diff --git a/Config/Games.xml b/Config/Games.xml
index 062bc20..543995f 100644
--- a/Config/Games.xml
+++ b/Config/Games.xml
@@ -1,7 +1,7 @@
 <!--
   Supermodel
   A Sega Model 3 Arcade Emulator.
-  Copyright 2011-2017 Bart Trzynadlowski, Nik Henson, Ian Curtis
+  Copyright 2003-2022 The Supermodel Team
 
   Games.xml
 
diff --git a/Docs/LICENSE.txt b/Docs/LICENSE.txt
index 5cba08b..c2d4747 100644
--- a/Docs/LICENSE.txt
+++ b/Docs/LICENSE.txt
@@ -1,5 +1,5 @@
- 
- 
+
+
   ####                                                      ###           ###
  ##  ##                                                      ##            ##
  ###     ##  ##  ## ###   ####   ## ###  ##  ##   ####       ##   ####     ##
@@ -7,15 +7,15 @@
     ###  ##  ##   ##  ## ######   ##  ## ####### ##  ##  ##  ##  ######    ##
  ##  ##  ##  ##   #####  ##       ##     ## # ## ##  ##  ##  ##  ##        ##
   ####    ### ##  ##      ####   ####    ##   ##  ####    ### ##  ####    ####
-                 ####                                                            
+                 ####
 
                        A Sega Model 3 Arcade Emulator.
-                Copyright 2011 Bart Trzynadlowski, Nik Henson
+                   Copyright 2003-2022 The Supermodel Team
 
 
-                LICENSE AGREEMENT FOR SUPERMODEL VERSION 0.2A
+                      LICENSE AGREEMENT FOR SUPERMODEL
+
 
-                      
 Supermodel is distributed as free software under the terms of the GNU General
 Public License, included below.  See README.txt for additional documentation.
 The source code may be obtained from the official Supermodel web site:
diff --git a/Docs/README.txt b/Docs/README.txt
index 9c83841..176a87a 100644
--- a/Docs/README.txt
+++ b/Docs/README.txt
@@ -1,5 +1,5 @@
- 
- 
+
+
   ####                                                      ###           ###
  ##  ##                                                      ##            ##
  ###     ##  ##  ## ###   ####   ## ###  ##  ##   ####       ##   ####     ##
@@ -7,10 +7,10 @@
     ###  ##  ##   ##  ## ######   ##  ## ####### ##  ##  ##  ##  ######    ##
  ##  ##  ##  ##   #####  ##       ##     ## # ## ##  ##  ##  ##  ##        ##
   ####    ### ##  ##      ####   ####    ##   ##  ####    ### ##  ####    ####
-                 ####                                                            
+                 ####
 
                        A Sega Model 3 Arcade Emulator.
-                Copyright 2011 Bart Trzynadlowski, Nik Henson
+                   Copyright 2003-2022 The Supermodel Team
 
 
                    USER MANUAL FOR SUPERMODEL VERSION 0.2A
@@ -22,8 +22,8 @@
 
 Supermodel emulates the Sega Model 3 arcade platform.  It uses OpenGL 2.1 and
 SDL, and can run on Windows, Linux, and Mac OS X.  In order to use it, you must
-legally possess ROM images of Model 3 games.  Learning to operate Supermodel 
-will come with a steep learning curve for most people.  Before seeking out 
+legally possess ROM images of Model 3 games.  Learning to operate Supermodel
+will come with a steep learning curve for most people.  Before seeking out
 help, please read this user manual carefully.
 
 Supermodel is distributed as free software under the terms of the GNU General
@@ -40,7 +40,7 @@ The source code may be obtained from the official Supermodel web site:
 ==============
 
 This is an early public release of Supermodel.  It is very much preliminary,
-alpha version software (hence the 'a' in the version number).  Development 
+alpha version software (hence the 'a' in the version number).  Development
 began in January of 2011 and has focused on reverse engineering aspects of the
 Model 3 that are still unknown.  Consequently, many important features, such as
 a proper user interface, are not yet implemented and game compatibility is
@@ -70,28 +70,28 @@ still low.
     14. Compiling the Source Code
     15. Contact Information
     16. Acknowledgments
-    
+
 
 =======================
   1. Revision History
 =======================
 
     Version 0.2a (September 24, 2011)
-        - New, fully customizable input system.  Supports any combination of 
+        - New, fully customizable input system.  Supports any combination of
           keyboards, mice, and analog and digital controllers.  [Nik Henson]
         - Texture offsets.  Fixes models in 'Fighting Vipers 2', 'Virtual On',
           cars in the 'Scud Race' and 'Daytona USA 2' selection screens, etc.
         - Fixed a 2D palette bug that would cause black pixels to occasionally
           turn transparent.
         - Added all remaining ROM sets.  [krom]
-        - Got some new games to boot: 'Spikeout', 'Ski Champ', 'Sega Bass 
+        - Got some new games to boot: 'Spikeout', 'Ski Champ', 'Sega Bass
           Fishing', 'Dirt Devils', etc.
         - Sound support.  Special thanks to ElSemi for contributing his SCSP
           emulator and Karl Stenerud for allowing us to use his 68K emulator.
         - Multi-threading support.  Sound and drive board emulation are off-
-          loaded to separate threads, substantially enhancing performance. 
+          loaded to separate threads, substantially enhancing performance.
           [Nik Henson]
-        - Z80 emulation based on code by Frank D. Cringle and YAZE-AG by 
+        - Z80 emulation based on code by Frank D. Cringle and YAZE-AG by
           Andreas Gerlich.
         - Digital Sound Board (MPEG music) emulation courtesy of R. Belmont and
           the MPEG decoder library by Tomislav Uzelac.
@@ -104,7 +104,7 @@ still low.
         - Drive board and force feedback emulation for 'Scud Race', 'Daytona
           USA 2', and 'Sega Rally 2'.  [Nik Henson]
         - Viewable display area properly clipped.  Ghost artifacts no longer
-          appear in border regions when the resolution exceeds the display 
+          appear in border regions when the resolution exceeds the display
           area.
         - Changed gear shifting: added a dedicated neutral gear and sequential
           shifting.
@@ -123,11 +123,11 @@ still low.
         - Small changes to ppc_ops.cpp for C++0x compliance.  [R. Belmont]
         - Included glew.h into the source tree.  [R. Belmont]
         - Changed WIN32 definition to SUPERMODEL_WIN32.
-        
+
     Version 0.1a (April 1, 2011)
         - Initial public alpha release.
-        
-        
+
+
 ============================
   2. Installing Supermodel
 ============================
@@ -143,11 +143,11 @@ directories should be created:
     README.txt              This text file.
     LICENSE.txt             Supermodel license and terms of use.
     Config/                 Directory where the configuration file is stored.
-    Config/Supermodel.ini   Configuration file containing default input 
+    Config/Supermodel.ini   Configuration file containing default input
                             settings.
     NVRAM/                  Directory where NVRAM contents will be saved.
     Saves/                  Directory where save states will be saved.
-    
+
 Supermodel requires OpenGL 2.1 and a substantial amount of both video and
 system memory.  A very fast CPU and GPU are needed to achieve playable frame
 rates.
@@ -161,7 +161,7 @@ compile their own.
 =========================
 
 For now, Supermodel does not include a proper user interface.  It is operated
-entirely from the command line.  Run 'supermodel' without any command line 
+entirely from the command line.  Run 'supermodel' without any command line
 arguments for an explanation of supported options.
 
 Supermodel uses MAME-compatible ROM sets.  It loads from ZIP archives based on
@@ -176,15 +176,15 @@ This will load 'scud.zip' (Scud Race) and run it in full screen mode.
 Initially, inputs are assigned according to the settings in 'Supermodel.ini',
 located in the 'Config' subdirectory.
 
-Note that there is no user interface and all messages are printed to the 
-command prompt.  In full screen mode, they will not be visible. 
+Note that there is no user interface and all messages are printed to the
+command prompt.  In full screen mode, they will not be visible.
 
 
 =========================
   4. Game Compatibility
 =========================
 
-Supermodel recognizes all known Model 3 ROM sets but not all of them are 
+Supermodel recognizes all known Model 3 ROM sets but not all of them are
 playable.  Below is a compatibility matrix.  The most obvious problem with each
 ROM set is reported.
 
@@ -297,7 +297,7 @@ ROM set is reported.
 +-----------+-----------------------------------------+-----+-----------------+
 
 Most ROM sets suffering from severe graphical problems are categorized as non-
-playable when in fact many are partially playable.  Controls may not be fully 
+playable when in fact many are partially playable.  Controls may not be fully
 functional, however, and none have been tested thoroughly.
 
 
@@ -305,13 +305,13 @@ functional, however, and none have been tested thoroughly.
   5. Video Settings
 =====================
 
-Supermodel may be run in either windowed (default) or full screen mode.  It 
+Supermodel may be run in either windowed (default) or full screen mode.  It
 automatically adjusts the display area to retain the aspect ratio of the Model
 3's native (and Supermodel's default) resolution, 496x384.  Currently, this
 cannot be overriden.  Changing video modes at run-time is not yet supported.
 
 By default, Supermodel limits the frame rate to 60 frames per second.  This has
-no impact on performance except when the frame rate exceeds 60 FPS on fast 
+no impact on performance except when the frame rate exceeds 60 FPS on fast
 systems.  Frame rate limiting can be disabled with the '-no-throttle' option.
 Some video drivers may continue to lock to the refresh rate.
 
@@ -335,16 +335,16 @@ some games, background music.  A few games use additional Digital Sound Boards
 produced by the DSB and 'sound' refers to both the sound effects and background
 music produced by the regular sound board.
 
-Model 3 sound and MPEG music are generated separately and then mixed by an 
+Model 3 sound and MPEG music are generated separately and then mixed by an
 amplifier.  The relative signal levels are not known, so Supermodel simply
 outputs all audio at full volume.  This causes the MPEG music to be too quiet
 in some games ('Scud Race', 'Daytona USA 2') and too loud in others ('Star Wars
-Trilogy').  The '-sound-volume' and '-music-volume' options can be used to 
+Trilogy').  The '-sound-volume' and '-music-volume' options can be used to
 change the volume.  As arguments, they take a volume level in percent ranging
 from 0 (muted) to 200% (maximum, doubled amplitude).  For example:
 
     supermodel game.zip -sound-volume=50 -music-volume=170
-    
+
 This command line cuts the sound volume in half and increases the music volume
 by 70%.
 
@@ -366,8 +366,8 @@ configuration file, described elsewhere in this document.
 
 Please keep in mind that MPEG music emulation is preliminary and the decoder is
 buggy.  Periodic squeaks and pops occur on many music tracks.  The Sega Custom
-Sound Processor (SCSP) emulator, used for sound emulation, is also still quite 
-buggy.  Sound glitches are known to occur now and then, and many sounds and 
+Sound Processor (SCSP) emulator, used for sound emulation, is also still quite
+buggy.  Sound glitches are known to occur now and then, and many sounds and
 tunes do not sound quite correct yet.
 
 
@@ -400,13 +400,13 @@ Learning and Configuring Game Controls
 --------------------------------------
 
 Settings for game controls are stored in 'Supermodel.ini'.  To learn the
-current configuration, use the '-print-inputs' command line option.  
+current configuration, use the '-print-inputs' command line option.
 
     supermodel -print-inputs
 
 If you delete 'Supermodel.ini', all inputs will become unmapped and will have
 to be reconfigured!
-    
+
 To reconfigure the inputs, use the '-config-inputs' option.  A blank window
 will open up and instructions will be printed to the command prompt.  Read them
 carefully!  Pressing the Escape key exits without saving changes.  Pressing 'q'
@@ -414,9 +414,9 @@ will save changes to 'Supermodel.ini'.  You can choose which input to configure
 using the Up and Down arrow keys.  Clearing an input means it will be unusable.
 
 If the configuration dialog is not responding to your key presses or mouse and
-joystick movements, make sure that the blank pop-up window rather than the 
-command prompt is selected.  This may seem counter-intuitive but inputs are 
-captured by the graphical window while messages are printed to the command 
+joystick movements, make sure that the blank pop-up window rather than the
+command prompt is selected.  This may seem counter-intuitive but inputs are
+captured by the graphical window while messages are printed to the command
 prompt.
 
 
@@ -430,7 +430,7 @@ Supermodel.
 In order to calibrate a control, press 'b' when configuring the inputs and
 follow the on-screen instructions carefully.
 
-NOTE: After calibration, you must remap the control again or it will not 
+NOTE: After calibration, you must remap the control again or it will not
 function properly!
 
 Several input-related settings are stored in the configuration file.  Refer to
@@ -459,7 +459,7 @@ until it reaches its maximum/minimum values.  The rate of change can only be
 set manually in the configuration file.  These options are described elsewhere
 in this document.
 
-Most analog inputs, such as the steering wheel, require two settings to be 
+Most analog inputs, such as the steering wheel, require two settings to be
 controlled digitally.  For example, the steering wheel can be turned left and
 right by setting 'Steer Left' and 'Steer Right', or it can be mapped to a
 single analog control ('Full Steering').
@@ -509,12 +509,12 @@ off-screen.  To reload, hold down this button and then, while holding it, press
 the trigger.  For easier reloading, the 'InputAutoTrigger' setting can be
 enabled in the configuration file (described elsewhere in this manual).
 
-Crosshairs will be visible in full screen mode and can also be enabled in 
+Crosshairs will be visible in full screen mode and can also be enabled in
 windowed modes.  Use Alt-I to cycle through different crosshair options (enable
 for a single player, both, or none).
 
-For multiple mouse support, allowing two mice or PC light guns to be mapped, 
-Raw Input must be used.  This is supported only on Windows and is described 
+For multiple mouse support, allowing two mice or PC light guns to be mapped,
+Raw Input must be used.  This is supported only on Windows and is described
 below.
 
 
@@ -542,7 +542,7 @@ Windows users can select between four different input systems:
 
 When switching input systems with '-input-system', you must also configure your
 inputs using the same option.  For example, when running Supermodel with XInput
-('supermodel game.zip -input-system=xinput'), you must also configure with 
+('supermodel game.zip -input-system=xinput'), you must also configure with
 XInput ('supermodel -config-inputs -input-system=xinput').  Many settings are
 not compatible between input systems.
 
@@ -555,31 +555,31 @@ Troubleshooting
 
 Common input-related problems are discussed below.
 
-    
-    Problem:    
+
+    Problem:
         No response while configuring inputs.
-    
-    Solution:   
+
+    Solution:
         Make sure the main window is top window, especially with the SDL input
         system.
 
     ---------
-    
+
     Problem:
         An attached controller is not recognized at all.
-    
-    Solution:   
+
+    Solution:
         - On the input configuration screen, press 'I' to see information about
           the input system and check that the required controller is in the
           list.
         - If it is not in the list, check that it is plugged in and visible in
           the operating system.  If a controller is plugged in while Supermodel
-          is running, Supermodel will need to be restarted in order for it to 
+          is running, Supermodel will need to be restarted in order for it to
           recognize the new controller.
-        - On Windows, if after checking the above points the controller is 
-          still not in the list, try running Supermodel with the SDL input 
+        - On Windows, if after checking the above points the controller is
+          still not in the list, try running Supermodel with the SDL input
           system by specifying '-input-system=sdl' on the command line.
-          
+
     ---------
 
     Problem:
@@ -587,36 +587,36 @@ Common input-related problems are discussed below.
 
     Solution:
         This may mean that the joystick axis needs calibrating.  This can be
-        done by pressing 'b' on the configuration screen and following the 
+        done by pressing 'b' on the configuration screen and following the
         instructions.
 
     ---------
-    
+
     Problem:
         Steering wheel pedals are not being recognized.
-   
+
     Solution:
-        For some steering wheels where the pedals have been configured in a 
-        'split axis' mode (ie. not sharing a combined axis), the values that 
+        For some steering wheels where the pedals have been configured in a
+        'split axis' mode (ie. not sharing a combined axis), the values that
         the pedals send are inverted.  This means that without configuration,
         Supermodel will be unable to recognize them.  To fix this, they should
         be calibrated on the calibration screen in the same way as above.
-        
+
     ---------
-    
+
     Problem:
         A control isn't working despite having been calibrated.
-   
+
     Solution:
         After calibration, while still in the configuration dialog, you must
         remap the control again for the new settings to take effect.
 
     ---------
-    
+
     Problem:
         XBox 360 controller trigger buttons cannot be triggered simultaneously
         or no rumble effects.
-    
+
     Solution:
         On Windows, make sure that you specify '-input-system=xinput'.
 
@@ -625,7 +625,7 @@ Common input-related problems are discussed below.
   8. Force Feedback
 =====================
 
-Force feedback is presently supported in 'Scud Race' (including 'Scud Race 
+Force feedback is presently supported in 'Scud Race' (including 'Scud Race
 Plus'), 'Daytona USA 2' (both editions), and 'Sega Rally 2' on Windows only. To
 enable it, use the '-force-feedback' option.
 
@@ -640,7 +640,7 @@ catalog and at the time of this writing, have not yet widely proliferated.
 
 The sizes and checksums must match those listed above.  The file names may be
 different but will almost certainly contain the same identifying numbers.
-Ensure that the appropriate drive board ROM files are present in the 
+Ensure that the appropriate drive board ROM files are present in the
 corresponding games' ZIP archives, otherwise Supermodel will silently proceed
 without force feedback.
 
@@ -656,7 +656,7 @@ Force feedback can be enabled and tuned in the configuration file.  Setting
 'ForceFeedback' to 1 enables it:
 
     ForceFeedback = 1
-    
+
 There are four DirectInput effects: constant force, self centering, friction,
 and vibration.  The strength of each can be tuned with the following settings:
 
@@ -664,7 +664,7 @@ and vibration.  The strength of each can be tuned with the following settings:
     DirectInputSelfCenterMax = 100
     DirectInputFrictionMax = 100
     DirectInputVibrateMax = 100
-    
+
 They are given as percentages and represent the maximum strength for each
 effect.  A setting of 0 disables them entirely.  Values above 100% are
 accepted but may clip or distort the effect.  By default, they are set to 100%,
@@ -681,13 +681,13 @@ The relevant settings are:
 
 The constant force threshold specifies how strong a constant force command must
 be before it is sent to the controller as a vibration effect (whose strength is
-determined by XInputConstForceMax).  The default values are shown above and 
+determined by XInputConstForceMax).  The default values are shown above and
 will require calibration by the user on a game-by-game basis to achieve the
 best feel.
 
 
 ============================
-  9. Save States and NVRAM  
+  9. Save States and NVRAM
 ============================
 
 Save states are saved and restored by pressing F5 and F7, respectively.  Up to
@@ -700,12 +700,12 @@ a save state is taken, it will not resume normal operation when the state is
 loaded, even if Supermodel is running with the co-processor re-enabled.  The
 drive board (and consequently, force feedback effects) is explicitly disabled
 for the remainder of the session if a save state with an inactive drive board
-is loaded.  Audio co-processors are not, and therefore audio playback may 
+is loaded.  Audio co-processors are not, and therefore audio playback may
 eventually resume after the audio boards have booted themselves up.
 
 Non-volatile memory (NVRAM) consists of battery-backed backup RAM and an EEPROM
 chip.  The former is used for high score data and statistics whereas the latter
-stores machine settings (often accessed using the Test buttons).  NVRAM is 
+stores machine settings (often accessed using the Test buttons).  NVRAM is
 automatically saved each time Supermodel exits and is loaded at start-up.  It
 can be cleared by deleting the NVRAM files or pressing Alt-N.
 
@@ -713,7 +713,7 @@ can be cleared by deleting the NVRAM files or pressing Alt-N.
 =======================================
   10. Game-Specific Comments and Tips
 =======================================
-    
+
 
 Daytona USA 2 and Daytona USA 2 Power Edition
 ---------------------------------------------
@@ -754,7 +754,7 @@ Clear the NVRAM (Alt-N) and reset the game (Alt-R).
 Sega Rally 2
 ------------
 
-As with 'Star Wars Trilogy', you may experience problems if you attempt to 
+As with 'Star Wars Trilogy', you may experience problems if you attempt to
 start a game before any 3D graphics are displayed (for example, during the Sega
 logo).
 
@@ -788,7 +788,7 @@ button.
 Virtua Fighter 3
 ----------------
 
-The game is playable but there are numerous graphical glitches, particularly 
+The game is playable but there are numerous graphical glitches, particularly
 during transition scenes.
 
 
@@ -820,13 +820,13 @@ following order:
        from 'Supermodel.ini', overriding settings from step 1.
     3. Command line options are applied, overriding settings from the previous
        steps.
-       
+
 In other words, command line options have the highest precedence, followed by
 game-specific settings, and lastly, global settings.
 
 An index of all allowed settings is provided further below in this document.
 
-NOTE: Type carefully!  Supermodel will not report syntax errors nor detect 
+NOTE: Type carefully!  Supermodel will not report syntax errors nor detect
 typos.  Carefully read the discussion of the file syntax below.  To verify that
 your intended settings are taking effect, check the 'error.log' file that is
 produced by Supermodel during each run.
@@ -839,7 +839,7 @@ The configuration file is a list of settings grouped by sections.  All setting
 names and their arguments are case sensitive.  They take the form:
 
     Name = Argument
-    
+
 Only one setting per line is allowed.  Only two types of arguments are allowed:
 integers and strings.  The choice of which to use is determined by the setting.
 Integers can be negative.  Strings can contain any characters and are enclosed
@@ -853,13 +853,13 @@ by double quotes.  Examples:
     StringSetting3 = "1+1, abc, these are all valid characters!"
 
 Many settings are simply boolean variables expecting an integer value of either
-0 (disabled) or 1 (enabled).  Some settings require values and others take 
+0 (disabled) or 1 (enabled).  Some settings require values and others take
 strings for file names or input mappings.
 
 Section names appear in between square brackets on their own lines.
 
     [ SectionName ]
-    
+
 Settings that appear at the beginning of the file without a preceeding section
 are automatically assigned to 'Global'.
 
@@ -885,7 +885,7 @@ In the example below, custom configurations are created for 'Scud Race' and
 'The Lost World'.  All other games will use the global settings.
 
     [ Global ]
-    
+
     ; Run full screen at 1024x768
     XResolution = 1024
     YResolution = 768
@@ -893,18 +893,18 @@ In the example below, custom configurations are created for 'Scud Race' and
 
     ; Scud Race
     [ scud ]
-    
+
     ; Run at 1080p
     XResolution = 1920
     YResolution = 1080
-    
+
     ; Music is too quiet by default
     SoundVolume = 50
     MusicVolume = 200
-    
+
     ; The Lost World
     [ lostwsga ]
-    
+
     PowerPCFrequency = 25   ; run PowerPC at 25 MHz
 
 In this example, only 'Scud Race' will run at 1920x1080.  All other games will
@@ -926,19 +926,19 @@ A mapping may be specified in one of the following three ways:
     MOUSE_XXX   For a mouse axis (X or Y), wheel, or button (1-5) (eg.
                 MOUSE_XAXIS, MOUSE_WHEEL_UP, MOUSE_BUTTON3).
 
-    JOY1_XXX    For a joystick axis (X, Y, Z, RX, RY, RZ), POV controller 
+    JOY1_XXX    For a joystick axis (X, Y, Z, RX, RY, RZ), POV controller
     JOY2_XXX    (1-4), or button (1-12) (e.g. JOY1_XAXIS, JOY3_POV2_UP,
     ...         JOY2_BUTTON4).
- 
+
 Joysticks, including game pads and steering wheels, are numbered from 1 on up.
 Their ordering is system dependent and if controllers are swapped between
-invocations of Supermodel, then the ordering may change.  If the number is 
+invocations of Supermodel, then the ordering may change.  If the number is
 omitted then the mapping applies to all joysticks, eg. JOY_BUTTON1 means button
 1 on any attached joystick.
 
-In addition to the above, when using the Raw Input system on Windows (command 
+In addition to the above, when using the Raw Input system on Windows (command
 line option '-input-system=rawinput') it is possible to refer to a particular
-mouse or keyboard by including its number in the mapping, eg. KEY2_A or 
+mouse or keyboard by including its number in the mapping, eg. KEY2_A or
 MOUSE3_XAXIS.  This allows the independent mapping of dual mice or dual light
 guns (which present themselves as mice to Supermodel) for 'The Lost World'.
 
@@ -948,15 +948,15 @@ trigger the input and the comma means that just one needs to be active.  The
 exclamation mark means that a mapping must not be active.
 
 Of the above the comma is the most useful.  It allows the mapping of several
-different control methods to a single input.  For example, both a keyboard and 
+different control methods to a single input.  For example, both a keyboard and
 a joystick could be mapped to the same input.  When combining mappings in this
-way, the ordering is important as mappings earlier in the list will take 
+way, the ordering is important as mappings earlier in the list will take
 precedence over later ones (see example 3 below).
 
 When an axis is mapped to a digital input, its direction must be qualified with
 a _POS or _NEG after the axis name.  For example, JOY1_XAXIS_NEG indicates that
-joystick 1 must be pushed left (negative direction) in order to activate the 
-input.  Additionally, the following shortcuts are provided for some common 
+joystick 1 must be pushed left (negative direction) in order to activate the
+input.  Additionally, the following shortcuts are provided for some common
 joystick axis directions:
 
     JOY1_LEFT  is the same as JOY1_XAXIS_NEG
@@ -970,21 +970,21 @@ of joystick 1 in Star Wars Trilogy so that it acts like a plane's yoke.
 
 Examples:
 
-    1. InputLeft = "KEY_LEFT,JOY1_LEFT"  
+    1. InputLeft = "KEY_LEFT,JOY1_LEFT"
 
-        Digital input InputLeft will be triggered whenever the left arrow key 
+        Digital input InputLeft will be triggered whenever the left arrow key
         is pressed or joystick 1 is pushed left.
 
     2. InputStart1 = "KEY_ALT+KEY_S"
 
-        Both Alt and S must be pressed at the same time in order to trigger the 
+        Both Alt and S must be pressed at the same time in order to trigger the
         digital input InputStart1 (player 1 Start button).
 
     3. InputSteering = "JOY1_XAXIS,MOUSE_XAXIS"
 
         Analog steering can be controlled with either the joystick or by moving
         the mouse.  Due to the ordering used, the joystick will take preference
-        and so the mouse can only control the steering when the joystick is 
+        and so the mouse can only control the steering when the joystick is
         released.
 
 The complete list of input mappings can be found in the settings index below or
@@ -994,28 +994,28 @@ by generating a configuration file using '-config-inputs'.
 Controller Settings
 -------------------
 
-Several settings are available to fine tune the way Supermodel handles 
+Several settings are available to fine tune the way Supermodel handles
 controllers.
 
 
 Keyboard Settings:
 
-The rate at which analog controls' values increase or decrease when controlled 
-by a key can be set with the InputyKeySensitivity option.  It takes a value in 
-the range 1-100, with 100 being the most sensitive (fastest response) and 1 
+The rate at which analog controls' values increase or decrease when controlled
+by a key can be set with the InputyKeySensitivity option.  It takes a value in
+the range 1-100, with 100 being the most sensitive (fastest response) and 1
 being the least sensitive (slowest response).  The default value is 25.
 
 The speed with which analog controls return to their rest or 'off' values after
-a key has been released is configured with InputKeyDecaySpeed.  This takes a 
+a key has been released is configured with InputKeyDecaySpeed.  This takes a
 value in the range 1-200 and is expressed as a percentage of the attack speed.
-The default setting is 50, which means that analog controls take twice as long 
-to return to their off values as they do to reach their maximum and minimum 
+The default setting is 50, which means that analog controls take twice as long
+to return to their off values as they do to reach their maximum and minimum
 values.
 
 
 Mouse Settings:
 
-For a mouse it is possible to specify a rectangular area in the center of 
+For a mouse it is possible to specify a rectangular area in the center of
 Supermodel's display within which the mouse is considered to be inactive.  The
 width and height of this zone is set with the options 'InputMouseXDeadZone' and
 'InputMouseYDeadZone'.  They are expressed as a percentage 0-99 of the width
@@ -1030,56 +1030,56 @@ be substituted in for '**' like so: InputJoy1XDeadZone.  If the joystick number
 is omitted, then the option becomes the default for all joysticks, eg.
 InputJoyYSaturation.
 
-InputJoy**Deadzone: The dead zone of a joystick axis is the size of the zone 
+InputJoy**Deadzone: The dead zone of a joystick axis is the size of the zone
 around its central or 'off' position within which the axis is considered to be
-inactive.  It is important to specify this since joysticks rarely return to 
+inactive.  It is important to specify this since joysticks rarely return to
 their perfect center when released.  The dead zone is expressed as a percentage
 0-99 of the total range of the axis and the default value is 2%.
 
 InputJoy**Saturation: The saturation of a joystick axis is the point at which
 the axis is considered to be at its most extreme position.  It can be thought
-of as a measure of the sensivity of the axis.  Like the dead zone, it is 
-expressed as a percentage of the axis range but its value may be larger than 
-100, up to a maximum of 200.  A value of 50 means that the joystick only needs 
-to be moved halfway in order for Supermodel to see it as fully extended.  
-Conversely a value of 200 means that when the joystick is at its extreme 
+of as a measure of the sensivity of the axis.  Like the dead zone, it is
+expressed as a percentage of the axis range but its value may be larger than
+100, up to a maximum of 200.  A value of 50 means that the joystick only needs
+to be moved halfway in order for Supermodel to see it as fully extended.
+Conversely a value of 200 means that when the joystick is at its extreme
 position Supermodel will see it as only halfway.  The default sensitivity is
 100%, which corresponds to a 1-to-1 mapping.  For playing driving games with a
-game pad, it is sometimes a good idea to use a value larger than 100% so that 
+game pad, it is sometimes a good idea to use a value larger than 100% so that
 the steering feels less sensitive on a thumbstick.
 
-InputJoy**MinVal, InputJoy**OffVal, InputJoy**MaxVal: Normally a joystick axis 
-will send values to Supermodel that fall within the range -32768 to +32767, 
-with 0 representing the central or 'off' position.  However, in some cases an 
-axis may behave differently.  This has been observed with certain steering 
-wheels that have their pedals configured in a 'split axis' mode.  The pedals 
+InputJoy**MinVal, InputJoy**OffVal, InputJoy**MaxVal: Normally a joystick axis
+will send values to Supermodel that fall within the range -32768 to +32767,
+with 0 representing the central or 'off' position.  However, in some cases an
+axis may behave differently.  This has been observed with certain steering
+wheels that have their pedals configured in a 'split axis' mode.  The pedals
 invert their range so that they send -32768 when released and +32767 when fully
-depressed.  In order for Supermodel to be able to handle such cases the 
+depressed.  In order for Supermodel to be able to handle such cases the
 minimum, off, and maximum values of the axis can be specified with these three
 options.  The default values are MinVal -32768, OffVal 0, and MaxVal 32767 but
 with the pedal example just given, they would need to be set to MinVal 32767,
 OffVal 32767, and MaxVal -32768.
 
-In most cases it will be unecessary to alter the DeadZone, MinVal, OffVal, and 
-MaxVal options by hand as calibrating a joystick axis from within the input 
-configuration screens of Supermodel will set them automatically.  Only the 
+In most cases it will be unecessary to alter the DeadZone, MinVal, OffVal, and
+MaxVal options by hand as calibrating a joystick axis from within the input
+configuration screens of Supermodel will set them automatically.  Only the
 sensitivity option is not configured in this way.
 
 
 Additional Options:
 
 InputAutoTrigger, InputAutoTrigger2: When playing light gun games such as 'The
-Lost World', the gun must be pointed off-screen and then fired in order to 
+Lost World', the gun must be pointed off-screen and then fired in order to
 reload.  With a mouse and the default mappings, this requires clicking both the
 right and left mouse buttons.  In order to be able to reload the gun with just
-a single click of the right mouse button, enable these options for players 1 
+a single click of the right mouse button, enable these options for players 1
 and 2 by setting them to 1.  By default they are disabled (value 0).
 
 Enabling these options is also recommended when playing with PC light guns as
-these often map the action "point off screen and press trigger" to a single 
-right mouse button click.  Supermodel has been tested successfully with 
-UltiMarc's AimTrak light-guns.  In order to use dual PC light-guns for two 
-player games, the Raw Input system must be selected with the command line 
+these often map the action "point off screen and press trigger" to a single
+right mouse button click.  Supermodel has been tested successfully with
+UltiMarc's AimTrak light-guns.  In order to use dual PC light-guns for two
+player games, the Raw Input system must be selected with the command line
 option '-input-system=rawinput' and the input mappings configured for each gun.
 
 
@@ -1088,11 +1088,11 @@ option '-input-system=rawinput' and the input mappings configured for each gun.
 =====================================
 
 All valid command line settings are listed here, ordered by category.  Defaults
-are given under the assumption that they have not been changed in the 
+are given under the assumption that they have not been changed in the
 configuration file.
 
 Square brackets ('[' and ']') indicate optional parameters.  Angled brackets
-('<' and '>') indicate mandatory parameters.  Do not type the brackets.  No 
+('<' and '>') indicate mandatory parameters.  Do not type the brackets.  No
 spaces may appear inside of an option.  For example, 'supermodel game.zip
 -ppc-frequency=25' is correct but 'supermodel game.zip -ppc-frequency = 25' is
 not.  All options are case sensitive.
@@ -1100,160 +1100,160 @@ not.  All options are case sensitive.
 
     Option:         -?
                     -h
-    
-    Description:    Prints a message with an overview of the command line 
+
+    Description:    Prints a message with an overview of the command line
                     options and how to run Supermodel.
-                    
+
     ----------------
-    
+
     Option:         -print-games
-    
+
     Description:    Lists all supported ROM sets.  Not all supported ROM sets
                     are playable yet.
-    
+
     ----------------
-    
+
     Option:         -no-threads
-    
+
     Description:    Disables multi-threading.  When enabled (the default), the
                     PowerPC, graphics rendering, and user interface are run in
-                    one thread, sound emulation in a second thread, and the 
-                    drive board in a third.  It is enabled by default.  On 
-                    single-core systems, multi-threading adds overhead and 
-                    slows Supermodel down but can make audio sound a bit 
+                    one thread, sound emulation in a second thread, and the
+                    drive board in a third.  It is enabled by default.  On
+                    single-core systems, multi-threading adds overhead and
+                    slows Supermodel down but can make audio sound a bit
                     smoother.
-    
+
     ----------------
-    
+
     Option:         -ppc-frequency=<f>
-    
-    Description:    Sets the PowerPC frequency in MHz.  The default is 50. 
+
+    Description:    Sets the PowerPC frequency in MHz.  The default is 50.
                     Higher frequencies will allow games to do more processing
-                    per frame, making them run faster in 'virtual' time, but 
+                    per frame, making them run faster in 'virtual' time, but
                     may slow down Supermodel on weaker computers.  Supermodel's
                     performance can frequently be improved by lowering the
                     PowerPC frequency (25 MHz works in many games).  In some
-                    games, this will cause timing problems and jerky 
+                    games, this will cause timing problems and jerky
                     performance.  The optimum frequency will vary from game to
-                    game and system to system.  Valid values for <f> are 1 to 
+                    game and system to system.  Valid values for <f> are 1 to
                     1000.
-    
+
     ----------------
-    
+
     Option:         -fullscreen
-    
+
     Description:    Runs in full screen mode.  The default is to run in a
                     window.
-    
+
     ----------------
-    
+
     Option:         -no-throttle
-    
+
     Description:    Disables 60 FPS throttling.  The Model 3 runs at a 60 Hz
-                    refresh rate, which Supermodel enforces if this option is 
-                    omitted.  Unthrottled operation may not work on some 
+                    refresh rate, which Supermodel enforces if this option is
+                    omitted.  Unthrottled operation may not work on some
                     systems because graphics drivers may lock the refresh rate
                     on their own.
-    
+
     ----------------
-    
+
     Option:         -print-gl-info
-    
+
     Description:    Prints OpenGL driver information and quits.
-    
+
     ----------------
-    
+
     Option:         -res=<x>,<y>
-    
+
     Description:    Resolution of the display in pixels, with <x> being width
-                    and <y> being height.  The default is 496x384, the Model 
+                    and <y> being height.  The default is 496x384, the Model
                     3's native resolution.
-    
+
     ----------------
-    
+
     Option:         -show-fps
-    
+
     Description:    Shows the frame rate in the window title bar.
-    
+
     ----------------
-    
+
     Option:         -frag-shader=<file>
                     -vert-shader=<file>
-                    
+
     Description:    Allows external fragment and vertex shaders to be used for
-                    3D rendering.  <file> is the file path.  Files should be 
-                    ASCII text files containing GLSL source code.  The file 
-                    extension is not important.  By default, Supermodel's 
-                    internal shader programs are used.  These options are 
-                    intended for future extensibility and for use by 
+                    3D rendering.  <file> is the file path.  Files should be
+                    ASCII text files containing GLSL source code.  The file
+                    extension is not important.  By default, Supermodel's
+                    internal shader programs are used.  These options are
+                    intended for future extensibility and for use by
                     developers.
-    
+
     ----------------
-    
+
     Option:         -flip-stereo
-    
+
     Description:    Swaps the left and right audio channels.
-    
+
     ----------------
-    
+
     Option:         -no-dsb
-    
+
     Description:    Disables Digital Sound Board (MPEG music) emulation.  See
                     the section on audio settings for more information.
-    
+
     ----------------
-    
+
     Option:         -no-sound
-    
+
     Description:    Disables sound board (sound effects) emulation.  See the
                     section on audio settings for more information.
-    
+
     ----------------
-    
+
     Option:         -music-volume=<v>
                     -sound-volume=<v>
-    
+
     Description:    Specifies the volume of MPEG music produced by the Digital
-                    Sound Board and the audio produced by the sound board in 
+                    Sound Board and the audio produced by the sound board in
                     percent.  The default is 100, which is full volume, and the
                     valid range of <v> is 0 (muted) to 200.  See the section on
                     audio settings for more information.
-    
+
     ----------------
-    
+
     Option:         -config-inputs
-    
+
     Description:    Launches the interacive input configuration utility in the
                     command prompt window.  Allows controls to be remapped.
                     See the section on controls for more information.
-    
+
     ----------------
-    
+
     Option:         -force-feedback
-    
+
     Description:    Enables force feedback.  Force feedback is only supported
                     in a few games (see the section on force feedback for more
                     details).  Available only on Windows.
-    
+
     ----------------
-    
+
     Option:         -input-system=<s>
-    
+
     Description:    Sets the input system.  This is only available on Windows,
                     where the default is 'dinput' (DirectInput).  SDL is used
                     for all other platforms.  Valid choices for <s> are:
-                    
+
                         dinput      DirectInput.
                         xinput      XInput
                         rawinput    Raw Input.
                         sdl         SDL.
-                        
+
                     See the section on input systems for more details.
-    
+
     ----------------
-    
+
     Option:         -print-inputs
-    
+
     Description:    Prints the current input configuration.
 
 
@@ -1266,176 +1266,176 @@ Please read the section describing the configuration file for more information.
 
 All settings are case sensitive.
 
-    
+
     Name:           MultiThreaded
-    
+
     Argument:       Integer.
-    
+
     Description:    If set to 1, enables multi-threading; if set to 0, runs all
                     emulation in a single thread.  Read the description of the
                     '-no-threads' command line option for more information.
-                    
+
     ----------------
-    
+
     Name:           PowerPCFrequency
-    
+
     Argument:       Integer.
-    
-    Description:    The PowerPC frequency in MHz.  The default is 50.  
+
+    Description:    The PowerPC frequency in MHz.  The default is 50.
                     Equivalent to the '-ppc-frequency' command line option.
-                    
+
     ----------------
-    
+
     Name:           FullScreen
-    
+
     Argument:       Integer.
-    
+
     Description:    If set to 1, runs in full screen mode; if set to 0, runs in
-                    a window.  Disabled by default.  Equivalent to the 
+                    a window.  Disabled by default.  Equivalent to the
                     '-fullscreen' command line option.
 
     ----------------
-    
+
     Name:           ShowFrameRate
-    
+
     Argument:       Integer.
-    
+
     Description:    Shows the frame rate in the window title bar when set to 1.
                     If set to 0, the frame rate is not computed.  Disabled by
                     default.  Equivalent to the '-show-fps' command line
                     option.
 
     ----------------
-    
+
     Name:           Throttle
-    
+
     Argument:       Integer.
-    
+
     Description:    Controls 60 FPS throttling.  It is enabled by setting to 1
                     and disabled by setting to 0.  For more information, read
                     the description of the '-no-throttle' command line option.
 
     ----------------
-    
+
     Name:           XResolution
                     YResolution
-    
+
     Argument:       Integer.
-    
+
     Description:    Resolution of the display in pixels.  The default is
                     496x384, the Model 3's native resolution.  Equivalent to
                     the '-res' command line option.
 
     ----------------
-    
+
     Name:           FragmentShader
                     VertexShader
-    
+
     Argument:       String.
-    
+
     Description:    Path to the external fragment or vertex shader file to use
-                    for 3D  rendering.  By default, these are not set and the 
+                    for 3D  rendering.  By default, these are not set and the
                     internal default shaders are used.  These are equivalent to
                     the '-frag-shader' and '-vert-shader' command line options.
 
     ----------------
-    
+
     Name:           EmulateDSB
-    
+
     Argument:       Integer.
-    
+
     Description:    Emulates the Digital Sound Board if set to 1, disables it
                     if set to 0.  See the section on audio settings for more
-                    information.  A setting of 0 is equivalent to the 
-                    '-no-dsb' command line option. 
+                    information.  A setting of 0 is equivalent to the
+                    '-no-dsb' command line option.
 
     ----------------
-    
+
     Name:           EmulateSound
-    
+
     Argument:       Integer.
-    
-    Description:    Emulates the sound board and its two Sega Custom Sound 
+
+    Description:    Emulates the sound board and its two Sega Custom Sound
                     Processors if set to 1, disables it if set to 0.  See the
                     section on audio settings for more information.  A setting
                     of 0 is equivalent to the '-no-sound' command line option.
-    
+
     ----------------
-    
+
     Name:           FlipStereo
-    
+
     Argument:       Integer.
-    
+
     Description:    Swaps the left and right stereo channels if set to 1.  If
                     set to 0, outputs the channels normally.  Disabled by
-                    default.  A setting of 1 is equivalent to using the 
+                    default.  A setting of 1 is equivalent to using the
                     '-flip-stereo' command line option.
-                    
+
     ----------------
-    
+
     Name:           MusicVolume
                     SoundVolume
-    
+
     Argument:       Integer.
-    
+
     Description:    Specifies the volume of MPEG music produced by the Digital
-                    Sound Board and the audio produced by the sound board in 
+                    Sound Board and the audio produced by the sound board in
                     percent.  The default is 100, which is full volume, and the
                     valid range is 0 (muted) to 200%.  See the section on audio
                     settings for more information.  The equivalent command line
                     options are '-music-volume' and '-sound-volume'.
 
     ----------------
-    
+
     Name:           ForceFeedback
-    
+
     Argument:       Integer.
-    
+
     Description:    If set to 1, enables force feedback emulation; if set to 0,
-                    disables it (the default behavior).  Equivalent to the 
-                    '-force-feedback' command line option.  Available only on 
+                    disables it (the default behavior).  Equivalent to the
+                    '-force-feedback' command line option.  Available only on
                     Windows.
-    
+
     ----------------
-    
+
     Name:           DirectInputConstForceMax
                     DirectInputFrictionMax
                     DirectInputSelfCenterMax
                     DirectInputVibrateMax
-    
+
     Argument:       Integer value.
-    
+
     Description:    Sets strength of the four DirectInput force feedback
-                    effects in percent.  Default is 100, indicating full 
+                    effects in percent.  Default is 100, indicating full
                     strength.  Values exceeding 100% will distort the effects.
                     Available only on Windows.
-    
+
     ----------------
-    
+
     Name:           XInputConstForceMax
                     XInputVibrateMax
-    
+
     Argument:       Integer value.
-    
+
     Description:    Sets strength of XInput force feedback effects in percent.
                     Default is 100, indicating full strength.  Values exceeding
-                    100% will distort the effects.  The constant force effect 
+                    100% will distort the effects.  The constant force effect
                     is simulated using vibration.  Available only on Windows.
-    
+
     ----------------
-    
+
     Name:           XInputConstForceThreshold
-    
+
     Argument:       Integer value.
-    
+
     Description:    Minimum strength above which a Model 3 constant force
-                    command will be simulated on an XInput device.  
+                    command will be simulated on an XInput device.
                     XInputConstForceMax determines the vibration strength for
                     this effect.  The default value is 30.  Available only on
                     Windows.
-                    
+
     ----------------
-        
+
     Names:          InputStart1
                     InputStart2
                     InputCoin1
@@ -1444,15 +1444,15 @@ All settings are case sensitive.
                     InputServiceB
                     InputTestA
                     InputTestB
-                
+
     Argument:       String.
-    
+
     Description:    Mappings for common inputs: player 1 and 2 Start buttons,
                     both coin slots, and both Service and Test buttons.  Can
                     only be set in the 'Global' section.
-                    
+
     ----------------
-                    
+
     Names:          InputJoyDown
                     InputJoyDown2
                     InputJoyLeft
@@ -1461,16 +1461,16 @@ All settings are case sensitive.
                     InputJoyRight2
                     InputJoyUp
                     InputJoyUp2
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for 4-way digital joysticks (players 1 and 2).
                     These controls appear in 'Virtua Fighter 3', 'Fighting
                     Vipers 2', 'Spikeout', etc.  Can only be set in the
                     'Global' section.
-    
+
     ----------------
-    
+
     Names:          InputEscape
                     InputEscape2
                     InputGuard
@@ -1479,132 +1479,132 @@ All settings are case sensitive.
                     InputKick2
                     InputPunch
                     InputPunch2
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for fighting game buttons (players 1 and 2).  Can
                     only be set in the 'Global' section.
 
     ----------------
-    
+
     Names:          InputBeat
                     InputCharge
                     InputJump
                     InputShift
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for 'Spikeout' and 'Spikeout Final Edition'
                     buttons.  Can only be set in the 'Global' section.
-                    
+
     ----------------
-    
+
     Name:           InputLongPass
                     InputLongPass2
                     InputShortPass
                     InputShortPass2
                     InputShoot
                     InputShoot2
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for the 'Virtua Striker 2' series of games
-                    (players 1 and 2).  Can only be set in the 'Global' 
+                    (players 1 and 2).  Can only be set in the 'Global'
                     section.
-                    
+
     ----------------
-                    
+
     Name:           InputSteering
-    
+
     Argument:       String.
-    
-    Description:    Mapping for the analog steering wheel axis, used in all 
+
+    Description:    Mapping for the analog steering wheel axis, used in all
                     driving games.  Can only be set in the 'Global' section.
-    
+
     ----------------
-    
+
     Name:           InputSteeringLeft
                     InputSteeringRight
-    
+
     Argument:       String.
-    
-    Description:    Mappings for digital control of the steering wheel, 
+
+    Description:    Mappings for digital control of the steering wheel,
                     intended for users who do not have an analog controller.
                     Can only be set in the 'Global' section.
-                    
+
     ----------------
-    
+
     Name:           InputBrake
                     InputAccelerator
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for brake and accelerator pedals used in driving
                     games.  These are analog axes but can also be mapped to
                     digital inputs if needed.  Can only be set in the 'Global'
                     section.
-                    
+
     ----------------
-    
+
     Name:           InputGearShift1
                     InputGearShift2
                     InputGearShift3
                     InputGearShift4
                     InputGearShiftN
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for the gear box used in driving games.  In games
                     with only two gears (e.g. 'Le Mans 24'), InputGearShift1
-                    maps to 'Up' and InputGearShift2 to 'Down'.  A neutral 
+                    maps to 'Up' and InputGearShift2 to 'Down'.  A neutral
                     position can also be selected.  Can only be set in the
                     'Global' section.
-                    
+
     ----------------
-    
+
     Name:           InputGearShiftDown
                     InputGearShiftUp
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for sequential shifting.  These allow gears to be
                     selected sequentially: N, 1, 2, 3, 4.  Can only be set in
                     the 'Global' section.
 
     ----------------
-                                            
+
     Name:           InputVR1
                     InputVR2
                     InputVR3
                     InputVR4
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for the 'VR' (color-coded view select) buttons in
                     racing games (e.g. 'Scud Race', 'Daytona USA 2', etc.)  Can
                     only be set in the 'Global' section.
-    
+
     ----------------
-    
+
     Name:           InputViewChange
-    
+
     Argument:       String.
-    
+
     Description:    Mapping for the view change button used in 'Sega Rally 2',
                     'Dirt Devils', and 'Emergency Car Ambulance'.  Can only be
                     set in the 'Global' section.
-    
+
     ----------------
-    
+
     Name:           InputHandBrake
-    
+
     Argument:       String.
-    
+
     Description:    Mapping for the hand brake button used in 'Sega Rally 2'.
                     Can only be set in the 'Global' section.
 
     ----------------
-    
+
     Name:           InputTwinJoyCrouch
                     InputTwinJoyForward
                     InputTwinJoyJump
@@ -1613,16 +1613,16 @@ All settings are case sensitive.
                     InputTwinJoyStrafeRight
                     InputTwinJoyTurnLeft
                     InputTwinJoyTurnRight
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for 'macro' commands for 'Virtual On Oratorio
                     Tangram'.  These allow movements to be mapped to single
                     digital inputs and do not require the use of two joysticks.
                     Can only be set in the 'Global' section.
-    
+
     ----------------
-    
+
     Name:           InputTwinJoyDown1
                     InputTwinJoyDown2
                     InputTwinJoyLeft1
@@ -1631,64 +1631,64 @@ All settings are case sensitive.
                     InputTwinJoyRight2
                     InputTwinJoyUp1
                     InputTwinJoyUp2
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for the individual joysticks used by 'Virtual On
                     Oratorio Tangram'.  The left stick is stick #1 and the
-                    right stick is #2.  Can only be set in the 'Global' 
+                    right stick is #2.  Can only be set in the 'Global'
                     section.
-                    
+
     ----------------
-    
+
     Name:           InputTwinJoyShot1
                     InputTwinJoyShot2
                     InputTwinJoyTurbo1
                     InputTwinJoyTurbo2
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for the shot (trigger) and turbo buttons located
                     on the left (1) and right (2) joysticks in 'Virtual On
-                    Oratorio Tangram'.  Can only be set in the 'Global' 
+                    Oratorio Tangram'.  Can only be set in the 'Global'
                     section.
-                    
+
     ----------------
-    
+
     Name:           InputAnalogJoyDown
                     InputAnalogJoyLeft
                     InputAnalogJoyRight
                     InputAnalogJoyUp
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for digital control of the analog joystick used in
                     'Star Wars Trilogy'.  Two inputs are provided for the two
                     directions available on each axis.  Can only be set in the
                     'Global' section.
-    
+
     ----------------
-    
+
     Name:           InputAnalogJoyX
                     InputAnalogJoyY
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for X and Y axes of the analog joystick in 'Star
                     Wars Trilogy'.  Can only be set in the 'Global' section.
-    
+
     ----------------
-    
+
     Name:           InputAnalogJoyTrigger
                     InputAnalogJoyEvent
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for the trigger and Event button in 'Star Wars
                     Trilogy'.  Can only be set in the 'Global' section.
-                    
+
     ----------------
-    
+
     Name:           InputGunDown
                     InputGunDown2
                     InputGunLeft
@@ -1697,68 +1697,68 @@ All settings are case sensitive.
                     InputGunRight2
                     InputGunUp
                     InputGunUp2
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for digital control of the light guns in 'The Lost
                     World'.  Inputs for motion in each direction are provided.
                     Can only be set in the 'Global' section.
-                    
+
     ----------------
-    
+
     Name:           InputGunX
                     InputGunX2
                     InputGunY
                     InputGunY2
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for both analog axes of the light guns in 'The
                     Lost World'.  Can only be set in the 'Global' section.
 
     ----------------
-    
+
     Name:           InputOffscreen
                     InputOffscreen2
                     InputTrigger
                     InputTrigger2
-    
+
     Argument:       String.
-    
+
     Description:    Mappings for the light gun triggers and off-screen
                     controls in 'The Lost World'.  The off-screen button aims
                     the light gun off-screen while it is pressed, which makes
-                    re-loading possible.  Can only be set in the 'Global' 
+                    re-loading possible.  Can only be set in the 'Global'
                     section.
 
     ----------------
-    
+
     Name:           InputAutoTrigger
                     InputAutoTrigger2
-    
+
     Argument:       Integer.
-    
-    Description:    When set to 1, the off-screen button will also 
-                    automatically reload (no need to pull the trigger).  Can 
+
+    Description:    When set to 1, the off-screen button will also
+                    automatically reload (no need to pull the trigger).  Can
                     only be set in the 'Global' section.
-                    
+
     ----------------
-    
+
     Name:           InputKeySensitivity
-    
+
     Argument:       Integer.
-    
+
     Description:    The rate at which analog control values increase/decrease
                     when controlled by a key.  Valid range is 1-100, with 1
                     being the least sensitive (slowest response).  The default
                     is 25.  Can only be set in the 'Global' section.
-                    
+
     ----------------
-    
+
     Name:           InputKeyDecaySpeed
-    
+
     Argument:       Integer.
-    
+
     Description:    The rate at which analog control values return to their
                     rest or 'off' position after a key has been released.  The
                     value is expressed as a percentage of the attack speed,
@@ -1766,26 +1766,26 @@ All settings are case sensitive.
                     controls take twice as long to return to their rest state
                     as they do to reach their minimum/maximum values.  Can only
                     be set in the 'Global' section.
-    
+
     ----------------
-    
+
     Name:           InputMouseXDeadZone
                     InputMouseYDeadZone
-    
+
     Argument:       Integer.
-    
+
     Description:    Specifies a rectangular region in the center of the display
                     within which the mouse is considered inactive.  Expressed
                     as percentages, from 0-99, of the width and height of the
                     display.  The default values are 0, which disable this
                     option.  Can only be set in the 'Global' section.
-                    
+
     ----------------
-    
+
     Name:           InputJoy**DeadZone
-    
+
     Argument:       Integer.
-    
+
     Description:    '**' must be the joystick number and axis (eg. '1X', '2RZ',
                     etc.).  If the joystick number is omitted, the setting will
                     apply to all joysticks.  Specifies the dead zone as a
@@ -1793,39 +1793,39 @@ All settings are case sensitive.
                     the dead zone, the joystick is inactive.  This is useful
                     for joysticks that are 'noisy' when at rest.  Can only be
                     set in the 'Global' section.
-                    
+
     ----------------
-    
+
     Name:           InputJoy**Saturation
-    
+
     Argument:       Integer.
-    
+
     Description:    '**' must be the joystick number and axis (eg. '1X', '2RZ',
                     etc.).  If the joystick number is omitted, the setting will
-                    apply to all joysticks.  Specifies the saturation, the 
+                    apply to all joysticks.  Specifies the saturation, the
                     position at which the joystick is interpreted as being in
-                    its most extreme position, as a percentage of the total 
+                    its most extreme position, as a percentage of the total
                     range of the axis, from 0-200.  Values exceeding 100% mean
                     the axis will not use its full range.  A value of 200 means
-                    that the range will be halved (fully pressed will only 
+                    that the range will be halved (fully pressed will only
                     register as 50%).  The default is 100, a 1-to-1 mapping.
                     Can only be set in the 'Global' section.
-    
+
     ----------------
-    
+
     Name:           InputJoy**MinVal
                     InputJoy**MaxVal
                     InputJoy**OffVal
-    
+
     Argument:       Integer.
-    
+
     Description:    '**' must be the joystick number and axis (eg. '1X', '2RZ',
                     etc.).  If the joystick number is omitted, the setting will
                     apply to all joysticks.  Specifies the maximum, minimum, or
                     offset value of an axis.  The range is -32768 to 32768.  By
-                    default, MinVal is -32768, OffVal is 0, and MaxVal is 
+                    default, MinVal is -32768, OffVal is 0, and MaxVal is
                     32767.  Can only be set in the 'Global' section.
-    
+
 
 =================================
   14. Compiling the Source Code
@@ -1835,25 +1835,25 @@ First, ensure that OpenGL, SDL (http://www.libsdl.org), and zlib
 (http://zlib.net) are installed. GLEW (http://glew.sourceforge.net) is
 included in the source tree and does not need to be installed separately.
 
-Next, extract the Supermodel source code and copy the appropriate Makefile 
+Next, extract the Supermodel source code and copy the appropriate Makefile
 from the Makefiles/ directory to the base directory (that is, the one above
-Src/ and Makefiles/).  Makefiles for 32-bit Windows (Microsoft Visual C++ 
+Src/ and Makefiles/).  Makefiles for 32-bit Windows (Microsoft Visual C++
 2008), Linux/UNIX (GCC), and Mac OS X (GCC) are provided, all requiring GNU
 Make.  For Windows developers, MinGW (http://www.mingw.org) provides GNU Make.
-Alternatively, you can write a Makefile compatible with Microsoft Nmake and 
-submit it for inclusion in the next release. ;)  Consult the Visual Studio 
+Alternatively, you can write a Makefile compatible with Microsoft Nmake and
+submit it for inclusion in the next release. ;)  Consult the Visual Studio
 documentation to learn how to configure the Microsoft compiler for command line
 operation.
 
 Edit SDL_LIBPATH and SDL_INCLUDEPATH to reflect the location of the SDL
-development library and header files.  This should only be necessary for 
+development library and header files.  This should only be necessary for
 Windows.  The UNIX and Mac OS X Makefiles should be able to automatically
 locate SDL if it was installed properly.
 
 On Windows, Supermodel is compiled with the multi-threaded, static version of
-the run-time library (/MT option).  However, the SDL and zlib development 
+the run-time library (/MT option).  However, the SDL and zlib development
 libraries, and the SDL run-time DLL, are distributed for use with the dynamic
-run-time (/MD option).  They must all be recompiled using /MT to work with 
+run-time (/MD option).  They must all be recompiled using /MT to work with
 Supermodel.  Alternatively, Supermodel's Makefile can be edited to use the /MD
 option.
 
@@ -1868,13 +1868,13 @@ When everything is ready, rename the appropriate Makefile to 'Makefile' and run
 The official Supermodel web site is:
 
     http://www.Supermodel3.com
-    
+
 Questions?  Comments?  Contributions?  Your feedback is welcome!  A discussion
 forum is available at the web site and the primary author, Bart Trzynadlowski,
 can be reached by email at:
 
     supermodel.emu@gmail.com
-    
+
 We ask that you remain mindful of the following courtesies:
 
     - Do NOT ask about ROMs.
@@ -1905,7 +1905,7 @@ we would like to thank:
     - Andrew Gardner, for fruitful discussion
     - Chad Reker, Alex Corrigan, pcvideogamer, and Groni, for being especially
       thorough play-testers
-    - Charles MacDonald, for his helpful description of the System 24 tile 
+    - Charles MacDonald, for his helpful description of the System 24 tile
       generator
 
 Supermodel includes code from the following projects:
@@ -1914,32 +1914,32 @@ Supermodel includes code from the following projects:
     - minizip:                  http://www.winimage.com/zLibDll/minizip.html
     - YAZE-AG:                  http://www.mathematik.uni-ulm.de/users/ag/yaze/
     - Amp by Tomislav Uzalec
-    - The OpenGL Extension Wrangler Library (GLEW):  
+    - The OpenGL Extension Wrangler Library (GLEW):
                                 http://glew.sourceforge.net
-    
+
 The OpenGL Extension Wrangler Library
 Copyright (C) 2002-2008, Milan Ikits <milan ikits[]ieee org>
 Copyright (C) 2002-2008, Marcelo E. Magallon <mmagallo[]debian org>
 Copyright (C) 2002, Lev Povalahev
 All rights reserved.
 
-Redistribution and use in source and binary forms, with or without 
+Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are met:
 
-* Redistributions of source code must retain the above copyright notice, 
+* Redistributions of source code must retain the above copyright notice,
   this list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, 
-  this list of conditions and the following disclaimer in the documentation 
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.
-* The name of the author may be used to endorse or promote products 
+* The name of the author may be used to endorse or promote products
   derived from this software without specific prior written permission.
 
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
diff --git a/Makefiles/Makefile.OSX b/Makefiles/Makefile.OSX
index faae55e..bb07732 100644
--- a/Makefiles/Makefile.OSX
+++ b/Makefiles/Makefile.OSX
@@ -1,8 +1,7 @@
 ##
 ## Supermodel
 ## A Sega Model 3 Arcade Emulator.
-## Copyright 2011-2020 Bart Trzynadlowski, Nik Henson, Ian Curtis,
-##                     Harry Tuttle, and Spindizzi
+## Copyright 2003-2022 The Supermodel Team
 ##
 ## This file is part of Supermodel.
 ##
diff --git a/Makefiles/Makefile.UNIX b/Makefiles/Makefile.UNIX
index 5df12f5..d499234 100644
--- a/Makefiles/Makefile.UNIX
+++ b/Makefiles/Makefile.UNIX
@@ -1,8 +1,7 @@
 ##
 ## Supermodel
 ## A Sega Model 3 Arcade Emulator.
-## Copyright 2011-2020 Bart Trzynadlowski, Nik Henson, Ian Curtis,
-##                     Harry Tuttle, and Spindizzi
+## Copyright 2003-2022 The Supermodel Team
 ##
 ## This file is part of Supermodel.
 ##
diff --git a/Makefiles/Makefile.Win32 b/Makefiles/Makefile.Win32
index 6738071..3945411 100644
--- a/Makefiles/Makefile.Win32
+++ b/Makefiles/Makefile.Win32
@@ -1,8 +1,7 @@
 ##
 ## Supermodel
 ## A Sega Model 3 Arcade Emulator.
-## Copyright 2011-2020 Bart Trzynadlowski, Nik Henson, Ian Curtis,
-##                     Harry Tuttle, and Spindizzi
+## Copyright 2003-2022 The Supermodel Team
 ##
 ## This file is part of Supermodel.
 ##
diff --git a/Makefiles/Options.inc b/Makefiles/Options.inc
index f5761af..eaefc25 100644
--- a/Makefiles/Options.inc
+++ b/Makefiles/Options.inc
@@ -1,8 +1,7 @@
 ##
 ## Supermodel
 ## A Sega Model 3 Arcade Emulator.
-## Copyright 2011-2020 Bart Trzynadlowski, Nik Henson, Ian Curtis,
-##                     Harry Tuttle, and Spindizzi
+## Copyright 2003-2022 The Supermodel Team
 ##
 ## This file is part of Supermodel.
 ##
diff --git a/Makefiles/Rules.inc b/Makefiles/Rules.inc
index a493e13..7104d86 100644
--- a/Makefiles/Rules.inc
+++ b/Makefiles/Rules.inc
@@ -1,8 +1,7 @@
 ##
 ## Supermodel
 ## A Sega Model 3 Arcade Emulator.
-## Copyright 2011-2020 Bart Trzynadlowski, Nik Henson, Ian Curtis,
-##                     Harry Tuttle, and Spindizzi
+## Copyright 2003-2022 The Supermodel Team
 ##
 ## This file is part of Supermodel.
 ##
@@ -218,7 +217,7 @@ INCLUDE_DIRS = $(sort $(foreach file,$(SRC_FILES),$(dir	$(file))))
 all:	$(BIN_DIR)/$(OUTFILE)
 
 #
-# Release targets: used only to create official builds stamped with the SVN
+# Release targets: used only to create official builds stamped with the Git
 # version number. Double-colon rules should force ordered execution.
 # The automated build script relies on these -- don't modify their output!
 #
@@ -230,7 +229,7 @@ release:: print_message
 release:: clean
 release:: all
 set_version:
-	$(eval VERSION = 0.3a-svn-$(shell svnversion --no-newline))
+	$(eval VERSION = $(subst ',,0.3a-git-$(shell git rev-parse --short HEAD --sq)))
 	$(eval SUPERMODEL_BUILD_FLAGS += -DSUPERMODEL_VERSION=\"$(VERSION)\")
 print_message:
 	$(info Building Supermodel Version $(VERSION))
diff --git a/Src/OSD/SDL/Main.cpp b/Src/OSD/SDL/Main.cpp
index b66fc01..948e81b 100644
--- a/Src/OSD/SDL/Main.cpp
+++ b/Src/OSD/SDL/Main.cpp
@@ -1,8 +1,7 @@
 /**
  ** Supermodel
  ** A Sega Model 3 Arcade Emulator.
- ** Copyright 2011-2021 Bart Trzynadlowski, Nik Henson, Ian Curtis,
- **                     Harry Tuttle, and Spindizzi
+ ** Copyright 2003-2022 The Supermodel Team
  **
  ** This file is part of Supermodel.
  **
@@ -1497,8 +1496,7 @@ static Util::Config::Node DefaultConfig()
 static void Title(void)
 {
   puts("Supermodel: A Sega Model 3 Arcade Emulator (Version " SUPERMODEL_VERSION ")");
-  puts("Copyright 2011-2022 by Bart Trzynadlowski, Nik Henson, Ian Curtis, Harry Tuttle,");
-  puts("                       Spindizzi, gm_mathew, and njz3\n");
+  puts("Copyright 2003-2022 by The Supermodel Team");
 }
 
 static void Help(void)