Wiki/wiki-rtd/docs/wiki_emulator_guides/yuzu/yuzu-gyro.md

How to enable Gyro working Gyro in Yuzu

Steam Deck with Gyro

This is a step by step guide on how to get working Gyro with Yuzu utilizing the Steam Deck's built in gyro.
We are looking into building this feature into RetroDECK in the future.

Prerequisites: RetroDECK Steam Deck Controller Layout

Make you have The Official RetroDECK Steam Deck Controller Layout installed and enabled.

If you don't have it read up on Step 3 from the getting started guide.

Steam Deck - RetroDECK Installation.

I already have SteamDeckGyroDSU installed:

If you already have SteamDeckGyroDSU installed you can skip Step 2 or we do recommend running the update.sh from home/deck/sdgyrodsu to make sure you have the latest version of SteamDeckGyroDSU.

Step 0: Edit the RetroDECK Layout

This step will be removed in the 0.8b update as the new profile version will have it enabled by default.

Launch RetroDECK.

• Press the Steam button - Controller Settings - Make sure that the RetroDECK Layout is Selected -
• Press Edit Layout - You will be on the Action Set - RetroDECK - Set -
• Go down to Gyro - Change it from As Joystick to Directional Pad.
• You don't need to put in any values of the menus bellow, just go back with B button to RetroDECK.

Step 1: Install SteamDeckGyroDSU

SteamDeckGyroDSU

Go to Desktop Mode and open the built in terminal Konsole from the KDE Menu (Start Menu).

Copy the following command into the terminal and hit enter:

bash <(curl -sL https://raw.githubusercontent.com/kmicki/SteamDeckGyroDSU/master/pkg/update.sh)

This will Install SteamDeckGyroDSU and also create a new folder under HOME $HOME/sdgyrodsu/ aka home/deck/sdgyrodsu

In that folder you will find two other files that is good to know about:

• update.sh - For updating SteamDeckGyroDSU

• uninstall.sh - For uninstalling SteamDeckGyroDSU

Step 2: Open Yuzu in Game Mode and go to Controls

Go to Game Mode and launch RetroDECK.

Open the RetroDECK Configurator and launch Yuzu from: Main Menu - RetroDECK Configurator - Open Emulator - Yuzu

In Yuzu:

Go to: Emulation - Configure - Controls

Step 3: Configure Controls

Press the Input Device dropdown menu select Steam Virtual Gamepad 0.

Make sure that the Motion is checked in the bottom left and click the Configure underneath the Motion checkbox.

Step 4: Test and Configure Motion

Make sure that the localhost IP-adress and port exists to the left side of the menu.

If it does not exist you will need to manually add it:

• Server: 127.0.0.1
• Port: 26760
• Press Add Server

Press the Test button to make sure you are getting data from SteamDeckGyroDSU.

If all has gone well you will get a message saying:

Successfully received data from the server.

Step 5: Go back to Controls and press the hidden motion button

Go back to Controls

Now you need to press the Motion button and Shake the Steam Deck to bind the motion.

But is the button is hidden on the Steam Decks tiny Screen as the interface is cramped.
It is right under the big controller graphics.

This easy can be done Docked with a bigger screen and just press the button as it will be shown on a larger screen and give the Steam Deck a shake.

But on the Steam Decks screen you need to do a special maneuver.

Step 5b: The Tiny Screen maneuver

On the left touch pad open the RetroDECK Radial Menu System press the Steam Deck Menu.

Here you will the buttons Tab and Enter

Press Tab until you highlight the ZR button in the interface.

Two more Tab from the ZR button is the Motion button, navigate to it.

Then press Enter and Shake the Steam Deck.

If all is working correctly the tiny box in the middle of the controller should move with your built in Gyro.

Step 6: Go back to RetroDECK

Press OK - Press the Quit Emulator Hotkey (Select + Start) or go to File - Quit Yuzu

You can now play Yuzu with motion.

Linux Desktop or Steam Deck Docked with External Gyro Enabled Controllers

Prerequisites:

• A gyro enabled external controller.

Step 1:

WIP