Ian Curtis
43cf6b3bbf
update spotlight code (Harry Tuttle)
2017-10-05 18:49:08 +00:00
Ian Curtis
9bac7836ed
add missing header
2017-09-30 19:05:04 +00:00
Ian Curtis
0afd9026dc
Fix the sky in one of the levels in virtua on. The problem was caused by the fact we didn't split the mesh by the fog % burn through, so all the polys had the same value. We could use a vertex attrib, but % burn through fog is so rarely used and when it is, normally every poly in the mesh has the same value.
2017-09-26 00:30:08 +00:00
Bart Trzynadlowski
55bb02d4e5
- New work-in-progress frame timing code (disabled by default, compile with NEW_FRAME_TIMING defined to activate it)
...
- New JTAG emulation, moved into its own class, CJTAG
- Removed game-specific sun clamp hacks from CNew3D (JTAG and Real3D emulation will call the appropriate method to configure this at run-time)
- Removed JTAG from Real3D save state data and reused some of that space for new state variables having to do with the internal JTAG-based config as well as new frame timing state variables
2017-09-24 20:52:48 +00:00
Ian Curtis
a3e2fb7906
Calculating the length of the vertex results in quite broken values for fogging when the vertices are traversing the view frustum. The hardware also wouldn't have been doing a square root per vertex for fogging. Simply using the z values is enough. Todo check clamping of values for the near/far planes.
2017-09-06 13:07:39 +00:00
Ian Curtis
2786d95795
add interface for sun clamp
2017-09-02 14:54:16 +00:00
Ian Curtis
266c911133
Optimise vertex data to cut down on unnecessary copying
2017-08-30 21:45:25 +00:00
Ian Curtis
165926aa06
Modern hardware does backface culling in window space by calculating the face normal for the polygon, then doing a dot product against the view vector. The real3d pro-1000 on the other hand passes a pre-calculated face normal for each polygon which is used for culling. We were using this face normal to rewind the polygons so that regular backface culling would work. This worked 99.9% of the time. However this was failing on some models in Virtua Striker. The reason was because the pre-calculated face normals being passed were actually completely different to the actual face normals for the poly (not just inverted like you would expect). This broke our code. The solution was to emulate face culling directly in the vertex shader using the pre-calculated face normals directly. Only minimally tested this but hopefully there are no obvious regressions.
2017-08-29 10:27:29 +00:00
Ian Curtis
50d1f95648
Changed fixed shaded logic for step 1.5 hw based upon Harry's findings
2017-08-25 22:40:39 +00:00
Ian Curtis
b21ed49512
cosmetic
2017-08-21 23:00:29 +00:00
Ian Curtis
cd5978773a
Harry made some important discoveries with regards to fixed shading on the model 3 (per vertex poly brightness values). Firstly values are allowed to be negative, and they are used as a drop in replacement in the standard lighting equation for the normal dot light vector. This quite radically changes the brightness in LA Machine guns, but now correctly matches the arcade.
2017-08-19 20:06:31 +00:00
Ian Curtis
0efd4dac39
Finish fixed shading for 2.0 hardware. I'm pretty sure it actually works identically to step 1.5 hardware. The oddball is LA machine guns where the viewport ambient doesn't seem to effect the brightness. But the ambient works differently in this game because it uses the unclamped light model. Still need to investigate if the diffuse factor effects fixed shading.
2017-08-15 23:21:57 +00:00
Ian Curtis
b1cc9a615d
With fixed shading, when lighting is disabled, fixed shading appears to be a flat shaded version based upon the poly colour, instead of per vertex attributes.
2017-08-15 20:50:36 +00:00
Ian Curtis
2422caadc6
Pad struct and align on 4 byte boundary.
2017-08-15 20:45:08 +00:00
Ian Curtis
eac76f0908
simplify
2017-08-14 23:30:34 +00:00
Ian Curtis
81188bee07
fixed shading doesn't effect the alpha channel
2017-08-14 16:10:26 +00:00
Ian Curtis
c12e4c3215
Fixed shading (per vertex poly colours) on step 1.5 hardware have the viewport ambient value added to them. This fixes various shading on scud. To do this had to switch the maths to the vertex shader.
2017-08-14 09:14:06 +00:00
Ian Curtis
8f622714a7
Fix attribute locations. glBindAttribLocation must be called linking
2017-08-11 11:59:41 +00:00
Bart Trzynadlowski
a315627401
Added support for loading shaders from files for new engine and tile renderer. Changed help text to reflect new engine being default.
2017-08-11 00:41:10 +00:00
Ian Curtis
d7403afda6
use generic vertex attributes
2017-08-10 15:43:03 +00:00
Ian Curtis
57d0a513fd
Technically matrix casts are only allowed in glsl 1.2 and later
2017-08-09 23:25:01 +00:00
Ian Curtis
5709ee2659
Sometime ago I managed to work out that specular on the model3 is not real specular, and really is just an extension of diffuse lighting. But attempts were derailed by corner cases and the fact we were not handling the normals correctly. Anyway Harry managed to successfully come up with an algorithm, and coefficients that give an almost perfect match to specular on the model3, based soley on observations from video footage! He also worked out that the lighting on hardware 1.5 onwards appears to be unclamped (ie greater than 1). This quite radically changes the brightness of some of the games, but much better matches the original hardware.
2017-08-09 16:56:56 +00:00
Ian Curtis
1d338877fc
cosmetic
2017-08-03 11:05:04 +00:00
Ian Curtis
3fc28159eb
Add the unclamped light model we know exists to the shaders.
2017-08-03 10:41:18 +00:00
Ian Curtis
b1bd877b82
Ski champ for some reason is passing denormalised numbers for the modelscale. This is causing a NaN in our shader killing the lighting for these models, so we simply skip these, since they are essentially zero anyway. Thanks to Harry for finding this bug :)
2017-08-01 23:48:53 +00:00
Ian Curtis
9aa3f13777
We were force normalising the result of matrix * normal, which looked correct in most cases. But this didn't preserve the scaling of the matrix, or the scaling of the model normals which resulted in many over bright areas. On it's own this generally worked, but games like Star Wars looked quite broken. Harry correctly figured out if you scale these normals by the scaling value that is sometimes present in the culling nodes the lighting looks correct. Still more work to do to correctly figure out the model3's lighting model.
2017-07-29 16:30:30 +00:00
Ian Curtis
a9b49c1676
Implement unclamped light model based upon Harry's findings. Unknown how this is turned on/off.
2017-07-22 17:15:14 +00:00
Ian Curtis
2335f3173b
Use c++11 raw string literals
2017-07-08 10:55:14 +00:00
Ian Curtis
3efb055344
Clamp the ambient light to a max of 0.75. LA Machine guns seems to use an ambient value of 1, which is full bright for everything. But for some reason the hardware seems to treat this as ~ 0.75. This fixes various missing shading in the game. This doesn't seem to have any negative effects on other games I have tested. Clamping in the shader as we might need the full range of values for fixed shading.
2017-06-29 19:05:30 +00:00
Ian Curtis
9e9a549283
remove WIP code
2017-06-25 20:09:45 +00:00
Ian Curtis
ec3872d108
convert sun angle coordinate system outside of the shader
2017-06-25 19:50:02 +00:00
Ian Curtis
97781108e8
A second go at fixing the fixed lighting in star wars .. Fixed shading is per vertex poly colours. For some reason in star wars they are treated as unsigned values instead of signed, like in every other game. These polys are all marked with specular enabled, where as in the rest of the games they are missing this flag. That's the only difference I can find.
2017-06-21 17:04:53 +00:00
Ian Curtis
1532168af7
fix double offset
2017-06-20 21:44:58 +00:00
Ian Curtis
b00315b072
Revert previous fixed shading changes. Implement new logic for fixed shading on step 1.5 hardware based upon Harry's findings.
2017-06-20 20:13:42 +00:00
Ian Curtis
bb3c538808
remove debug code
2017-06-20 19:46:06 +00:00
Ian Curtis
260daa1b91
Fix the fix shading in star wars. Fixed shading still needs some work for mag truck and dirt devils to match the arcade.
2017-06-17 16:05:54 +00:00
Ian Curtis
73a7d2760d
cosmetic
2017-06-07 23:16:22 +00:00
Ian Curtis
1193069709
Tweak scroll fog logic again .. should fix missing 2d fogging in Spikeout.
2017-06-07 23:14:01 +00:00
Ian Curtis
45741b24d2
rewrite scroll fog logic
2017-05-06 16:47:31 +00:00
Ian Curtis
80004b0dad
Remove debug code
2017-04-25 00:31:39 +00:00
Ian Curtis
7694e4eb0c
minor culling node optimisations
2017-04-25 00:10:55 +00:00
Ian Curtis
ff936c588b
don't need cast, conversion is implicit
2017-04-20 19:46:40 +00:00
Ian Curtis
912bb0e7cf
better state handling
2017-04-20 19:43:41 +00:00
Ian Curtis
9b226ed478
parse out some culling node values
2017-04-17 10:40:07 +00:00
Ian Curtis
3c78571615
There are 2 bits in the polyheader labelled discard. When both are set ie in sega rally, the polygons are totally discarded. Scud seems to set bit 1 which seems halve the opacity.
2017-04-15 19:00:46 +00:00
Ian Curtis
21836c088c
The real3d has a flag that allows the hw to skip polygons so that they aren't rendered. Sega rally2 uses this for the dust effects. Triangles or quads that have this flag are junk, and look like random corruption if you try to draw them. We assumed polys that shared vertices with these bad polygons were also bad. It turns out the last few shared vertices in these polys were in fact valid, and thus the entire quad/triangle strip should be drawn and not discarded.
2017-04-14 23:41:11 +00:00
Ian Curtis
fc50bdee98
light parameters must be clamped (HarryTuttle)
2017-04-14 00:08:17 +00:00
Ian Curtis
391aafd4c1
Virtua fighter has a few massive polys that shouldn't be visible. It looks like these polys have a bad matrix, but the node distances are all zero. This means the bounding box that encapsulates them is of size zero. Skipping over these entirely seems to fix the issue.
2017-04-12 15:47:57 +00:00
Ian Curtis
101e43213e
cosmetic
2017-04-05 19:32:01 +00:00
Ian Curtis
edfb521a9b
Daytona seems to use this completely undocumented feature of the real3d pro-1000, the ability to invert texture colours. This patch fixes the colours on the cars, and the signs which should flash by alternating their colours.
2017-04-05 17:57:38 +00:00
