http://glew.sourceforge.net) is
+included in the source tree and does not need to be installed separately.
+
+Next, extract the Supermodel source code and copy the appropriate Makefile 
+from the Makefiles/ directory to the base directory (that is, the one above
+Src/ and Makefiles/).  Makefiles for 32-bit Windows (Microsoft Visual C++ 
+2008), Linux/UNIX (GCC), and Mac OS X (GCC) are provided, all requiring GNU
+Make.  For Windows developers, MinGW (http://www.mingw.org) provides GNU Make.
+Alternatively, you can write a Makefile compatible with Microsoft Nmake and 
+submit it for inclusion in the next release. ;)  Consult the Visual Studio 
+documentation to learn how to configure the Microsoft compiler for command line
+operation.
+
+Edit SDL_LIBPATH and SDL_INCLUDEPATH to reflect the location of the SDL
+development library and header files.  This should only be necessary for 
+Windows.  The UNIX and Mac OS X Makefiles should be able to automatically
+locate SDL if it was installed properly.
+
+On Windows, Supermodel is compiled with the multi-threaded, static version of
+the run-time library (/MT option).  However, the SDL and zlib development 
+libraries, and the SDL run-time DLL, are distributed for use with the dynamic
+run-time (/MD option).  They must all be recompiled using /MT to work with 
+Supermodel.  Alternatively, Supermodel's Makefile can be edited to use the /MD
+option.
+
+When everything is ready, rename the appropriate Makefile to 'Makefile' and run
+'make'.  If all goes well it should produce a Supermodel binary.
+
+
+===========================
+  16. Contact Information
+===========================
 
 The official Supermodel web site is:
 
     http://www.Supermodel3.com
     
-Questions? Comments? Contributions? Your feedback is welcome! We only ask that
+Questions?  Comments?  Contributions?  Your feedback is welcome!  A discussion
-you refrain from making feature requests or asking about ROMs. The primary
+forum is available at the web site and the primary author, Bart Trzynadlowski,
-author, Bart Trzynadlowski, can be reached at:
+can be reached by email at:
 
 	supermodel.emu@gmail.com
 	
+We ask that you remain mindful of the following courtesies:
 
-===================
+	- Do NOT ask about ROMs.
-  Acknowledgments
+	- Do NOT request features.
-===================
+	- Do NOT ask about release dates of future versions.
+
+
+=======================
+  17. Acknowledgments
+=======================
 
 Numerous people contributed their precious time and energy to this project.
 Without them, Supermodel would not have been possible.  In no particular order,
@@ -1526,14 +1558,17 @@ we would like to thank:
     - Stefano Teso, original Supermodel team member
     - ElSemi, for all sorts of technical information and insight
     - Naibo Zhang, for his work on Model 3 graphics
-    - R. Belmont, for all sorts of help
+    - R. Belmont, for all sorts of help and the Mac OS X port
     - Andrew Lewis (a.k.a. Andy Geezer), for dumping the drive board ROMs and
       providing region codes
     - The Guru, for his efforts in dumping Model 3 ROM sets
     - Abelardo Vidal Martos, for providing extremely useful video recordings of
       actual Model 3 games
     - Andrew Gardner, for fruitful discussion
-    - Chad Reker, for being an especially thorough play-tester
+    - Chad Reker, Alex Corrigan, pcvideogamer, and Groni, for being especially
+      thorough play-testers
+    - Charles MacDonald, for his helpful description of the System 24 tile 
+      generator
     - And of course, my sister Nicole, for help with web site images
 
 Supermodel includes code from the following projects: