Supermodel/Src/Model3/TileGen.h

/**
 ** Supermodel
 ** A Sega Model 3 Arcade Emulator.
 ** Copyright 2011-2012 Bart Trzynadlowski, Nik Henson 
 **
 ** This file is part of Supermodel.
 **
 ** Supermodel is free software: you can redistribute it and/or modify it under
 ** the terms of the GNU General Public License as published by the Free 
 ** Software Foundation, either version 3 of the License, or (at your option)
 ** any later version.
 **
 ** Supermodel is distributed in the hope that it will be useful, but WITHOUT
 ** ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 ** FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 ** more details.
 **
 ** You should have received a copy of the GNU General Public License along
 ** with Supermodel.  If not, see <http://www.gnu.org/licenses/>.
 **/
 
/*
 * TileGen.h
 * 
 * Header file defining the CTileGen (tile generator device) class.
 */

#ifndef INCLUDED_TILEGEN_H
#define INCLUDED_TILEGEN_H

#include "IRQ.h"
#include "Graphics/Render2D.h"

/*
 * CTileGen:
 *
 * Tile generator device. The Model 3's tile generator handles not only the 2D
 * tile map layers but also seems to control video output and VBL IRQs.
 */
class CTileGen
{
public:
	/*
	 * SaveState(SaveState):
	 *
	 * Saves an image of the current device state.
	 *
	 * Parameters:
	 *		SaveState	Block file to save state information to.
	 */
	void SaveState(CBlockFile *SaveState);

	/*
	 * LoadState(SaveState):
	 *
	 * Loads and a state image.
	 *
	 * Parameters:
	 *		SaveState	Block file to load state information from.
	 */
	void LoadState(CBlockFile *SaveState);
	
	/*
	 * BeginVBlank(void):
	 *
	 * Must be called before the VBlank starts.
	 */
	void BeginVBlank(void);
	
	/*
	 * EndVBlank(void)
	 *
	 * Must be called after the VBlank finishes.
	 */
	void EndVBlank(void);

	/*
	 * SyncSnapshots(void):
	 *
	 * Syncs the read-only memory snapshots with the real ones so that rendering
	 * of the current frame can begin in the render thread.  Must be called at the
	 * end of each frame when both the render thread and the PPC thread have finished
	 * their work.  If multi-threaded rendering is not enabled, then this method does
	 * nothing.
	 */
	UINT32 SyncSnapshots(void);

	/*
	 * BeginFrame(void):
	 *
	 * Prepares to render a new frame.  Must be called once per frame prior to
	 * drawing anything and must only access read-only snapshots and variables
   * since it may be running in a separate thread.
   *
   * Invokes the underlying 2D renderer.
	 */
	void BeginFrame(void);

  /*
   * PreRenderFrame(void):
   *
   * Draws the all top layers (above 3D graphics) and bottom layers (below 3D
   * graphics) but does not yet display them. May send data to the GPU.
   *
   * Invokes the equivalent method in the underlying 2D renderer.
   */
  void PreRenderFrame(void);

  /*
   * RenderFrameBottom(void):
   *
   * Overwrites the color buffer with bottom surface that was pre-rendered by
   * the last call to PreRenderFrame().
   *
   * Invokes the equivalent method in the underlying 2D renderer.
   */
  void RenderFrameBottom(void);

  /*
   * RenderFrameTop(void):
   *
   * Draws the top surface (if it exists) that was pre-rendered by the last 
   * call to PreRenderFrame(). Previously drawn graphics layers will be visible
   * through transparent regions.
   *
   * Invokes the equivalent method in the underlying 2D renderer.
   */
  void RenderFrameTop(void);

	/*
	 * EndFrame(void):
	 *
	 * Signals the end of rendering for this frame.  Must be called last during
	 * the frame and must only access read-only snapshots and variables since it
	 * may be running in a separate thread.
	 *
	 * Invokes the equivalent method in the underlying 2D renderer.
	 */
	void EndFrame(void);

	/*
	 * ReadRAM8(addr):
	 * ReadRAM16(addr):
	 * ReadRAM32(addr):
	 *
	 * Reads the tile generator's little endian RAM (the word is returned with
	 * the MSB read from addr+3). If a big endian device is reading (PowerPC),
	 * the result must be manually adjusted.
	 *
	 * Parameters:
	 *		addr	Address in tile generator RAM. Caller must ensure it is 
	 *				clamped to the range 0x000000 to 0x11FFFF because this
	 *				function does not.
	 *
	 * Returns:
	 *		Data from the RAM address.
	 */
	uint8_t ReadRAM8(unsigned addr);
	uint16_t ReadRAM16(unsigned addr);
	uint32_t ReadRAM32(unsigned addr);
	
	/*
	 * WriteRAM8(addr, data):
	 * WriteRAM16(addr, data):
	 * WriteRAM32(addr, data):
	 *
	 * Writes to the tile generator's little endian RAM (the word's MSB is
	 * written to addr+3). If a big endian device is writing, the address and
	 * data must be adjusted manually before passing it to this function.
	 *
	 * Parameters:
	 *		addr	Address in tile generator RAM. Caller must ensure it is 
	 *				clamped to the range 0x000000 to 0x11FFFF because this
	 *				function does not.
	 *		data	The data to write.
	 */
	void WriteRAM8(unsigned addr, uint8_t data);
	void WriteRAM16(unsigned addr, uint16_t data);
	void WriteRAM32(unsigned addr, uint32_t data);
	
	/*
	 * ReadRegister(reg):
	 *
	 * Reads 32 bits of data from a (little endian) register. If a big endian
	 * device is reading, the word must be flipped.
	 *
	 * Parameters:
	 *		reg		Aligned (32 bits) register offset (0x00-0xFC).
	 *
	 * Returns:
	 *    Data read as little endian from the register.
	 */
	UINT32 ReadRegister(unsigned reg);

	/*
	 * WriteRegister(reg, data):
	 *
	 * Writes 32 bits of data to a (little endian) register. If a big endian
	 * device is writing, the word must be flipped.
	 *
	 * Parameters:
	 *		reg		Aligned (32 bits) register offset (0x00-0xFC).
	 *		data	Data to write.
	 */
	void WriteRegister(unsigned reg, UINT32 data);
	
	/*
	 * Reset(void):
	 *
	 * Resets the device. 
	 */
	void Reset(void);
	
	/*
	 * AttachRenderer(render2DPtr):
	 *
	 * Attaches a 2D renderer for the tile generator to use. This function will
	 * immediately pass along the information that a CRender2D object needs to
	 * work with.
	 *
	 * Parameters:
	 *		Render2DPtr		Pointer to a 2D renderer object.
	 */
	void AttachRenderer(CRender2D *Render2DPtr);
	
	/*
	 * Init(IRQObjectPtr):
	 *
	 * One-time initialization of the context. Must be called prior to all
	 * other members. Links the tile generator to an IRQ controller and 
	 * allocates memory for tile generator RAM.
	 *
	 * Parameters:
	 *		IRQObjectPtr	Pointer to the IRQ controller object.
	 *
	 * Returns:
	 *		OKAY is successful, otherwise FAILED if a non-recoverable error
	 *		occurred. Prints own error messages.
	 */
	bool Init(CIRQ *IRQObjectPtr);
	 
	/*
	 * CTileGen(config):
	 * ~CTileGen(void):
	 *
	 * Constructor and destructor.
	 *
   * Paramters:
   *    config  Run-time configuration. The reference should be held because
   *            this changes at run-time.
	 */
	CTileGen(const Util::Config::Node &config);
	~CTileGen(void);
	
private:
	// Private member functions
	UINT32		UpdateSnapshots(bool copyWhole);
	UINT32		UpdateSnapshot(bool copyWhole, UINT8 *src, UINT8 *dst, unsigned size, UINT8 *dirty);

  const Util::Config::Node &m_config;
  const bool m_gpuMultiThreaded;

	CIRQ		*IRQ;		// IRQ controller the tile generator is attached to
	CRender2D	*Render2D;	// 2D renderer the tile generator is attached to
	
	/*
	 * Tile generator VRAM. The upper 128KB of VRAM stores the palette data.
	 * Two palettes are computed from this based on the color offset registers:
	 * A/A' and B/B'.
	 */
	UINT8	*memoryPool;		// all memory allocated here
	UINT8   *vram;          	// 1.125MB of VRAM
	UINT32	*pal[2];			// 2 x 0x20000 byte (32K colors) palette

	// Read-only snapshots
	UINT8   *vramRO;        // 1.125MB of VRAM                       [read-only snapshot]	
	UINT32  *palRO[2];      // 2 x 0x20000 byte (32K colors) palette [read-only snapshot]
	
	// Arrays to keep track of dirty pages in memory regions
	UINT8   *vramDirty;
	UINT8   *palDirty[2];	// one for each palette

	// Registers
	UINT32	regs[64];
	UINT32  regsRO[64];     // Read-only copy of registers
	
};


#endif	// INCLUDED_TILEGEN_H