Supermodel/Src/Sound/SCSP.cpp

/**
 ** Supermodel
 ** A Sega Model 3 Arcade Emulator.
 ** Copyright 2011 Bart Trzynadlowski, Nik Henson
 **
 ** This file is part of Supermodel.
 **
 ** Supermodel is free software: you can redistribute it and/or modify it under
 ** the terms of the GNU General Public License as published by the Free 
 ** Software Foundation, either version 3 of the License, or (at your option)
 ** any later version.
 **
 ** Supermodel is distributed in the hope that it will be useful, but WITHOUT
 ** ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 ** FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 ** more details.
 **
 ** You should have received a copy of the GNU General Public License along
 ** with Supermodel.  If not, see <http://www.gnu.org/licenses/>.
 **/
 
/*
 * SCSP.cpp
 * 
 * WARNING: Here be dragons! Tread carefully. Enabling/disabling things may
 * break save state support.
 *
 * SCSP (Sega Custom Sound Processor) emulation. This code was generously
 * donated by ElSemi. Interfaces directly to the 68K processor through
 * callbacks. Some minor interface changes were made (external global variables
 * were removed). 
 *
 * The MIDI input buffer has been increased from 8 (which I assume is the
 * actual size) in order to accommodate Model 3's PowerPC/68K communication.
 * There is probably tight synchronization between the CPUs, with PowerPC-side
 * interrupts being generated to fill the MIDI buffer as the 68K pulls data
 * out, or there may be a UART with a large FIFO buffer. This can be simulated
 * by increasing the MIDI buffer (MIDI_STACK_SIZE).
 *
 * To-Do List
 * ----------
 * - Wrap up into an object. Remove any unused #ifdef pathways.
 */


/*	
	SEGA Custom Sound Processor (SCSP) Emulation
	by ElSemi.
	Driven by MC68000
*/

/* MAME SCSP conversion by Paul Prosser (aka Conversus W. Vans). Code by R.Belmont and ElSemi.
Fixes made: buggy timing, better envelope processing, better FM support, a more reasonable DSP emulation and all kinds of improvements.
But the new core isn't without its to-do list:
- Fix low sound volume when changing music in Harley-Davidson & LA Riders (Maybe the MVOL code from MAME will fix this?)
- Prevent music in Fighting Vipers 2 Bahn's stage from hanging with MAME's SCSP DSP core.
- Figure out why Sega Rally 2 navigator voice can cut off sometimes (Legacy DSP)

Since I (Paul) started this code overhaul in November 2019, I have also removed some obsolete features like the REVERB software effect.
It doesn't sound good at all.

Anyways credit to R. Belmont and ElSemi for the code, and for being awesome emulation Gods.
*/

#include "Supermodel.h"
#include "Sound/SCSP.h"
#include <cstdio>
#include <cstdlib>
#include <cstring>
#include <cmath>
#include "Sound/SCSPDSP.h"

static const Util::Config::Node *s_config = 0;
static bool s_multiThreaded = false;
bool legacySound; // For LegacySound (SCSP DSP) config option. 

#define USEDSP
//#define RB_VOLUME

#define MAX_SCSP	2


// These globals control the operation of the SCSP, they are no longer extern and are set through SCSP_SetBuffers(). --Bart
float SoundClock; // Originally titled SysFPS; seems to be for the sound CPU.
const float Freq = 76;
signed short *bufferl;		
signed short *bufferr;
int length;
int cnts;

signed int *buffertmpl,*buffertmpr;	// these are allocated inside this file

unsigned int srate=44100;


#define ICLIP16(x) (x<-32768)?-32768:((x>32767)?32767:x)
#define ICLIP18(x) (x<-131072)?-131072:((x>131071)?131071:x)




//#define _DEBUG

#ifndef _DEBUG
#define ErrorLogMessage
#endif

#ifndef BYTE
#define BYTE UINT8
#endif

#ifndef WORD
#define WORD UINT16
#endif

#ifndef DWORD
#define DWORD UINT32
#endif

static CMutex *MIDILock;	// for safe access to the MIDI FIFOs
static int (*Run68kCB)(int cycles);
static void (*Int68kCB)(int irq);
static void (*RetIntCB)();
static DWORD IrqTimA;
static DWORD IrqTimBC;
static DWORD IrqMidi;

unsigned short MCIEB;
unsigned short MCIPD;

#define MIDI_STACK_SIZE			128
#define MIDI_STACK_SIZE_MASK	(MIDI_STACK_SIZE-1)

static BYTE MidiOutStack[16];
static BYTE MidiOutW=0,MidiOutR=0;
static BYTE MidiStack[MIDI_STACK_SIZE];
static BYTE MidiOutFill;
static BYTE MidiInFill;
static BYTE MidiW=0,MidiR=0;
static BYTE HasSlaveSCSP=0;

static DWORD FNS_Table[0x400];
static INT32 EG_TABLE[0x400];

#ifdef RB_VOLUME
static int volume[256 * 4];	// precalculated attenuation values with some marging for enveloppe and pan levels
static int pan_left[32], pan_right[32];	// pan volume offsets
#else
static const float SDLT[8] = { -1000000.0f,-36.0f,-30.0f,-24.0f,-18.0f,-12.0f,-6.0f,0.0f };
static int LPANTABLE[0x10000];
static int RPANTABLE[0x10000];
#endif


static int TimPris[3];
static int TimCnt[3];

#define SHIFT	12
#define FIX(v)	((UINT32) ((float) (1<<SHIFT)*(v)))

#define EG_SHIFT	16
#define FM_DELAY    0


#include "SCSPLFO.cpp"

/*
	SCSP features 32 programmable slots
	that can generate FM and PCM (from ROM/RAM) sound
*/
//SLOT PARAMETERS
#define KEYONEX(slot)   ((slot->data[0x0] >> 0x0) & 0x1000)
#define KEYONB(slot)    ((slot->data[0x0] >> 0x0) & 0x0800)
#define SBCTL(slot)     ((slot->data[0x0] >> 0x9) & 0x0003)
#define SSCTL(slot)     ((slot->data[0x0] >> 0x7) & 0x0003)
#define LPCTL(slot)     ((slot->data[0x0] >> 0x5) & 0x0003)
#define PCM8B(slot)     ((slot->data[0x0] >> 0x0) & 0x0010)

#define SA(slot)        (((slot->data[0x0] & 0xF) << 16) | (slot->data[0x1]))

#define LSA(slot)       (slot->data[0x2])

#define LEA(slot)       (slot->data[0x3])

#define D2R(slot)       ((slot->data[0x4] >> 0xB) & 0x001F)
#define D1R(slot)       ((slot->data[0x4] >> 0x6) & 0x001F)
#define EGHOLD(slot)    ((slot->data[0x4] >> 0x0) & 0x0020)
#define AR(slot)        ((slot->data[0x4] >> 0x0) & 0x001F)

#define LPSLNK(slot)    ((slot->data[0x5] >> 0x0) & 0x4000)
#define KRS(slot)       ((slot->data[0x5] >> 0xA) & 0x000F)
#define DL(slot)        ((slot->data[0x5] >> 0x5) & 0x001F)
#define RR(slot)        ((slot->data[0x5] >> 0x0) & 0x001F)

#define STWINH(slot)    ((slot->data[0x6] >> 0x0) & 0x0200)
#define SDIR(slot)      ((slot->data[0x6] >> 0x0) & 0x0100)
#define TL(slot)        ((slot->data[0x6] >> 0x0) & 0x00FF)

#define MDL(slot)       ((slot->data[0x7] >> 0xC) & 0x001E) // A value of 30 is somehow needed for correct FM mix in VF3.
#define MDXSL(slot)     ((slot->data[0x7] >> 0x6) & 0x003F)
#define MDYSL(slot)     ((slot->data[0x7] >> 0x0) & 0x003F)

#define OCT(slot)       ((slot->data[0x8] >> 0xB) & 0x000F)
#define FNS(slot)       ((slot->data[0x8] >> 0x0) & 0x03FF)

#define LFORE(slot)     ((slot->data[0x9] >> 0x0) & 0x8000)
#define LFOF(slot)      ((slot->data[0x9] >> 0xA) & 0x001F)
#define PLFOWS(slot)    ((slot->data[0x9] >> 0x8) & 0x0003)
#define PLFOS(slot)     ((slot->data[0x9] >> 0x5) & 0x000E) // Setting this to 14 seems to make FM more precise
#define ALFOWS(slot)    ((slot->data[0x9] >> 0x3) & 0x0003)
#define ALFOS(slot)     ((slot->data[0x9] >> 0x0) & 0x0007) 

#define ISEL(slot)      ((slot->data[0xA] >> 0x3) & 0x000F)
#define IMXL(slot)      ((slot->data[0xA] >> 0x0) & 0x0007)

#define DISDL(slot)     ((slot->data[0xB] >> 0xD) & 0x0007)
#define DIPAN(slot)     ((slot->data[0xB] >> 0x8) & 0x001F)
#define EFSDL(slot)     ((slot->data[0xB] >> 0x5) & 0x0007)
#define EFPAN(slot)     ((slot->data[0xB] >> 0x0) & 0x001F)


//Envelope step (fixed point)
int ARTABLE[64],DRTABLE[64];

//Envelope times in ms
double ARTimes[64]={100000/*infinity*/,100000/*infinity*/,8100.0,6900.0,6000.0,4800.0,4000.0,3400.0,3000.0,2400.0,2000.0,1700.0,1500.0,
					1200.0,1000.0,860.0,760.0,600.0,500.0,430.0,380.0,300.0,250.0,220.0,190.0,150.0,130.0,110.0,95.0,
					76.0,63.0,55.0,47.0,38.0,31.0,27.0,24.0,19.0,15.0,13.0,12.0,9.4,7.9,6.8,6.0,4.7,3.8,3.4,3.0,2.4,
					2.0,1.8,1.6,1.3,1.1,0.93,0.85,0.65,0.53,0.44,0.40,0.35,0.0,0.0};
double DRTimes[64]={100000/*infinity*/,100000/*infinity*/,118200.0,101300.0,88600.0,70900.0,59100.0,50700.0,44300.0,35500.0,29600.0,25300.0,22200.0,17700.0,
					14800.0,12700.0,11100.0,8900.0,7400.0,6300.0,5500.0,4400.0,3700.0,3200.0,2800.0,2200.0,1800.0,1600.0,1400.0,1100.0,
					920.0,790.0,690.0,550.0,460.0,390.0,340.0,270.0,230.0,200.0,170.0,140.0,110.0,98.0,85.0,68.0,57.0,49.0,43.0,34.0,
					28.0,25.0,22.0,18.0,14.0,12.0,11.0,8.5,7.1,6.1,5.4,4.3,3.6,3.1};


typedef enum {ATTACK,DECAY1,DECAY2,RELEASE} _STATE;
struct _EG
{
	int volume;	//
	_STATE state;
	int step;
	//step vals
	int AR;		//Attack
	int D1R;	//Decay1
	int D2R;	//Decay2
	int RR;		//Release

	int DL;		//Decay level
	BYTE EGHOLD;
	BYTE LPLINK;
};

struct _SLOT
{
	union
	{
		WORD data[0x10];	//only 0x1a bytes used
		BYTE datab[0x20];
	};
	BYTE active;	//this slot is currently playing
	BYTE *base;		//samples base address
	DWORD cur_addr;
	DWORD nxt_addr;	//current play address (24.8)
	DWORD step;		//pitch step (24.8)
	BYTE Back;
	_EG EG;			//Envelope
	_LFO PLFO;		//Phase LFO
	_LFO ALFO;		//Amplitude LFO
	int slot;
	signed short Prev;	//Previous sample (for interpolation)
};

#define MEM4B(scsp)		((scsp->data[0]>>0x0)&0x0200)
#define DAC18B(scsp)	((scsp->data[0]>>0x0)&0x0100)
#define MVOL(scsp)		((scsp->data[0]>>0x0)&0x000F)
#define RBL(scsp)		((scsp->data[1]>>0x7)&0x0003)
#define RBP(scsp)		((scsp->data[1]>>0x0)&0x007F)
#define MOFULL(scsp)	((scsp->data[2]>>0x0)&0x1000)
#define MOEMPTY(scsp)	((scsp->data[2]>>0x0)&0x0800)
#define MIOVF(scsp)		((scsp->data[2]>>0x0)&0x0400)
#define MIFULL(scsp)	((scsp->data[2]>>0x0)&0x0200)
#define MIEMPTY(scsp)	((scsp->data[2]>>0x0)&0x0100)

#define SCILV0(scsp)    ((scsp->data[0x24/2]>>0x0)&0xff)
#define SCILV1(scsp)    ((scsp->data[0x26/2]>>0x0)&0xff)
#define SCILV2(scsp)    ((scsp->data[0x28/2]>>0x0)&0xff)

#define SCIEX0	0
#define SCIEX1	1
#define SCIEX2	2
#define SCIMID	3
#define SCIDMA	4
#define SCIIRQ	5
#define SCITMA	6
#define SCITMB	7

bool HasMVOL;

struct _SCSP
{
	union
	{
		WORD data[0x30/2];
		BYTE datab[0x30];
	};
	_SLOT Slots[32];
	signed short RINGBUF[64];
	unsigned char BUFPTR;
#if FM_DELAY
	signed short DELAYBUF[FM_DELAY];
	BYTE DELAYPTR;
#endif
	unsigned char *SCSPRAM;
	UINT32 SCSPRAM_LENGTH;
	char Master;
#ifdef USEDSP
	_SCSPDSP DSP;
	signed short *MIXBuf;
#endif

	int ARTABLE[64], DRTABLE[64];
} SCSPs[MAX_SCSP],*SCSP=SCSPs;

static signed short *RBUFDST;	//this points to where the sample will be stored in the RingBuf


unsigned char DecodeSCI(unsigned char irq)
{
	unsigned char SCI=0;
	unsigned char v;
	v=(SCILV0((SCSP))&(1<<irq))?1:0;
	SCI|=v;
	v=(SCILV1((SCSP))&(1<<irq))?1:0;
	SCI|=v<<1;
	v=(SCILV2((SCSP))&(1<<irq))?1:0;
	SCI|=v<<2;
	return SCI;
}



void CheckPendingIRQ()
{
	DWORD pend=SCSPs->data[0x20/2];
	DWORD en=SCSPs->data[0x1e/2];
	
	/*
	 * MIDI FIFO critical section
	 *
	 * NOTE: I don't think a mutex is really needed here, so I've disabled
	 * this critical section.
	 */
	//if (g_Config.multiThreaded)
	//	MIDILock->Lock();

	if(MidiW!=MidiR)
	{
		//if (g_Config.multiThreaded)
		//	MIDILock->Unlock();
		
		//SCSP.data[0x20/2]|=0x8;	//Hold midi line while there are commands pending

		//Int68kCB(IrqMidi);
		//printf("68K: MIDI IRQ\n");
		//ErrorLogMessage("Midi");
		
		SCSP->data[0x20 / 2] |= 8;
		pend |= 8;
	}
	
	//if (g_Config.multiThreaded)
	//	MIDILock->Unlock();
	
	if(!pend)
		return;
	if(pend&0x40)
		if(en&0x40)
		{
			Int68kCB(IrqTimA);
			//ErrorLogMessage("TimA");
			return;
		}
	if(pend&0x80)
		if(en&0x80)
		{
			Int68kCB(IrqTimBC);
			//ErrorLogMessage("TimB");
			return;
		}
	if(pend&0x100)
		if(en&0x100)
		{
			Int68kCB(IrqTimBC);
			//ErrorLogMessage("TimC");
			return;
		}
	if(pend&0x8)
	if(en&0x8)
	{
		Int68kCB(IrqMidi);
		SCSP->data[0x20 / 2] &= ~8;
		return;
	}

	Int68kCB(0);
}

//void ResetInterrupts() // Can't get this to work correctly in Supermodel.
//{
//	unsigned int reset = SCSP->data[0x22 / 2];
//
//	if (reset & 0x40)
//	{
//		Int68kCB(IrqTimA);
//	}
//	if (reset & 0x180)
//	{
//		Int68kCB(IrqTimBC);
//	}
//	if (reset & 0x8)
//	{
//		Int68kCB(IrqMidi);
//	}
//
//	CheckPendingIRQ();
//}


int Get_AR(int base,int R)
{
	int Rate=base+(R<<1);
//	int Rate=(base+R)<<1;
	if(Rate>63)	Rate=63;
	if(Rate<0) Rate=0;
	return ARTABLE[Rate];
}

int Get_DR(int base,int R)
{
	int Rate=base+(R<<1);
//	int Rate=(base+R)<<1;
	if(Rate>63)	Rate=63;
	if(Rate<0) Rate=0;
	return DRTABLE[Rate];
}


void Compute_EG(_SLOT *slot)
{
	int octave = (OCT(slot) ^ 8) - 8;
	int rate;
	if (KRS(slot) != 0xf)
		rate = octave + 2 * KRS(slot) + ((FNS(slot) >> 9) & 1);
	else
		rate = 0; //rate = ((FNS(slot) >> 9) & 1);

	slot->EG.volume = 0x17F << EG_SHIFT;
	slot->EG.AR = Get_AR(rate, AR(slot));
	slot->EG.D1R = Get_DR(rate, D1R(slot));
	slot->EG.D2R = Get_DR(rate, D2R(slot));
	slot->EG.RR = Get_DR(rate, RR(slot));
	slot->EG.DL = 0x1f - DL(slot);
	slot->EG.EGHOLD = EGHOLD(slot);
}

void SCSP_StopSlot(_SLOT *slot,int keyoff);

int EG_Update(_SLOT *slot)
{
	switch (slot->EG.state)
	{
	case ATTACK:
		slot->EG.volume += slot->EG.AR;
		if (slot->EG.volume >= (0x3ff << EG_SHIFT))
		{
			if (!LPSLNK(slot))
			{
				slot->EG.state = DECAY1;
				if (slot->EG.D1R >= (1024 << EG_SHIFT)) //Skip SCSP_DECAY1, go directly to SCSP_DECAY2
					slot->EG.state = DECAY2;
			}
			slot->EG.volume = 0x3ff << EG_SHIFT;
		}
		if (slot->EG.EGHOLD)
			return 0x3ff << (SHIFT - 10);
		break;
	case DECAY1:
		slot->EG.volume -= slot->EG.D1R;
		if (slot->EG.volume <= 0)
			slot->EG.volume = 0;
		if (slot->EG.volume >> (EG_SHIFT + 5) <= slot->EG.DL)
			slot->EG.state = DECAY2;
		break;
	case DECAY2:
		if (D2R(slot) == 0)
			return (slot->EG.volume >> EG_SHIFT) << (SHIFT - 10);
		slot->EG.volume -= slot->EG.D2R;
		if (slot->EG.volume <= 0)
			slot->EG.volume = 0;

		break;
	case RELEASE:
		slot->EG.volume -= slot->EG.RR;
		if (slot->EG.volume <= 0)
		{
			slot->EG.volume = 0;
			SCSP_StopSlot(slot, 0);
			//slot->EG.volume = 0x17F << EG_SHIFT;
			//slot->EG.state = SCSP_ATTACK;
		}
		break;
	default:
		return 1 << SHIFT;
	}
	return (slot->EG.volume >> EG_SHIFT) << (SHIFT - 10);
}


DWORD SCSP_Step(_SLOT *slot)
{
	//int octave=OCT(slot);
	//UINT64 Fn;
	//Fn=(FNS_Table[FNS(slot)]);	//24.8
	//if(octave&8)
	//	Fn>>=(16-octave);
	//else
	//	Fn<<=octave;


	//return Fn/srate;
	int octave = (OCT(slot) ^ 8) - 8 + SHIFT - 10;
	UINT32 Fn = FNS(slot) + (1 << 10);
	if (octave >= 0)
	{
		Fn <<= octave;
	}
	else
	{
		Fn >>= -octave;
	}

	return Fn;
}

void Compute_LFO(_SLOT *slot)
{
	if(PLFOS(slot)!=0)
		LFO_ComputeStep(&(slot->PLFO),LFOF(slot),PLFOWS(slot),PLFOS(slot),0);
	if(ALFOS(slot)!=0)
		LFO_ComputeStep(&(slot->ALFO),LFOF(slot),ALFOWS(slot),ALFOS(slot),1);
}


void SCSP_StartSlot(_SLOT *slot)
{
	UINT32 start_offset;

	slot->active = 1;
	slot->Back = 0;
	slot->nxt_addr = 1 << SHIFT;
	slot->cur_addr = 0;
	start_offset = PCM8B(slot) ? SA(slot) : SA(slot) & 0x7FFFE;
	slot->step = SCSP_Step(slot);
	slot->base = SCSP->SCSPRAM + start_offset;
	Compute_EG(slot);
	slot->EG.state = ATTACK;
	slot->EG.volume = 0x17F << EG_SHIFT;
	slot->Prev = 0;
	Compute_LFO(slot);
	/*{
		char aux[12];
		static n=0;
		sprintf(aux,"smp%d.raw",n);
		FILE *f=fopen(aux,"wb");
		fwrite(slot->base,LEA(slot),1,f);
		fclose(f);
		++n;
	}
	*/

}

void SCSP_StopSlot(_SLOT *slot,int keyoff)
{
	if(keyoff)
	{
		slot->EG.state=RELEASE;
//		return;
	}
	else
		slot->active=0;
	slot->data[0]&=~0x800;
	//DebugLog("KEYOFF2 %d",slot->slot);
}

#define log2(n) (log((float) n)/log((float) 2))

bool SCSP_Init(const Util::Config::Node &config, int n)
{
	s_config = &config;
	s_multiThreaded = config["MultiThreaded"].ValueAs<bool>();
	legacySound = config["LegacySoundDSP"].ValueAs<bool>();
	SoundClock = Freq;

	if(n==2)
	{
		SCSP=SCSPs+1;
		memset(SCSP,0,sizeof(_SCSP));
		SCSP->Master=0;
		HasSlaveSCSP=1;
#ifdef USEDSP
		SCSPDSP_Init(&SCSP->DSP);
#endif

	}
	SCSP=SCSPs+0;
	memset(SCSP,0,sizeof(_SCSP));
#ifdef USEDSP
	SCSPDSP_Init(&SCSP->DSP);
#endif
	SCSP->Master=1;
	SCSP->SCSPRAM_LENGTH = 512 * 1024;
	SCSP->DSP.SCSPRAM = (UINT16 *)SCSP->SCSPRAM;
	SCSP->DSP.SCSPRAM_LENGTH = (512 * 1024) / 2;
	MidiR=MidiW=0;
	MidiOutR=MidiOutW=0;
	MidiOutFill=0;
	MidiInFill=0;
	

	for(int i=0;i<0x400;++i)
	{
		float fcent=(double) 1200.0*log2((double)(((double) 1024.0+(double)i)/(double)1024.0));
		//float fcent=1.0+(float) i/1024.0;
		fcent=(double) 44100.0*pow(2.0,fcent/1200.0);
		FNS_Table[i]=(float) (1<<SHIFT) *fcent;
		//FNS_Table[i]=(i>>(10-SHIFT))|(1<<SHIFT);
		
	}
	for (int i = 0; i < 0x400; ++i) {
		float envDB = ((float)(3 * (i - 0x3ff))) / 32.0;
		float scale = (float)(1 << SHIFT);
		EG_TABLE[i] = (INT32)(pow(10.0, envDB / 20.0)*scale);
	}

#ifdef RB_VOLUME
	// Volume table, 1 = -0.375dB, 8 = -3dB, 256 = -96dB
	for (i = 0; i < 256; i++)
		volume[i] = 65536.0*pow(2.0, (-0.375 / 6.0)*i);
	for (i = 256; i < 256 * 4; i++)
		volume[i] = 0;

	// Pan values, units are a linear -3dB ramp, i.e. 8 places in the volume[] table.
	for (i = 0; i < 16; i++)
	{
		pan_left[i] = i * 8;
		pan_left[i + 16] = 0;
		pan_right[i] = 0;
		pan_right[i + 16] = i * 8;
	}
	// patch in the infinity values
	pan_left[15] = 256;
	pan_right[31] = 256;

#else

	for(int i=0;i<0x10000;++i)
	{
		int iTL =(i>>0x0)&0xff;
		int iPAN=(i>>0x8)&0x1f;
		int iSDL=(i>>0xd)&0x07;

		float TL=1.0;
		float SegaDB=0;
		if(iTL&0x01) SegaDB-=0.4;
		if(iTL&0x02) SegaDB-=0.8;
		if(iTL&0x04) SegaDB-=1.5;
		if(iTL&0x08) SegaDB-=3;
		if(iTL&0x10) SegaDB-=6;
		if(iTL&0x20) SegaDB-=12;
		if(iTL&0x40) SegaDB-=24;
		if(iTL&0x80) SegaDB-=48;

		TL=pow(10.0,SegaDB/20.0);

		float PAN=1.0;

		SegaDB=0;
		if(iPAN&0x1) SegaDB-=3;
		if(iPAN&0x2) SegaDB-=6;
		if(iPAN&0x4) SegaDB-=12;
		if(iPAN&0x8) SegaDB-=24;

		if(iPAN==0xf) PAN=0.0;
		else if(iPAN==0x1f) PAN=0.0;
		else PAN=pow(10.0,SegaDB/20.0);

		float LPAN,RPAN;

		if(iPAN<0x10)
		{
			LPAN=PAN;
			RPAN=1.0;
		}
		else
		{
			RPAN=PAN;
			LPAN=1.0;
		}

		float SDL=1.0;
		if(iSDL)
			SDL=pow(10.0,(SDLT[iSDL])/20.0);
		else
			SDL=0.0;

		if(iSDL==0x6)
			int a=1;
		if(iTL==0x3a)
			int a=1;
		
		LPANTABLE[i]=FIX((4.0*LPAN*TL*SDL));
		RPANTABLE[i]=FIX((4.0*RPAN*TL*SDL));
	}
#endif
	ARTABLE[0]=DRTABLE[0]=0;	//Infinite time
	ARTABLE[1]=DRTABLE[1]=0;
	for(int i=2;i<64;++i)
	{
		double t,step,scale;
		t=ARTimes[i];	//In ms
		if(t!=0.0)
		{
			step=(1023*1000.0)/((float) srate*t);
			scale=(double) (1<<EG_SHIFT);
			ARTABLE[i]=(int) (step*scale);
		}
		else
			ARTABLE[i]=1024<<EG_SHIFT;

		t=DRTimes[i];	//In ms
		step=(1023*1000.0)/((float) srate*t);
		scale=(double) (1<<EG_SHIFT);
		DRTABLE[i]=(int) (step*scale);
	}
	
	for(int i=0;i<32;++i)
		SCSPs[0].Slots[i].slot=i;

#ifdef USEDSP
	//allocate 0x300 (over 1 frame) * 32 slots * 16 bit
	SCSP->MIXBuf=(signed short *) malloc(0x300*32*sizeof(signed short));
#endif

	LFO_Init();
	buffertmpl = NULL;
	buffertmpr = NULL;
	buffertmpl=(signed int*) malloc(44100*sizeof(signed int));
	if (NULL == buffertmpl)
		return ErrorLog("Insufficient memory for internal SCSP buffers.");
	buffertmpr=(signed int*) malloc(44100*sizeof(signed int));
	if (NULL == buffertmpl)
	{
		free(buffertmpl);
		return ErrorLog("Insufficient memory for internal SCSP buffers.");
	}
	memset(buffertmpl,0,44100*sizeof(signed int));
	memset(buffertmpr,0,44100*sizeof(signed int));
	SCSPs->data[0x20 / 2] = 0;
	TimCnt[0] = 0xffff;
	TimCnt[1] = 0xffff;
	TimCnt[2] = 0xffff;
	
	// MIDI FIFO mutex
	MIDILock = CThread::CreateMutex();
	if (NULL == MIDILock)
	{
		free(buffertmpl);
		free(buffertmpr);
		return ErrorLog("Unable to create MIDI mutex!");
	}
	
	return OKAY;
}

void SCSP_SetRAM(int n,unsigned char *r)
{
	SCSPs[n].SCSPRAM=r;
#ifdef USEDSP
	SCSPs[n].DSP.SCSPRAM=(unsigned short*) r;
#endif
}

void SCSP_UpdateSlotReg(int s,int r)
{
	struct _SLOT *slot = SCSP->Slots + s;
	int sl;
	switch (r & 0x3f)
	{
	case 0:
	case 1:
		if (KEYONEX(slot))
		{
			for (sl = 0; sl < 32; ++sl)
			{
				struct _SLOT *s2 = SCSP->Slots + sl;
				{
					if (KEYONB(s2) && s2->EG.state == RELEASE/*&& !s2->active*/)
					{
						SCSP_StartSlot(s2);
					}
					if (!KEYONB(s2) /*&& s2->active*/)
					{
						SCSP_StopSlot(s2, 1);
					}
				}
			}
			slot->data[0] &= ~0x1000;
		}
		break;
	case 0x10:
	case 0x11:
		slot->step = SCSP_Step(slot);
		break;
	case 0xA:
	case 0xB:
		slot->EG.RR = Get_DR(0, RR(slot));
		slot->EG.DL = 0x1f - DL(slot);
		break;
	case 0x12:
	case 0x13:
		Compute_LFO(slot);
		break;
	}
}

void SCSP_UpdateReg(int reg)
{
	switch(reg&0x3f)
	{
		case 0x0: // Need to get this working in Supermodel as well
			//m_stream->set_output_gain(0, MVOL() / 15.0);
			//m_stream->set_output_gain(1, MVOL() / 15.0);
			//break;
		case 0x2:
		case 0x3:
		{
#ifdef USEDSP
			{
				SCSP->DSP.RBL = (8 * 1024) << RBL(SCSP); // 8 / 16 / 32 / 64 kwords
				SCSP->DSP.RBP = RBP(SCSP);
			}
#endif
		}
		break;

		case 0x6:
		case 0x7:
			SCSP_MidiOutW(SCSP->data[0x6/2]&0xff);
			break;

		case 8:
		case 9:
			SCSP->data[0x8 / 2] &= 0xf800; 
			break;
		case 0x12:
		case 0x13:
		case 0x14:
		case 0x15:
		case 0x16:
		case 0x17:
			{
				int a=1;
			}
			break;
		case 0x18:
		case 0x19:
			if(SCSP->Master)	
			{
				TimPris[0]=1<<((SCSPs->data[0x18/2]>>8)&0x7);
				TimCnt[0]=((SCSPs->data[0x18/2]&0xfe)<<8)/*|(TimCnt[0]&0xff)*/;
			}
			break;
		case 0x1a:
		case 0x1b:
			if(SCSP->Master)	
			{
				TimPris[1]=1<<((SCSPs->data[0x1A/2]>>8)&0x7);
				TimCnt[1]=((SCSPs->data[0x1A/2]&0xfe)<<8)/*|(TimCnt[1]&0xff)*/;
			}
			break;
		case 0x1C:
		case 0x1D:
			if(SCSP->Master)	
			{
				TimPris[2]=1<<((SCSPs->data[0x1C/2]>>8)&0x7);
				TimCnt[2]=((SCSPs->data[0x1C/2]&0xfe)<<8)/*|(TimCnt[2]&0xff)*/;
			}
			break;
		case 0x22:	//SCIRE
		case 0x23:
			if(SCSP->Master)	
			{
				SCSP->data[0x20 / 2] &= ~SCSP->data[0x22 / 2];
				//ResetInterrupts();


				if (TimCnt[0] == 0xffff)
				{
					SCSP->data[0x20 / 2] |= 0x40;
				}
				if (TimCnt[1] == 0xffff)
				{
					SCSP->data[0x20 / 2] |= 0x80;
				}
				if (TimCnt[2] == 0xffff)
				{
					SCSP->data[0x20 / 2] |= 0x100;
				}
			}
			break;
		case 0x24:
		case 0x25:
		case 0x26:
		case 0x27:
		case 0x28:
		case 0x29:
			if(SCSP->Master)
			{
				IrqTimA=DecodeSCI(SCITMA);
				IrqTimBC=DecodeSCI(SCITMB);
				IrqMidi=DecodeSCI(SCIMID);
			}
			break;
		case 0x2b:
			MCIEB = SCSP->data[0x2a / 2];
			break;
		case 0x2c:
		case 0x2d:
			break;
		case 0x2e:
		case 0x2f:
			MCIPD &= ~SCSP->data[0x2e / 2];
			break;
	}
}

void SCSP_UpdateSlotRegR(int slot,int reg)
{

}

void SCSP_UpdateRegR(int reg)
{
	switch (reg & 0x3f)
	{
	case 4:
	case 5:
	{
		unsigned short v = SCSP->data[0x4 / 2];
		v &= 0xff00;

		/*
		 * MIDI FIFO critical section!
		 */
		if (s_multiThreaded)
			MIDILock->Lock();

		v |= MidiStack[MidiR];
		//printf("read MIDI\n");
		if (MidiR != MidiW)
		{
			++MidiR;
			MidiR &= MIDI_STACK_SIZE_MASK;
			//Int68kCB(IrqMidi);
		}

		MidiInFill--;
		SCSP->data[0x4 / 2] = v;

		if (s_multiThreaded)
			MIDILock->Unlock();
	}
	break;
	case 8:
	case 9:
	{
		// MSLC     |  CA   |SGC|EG
		// f e d c b a 9 8 7 6 5 4 3 2 1 0
		BYTE MSLC = (SCSP->data[0x8 / 2] >> 11) & 0x1f;
		_SLOT *slot = SCSP->Slots + MSLC;
		unsigned int SGC = (slot->EG.state) & 3;
		unsigned int CA = (slot->cur_addr >> (SHIFT + 12)) & 0xf;
		unsigned int EG = (0x1f - (slot->EG.volume >> (EG_SHIFT + 5))) & 0x1f;
		/* note: according to the manual MSLC is write only, CA, SGC and EG read only.  */
		SCSP->data[0x8 / 2] =  /*(MSLC << 11) |*/ (CA << 7) | (SGC << 5) | EG;
	}
	break;
	case 0x18:
	case 0x19:
		break;

	case 0x1a:
	case 0x1b:
		break;

	case 0x1c:
	case 0x1d:
		break;

	case 0x2a:
	case 0x2b:
		SCSP->data[0x2a / 2] = MCIEB;
		break;

	case 0x2c:
	case 0x2d:
		SCSP->data[0x2c / 2] = MCIPD;
		break;
	}
}


void SCSP_w8(unsigned int addr,unsigned char val)
{
	addr&=0xffff;
	if(addr<0x400)
	{
		int slot=addr/0x20;
		addr&=0x1f;
		//DebugLog("Slot %02X Reg %02X write byte %04X\n",slot,addr^1,val);
		//printf("\tSlot %02X Reg %02X write byte %04X\n",slot,addr^1,val);
		*(unsigned char *) &(SCSP->Slots[slot].datab[addr^1]) = val;
		SCSP_UpdateSlotReg(slot,(addr^1)&0x1f);
	}
	else if(addr<0x600)
	{
		*(unsigned char *) &(SCSP->datab[(addr&0xff)^1]) = val;
		SCSP_UpdateReg((addr^1)&0xff);
	}	
	else if(addr<0x700)
		SCSP->RINGBUF[(addr-0x600)/2]=val;
	else
	{
		if (legacySound == true) {
#ifdef USEDSP
			//DSP
			if (addr < 0x780)	//COEF
				((unsigned char *)SCSP->DSP.COEF)[(addr - 0x700) ^ 1] = val;
			else if (addr < 0x7C0)
				((unsigned char *)SCSP->DSP.MADRS)[(addr - 0x780) ^ 1] = val;
			else if (addr >= 0x800 && addr < 0xC00)
				((unsigned char *)SCSP->DSP.MPRO)[(addr - 0x800) ^ 1] = val;
			else
				int a = 1;
			if (addr == 0xBF0)
			{
				SCSPDSP_Start(&SCSP->DSP);
			}
			int a = 1;
#endif
		}
		else {
#ifdef USEDSP
			//DSP
			if (addr < 0x780)	//COEF
				((unsigned char *)SCSP->DSP.COEF)[(addr - 0x700) ^ 1] = val;
			else if (addr < 0x7C0)
				((unsigned char *)SCSP->DSP.MADRS)[(addr - 0x780) ^ 1] = val;
			else if (addr < 0x800)
				((unsigned char *)SCSP->DSP.MADRS)[(addr - 0x7c0) ^ 1] = val;
			else if (addr < 0xC00)
				((unsigned char *)SCSP->DSP.MPRO)[(addr - 0x800) ^ 1] = val;
			else
				int a = 1;
			if (addr == 0xBF0)
			{
				SCSPDSP_Start(&SCSP->DSP);
			}
			int a = 1;
#endif
		}
	}
}

void SCSP_w16(unsigned int addr,unsigned short val)
{
	addr&=0xffff;
	if(addr<0x400)
	{
		int slot=addr/0x20;
		addr&=0x1f;
		//DebugLog("Slot %02X Reg %02X write word %04X\n",slot,addr,val);
		//printf("\tSlot %02X Reg %02X write word %04X\n",slot,addr,val);
		*(unsigned short *) &(SCSP->Slots[slot].datab[addr]) = val;
		SCSP_UpdateSlotReg(slot,addr&0x1f);
	}
	else if(addr<0x600)
	{
		/**(unsigned short *) &(SCSP->datab[addr&0xff]) = val;
		SCSP_UpdateReg(addr&0xff);*/
		if (addr < 0x430)
		{
			*((unsigned short *)(SCSP->datab + ((addr & 0x3f)))) = val;
			SCSP_UpdateReg(addr & 0x3f);
		}
	}	
	else if (addr < 0x700)
		SCSP->RINGBUF[(addr - 0x600) / 2] = val;
	else
	{
		if (legacySound == true) {
#ifdef USEDSP
			// ElSemi's legacy DSP. For now we will need this for Fighting Vipers 2.
			if (addr < 0x780)	//COEF
				*(unsigned short *) &(SCSP->DSP.COEF[(addr - 0x700) / 2]) = val;
			else if (addr < 0x800)
				*(unsigned short *) &(SCSP->DSP.MADRS[(addr - 0x780) / 2]) = val;
			else if (addr < 0xC00)
				*(unsigned short *) &(SCSP->DSP.MPRO[(addr - 0x800) / 2]) = val;
			else
				int a = 1;
			if (addr == 0xBF0)
				SCSPDSP_Start(&SCSP->DSP);
			int a = 1;
#endif
		}
		else {
#ifdef USEDSP
			// MAME DSP
			if (addr < 0x780)  //COEF
				*((UINT16 *)(SCSP->DSP.COEF + (addr - 0x700) / 2)) = val;
			else if (addr < 0x7c0)
				*((UINT16 *)(SCSP->DSP.MADRS + (addr - 0x780) / 2)) = val;
			else if (addr < 0x800) // MADRS is mirrored twice
				*((UINT16 *)(SCSP->DSP.MADRS + (addr - 0x7c0) / 2)) = val;
			else if (addr < 0xC00)
			{
				*((UINT16 *)(SCSP->DSP.MPRO + (addr - 0x800) / 2)) = val;
			}
			else
				int a = 1;
			if (addr == 0xBF0)
				SCSPDSP_Start(&SCSP->DSP);
			int a = 1;
#endif
		}
	}
}

void SCSP_w32(unsigned int addr,unsigned int val)
{
	addr&=0xffff;
	if(addr<0x400)
	{
		int slot=addr/0x20;
		addr&=0x1f;
		//DebugLog("Slot %02X Reg %02X write dword %08X\n",slot,addr,val);
		//printf("\tSlot %02X Reg %02X write dword %08X\n",slot,addr,val);
		rotl(val, 16);

		*(unsigned int *) &(SCSP->Slots[slot].datab[addr]) = val;
		SCSP_UpdateSlotReg(slot,addr&0x1f);
		SCSP_UpdateSlotReg(slot,(addr&0x1f)+2);
	}
	else if(addr<0x600)
	{
		rotl(val, 16);

		*(unsigned int *) &(SCSP->datab[addr&0xff]) = val;
		SCSP_UpdateReg(addr&0xff);
		SCSP_UpdateReg((addr&0xff)+2);
	}	
	else if(addr<0x700)
		int a=1;
	else
	{
#ifdef USEDSP
		//DSP
		rotl(val, 16);
			if(addr<0x780)	//COEF
				*(unsigned int *) &(SCSP->DSP.COEF[(addr-0x700)/2])=val;
			else if (addr < 0x7c0)
				*(unsigned int *) &(SCSP->DSP.MADRS[(addr-0x780)/2]) = val;
			else if (addr < 0x800) // MADRS is mirrored twice
				*(unsigned int *) &(SCSP->DSP.MADRS[(addr-0x7c0)/2]) = val;
			else if(addr<0xC00)
				*(unsigned int *) &(SCSP->DSP.MPRO[(addr-0x800)/2])=val;
			else
				int a=1;
			if(addr==0xBF0)
				SCSPDSP_Start(&SCSP->DSP);
			int a=1;
#endif
	}
}

unsigned char SCSP_r8(unsigned int addr)
{
	unsigned char v=0;
	addr&=0xffff;
	if(addr<0x400)
	{
		int slot=addr/0x20;
		addr&=0x1f;
		SCSP_UpdateSlotRegR(slot,(addr^1)&0x1f);
		
		v=*(unsigned char *) &(SCSP->Slots[slot].datab[addr^1]);
		//DebugLog("Slot %02X Reg %02X Read byte %02X",slot,addr^1,v);
	}
	else if(addr<0x600)
	{
		SCSP_UpdateRegR(addr&0xff);
		v= *(unsigned char *) &(SCSP->datab[(addr&0xff)^1]);
		//ErrorLogMessage("SCSP Reg %02X Read byte %02X",addr&0xff,v);		
	}	
	else if(addr<0x700)
		v=0;
	return v;
}

unsigned short SCSP_r16(unsigned int addr)
{
	unsigned short v=0;
	addr&=0xffff;
	if(addr<0x400)
	{
		int slot=addr/0x20;
		addr&=0x1f;
		SCSP_UpdateSlotRegR(slot,addr&0x1f);
		v=*(unsigned short *) &(SCSP->Slots[slot].datab[addr]);
		//DebugLog("Slot %02X Reg %02X Read word %04X",slot,addr,v);
	}
	else if(addr<0x600)
	{
		//SCSP_UpdateRegR(addr&0xff);
		//v= *(unsigned short *) &(SCSP->datab[addr&0xff]);
		////ErrorLogMessage("SCSP Reg %02X Read word %04X",addr&0xff,v);
		if (addr < 0x430)
		{
			SCSP_UpdateRegR(addr & 0x3f);
			v = *((UINT16 *)(SCSP->datab + ((addr & 0x3f))));
		}
	}	
	else if (addr < 0x700)
		v = SCSP->RINGBUF[(addr - 0x600) / 2];
	else
	{
		// DSP stuff
		if (addr < 0x780)	//COEF
			v = *((UINT16 *)(SCSP->DSP.COEF + (addr - 0x700) / 2));
		else if (addr < 0x7c0)
			v = *((UINT16 *)(SCSP->DSP.MADRS + (addr - 0x780) / 2));
		else if (addr < 0x800)
			v = *((UINT16 *)(SCSP->DSP.MADRS + (addr - 0x7c0) / 2));
		else if (addr < 0xC00)
			v = *((UINT16 *)(SCSP->DSP.MPRO + (addr - 0x800) / 2));
		else if (addr < 0xE00)
		{
			if (addr & 2)
				v = SCSP->DSP.TEMP[(addr >> 2) & 0x7f] & 0xffff;
			else
				v = SCSP->DSP.TEMP[(addr >> 2) & 0x7f] >> 16;
		}
		else if (addr < 0xE80)
		{
			if (addr & 2)
				v = SCSP->DSP.MEMS[(addr >> 2) & 0x1f] & 0xffff;
			else
				v = SCSP->DSP.MEMS[(addr >> 2) & 0x1f] >> 16;
		}
		else if (addr < 0xEC0)
		{
			if (addr & 2)
				v = SCSP->DSP.MIXS[(addr >> 2) & 0xf] & 0xffff;
			else
				v = SCSP->DSP.MIXS[(addr >> 2) & 0xf] >> 16;
		}
		else if (addr < 0xEE0)
			v = *((UINT16 *)(SCSP->DSP.EFREG + (addr - 0xec0) / 2));
		else
		{
			if (addr < 0xEE4)
				v = *((UINT16 *)(SCSP->DSP.EXTS + (addr - 0xee0) / 2));
		}
	}
	return v;
}

unsigned int SCSP_r32(unsigned int addr)
{
	return 0xffffffff;
}

#define REVSIGN(v) ((~v)+1)

void SCSP_TimersAddTicks(int ticks)
{
	if (TimCnt[0] <= 0xff00)
	{
		TimCnt[0] += ticks << (8 - ((SCSPs->data[0x18 / 2] >> 8) & 0x7));
		if (TimCnt[0] > 0xFF00)
		{
			TimCnt[0] = 0xFFFF;
			SCSPs->data[0x20 / 2] |= 0x40;
		}
		SCSPs->data[0x18 / 2] &= 0xff00;
		SCSPs->data[0x18 / 2] |= TimCnt[0] >> 8;
	}

	if (TimCnt[1] <= 0xff00)
	{
		TimCnt[1] += ticks << (8 - ((SCSPs->data[0x1a / 2] >> 8) & 0x7));
		if (TimCnt[1] > 0xFF00)
		{
			TimCnt[1] = 0xFFFF;
			SCSPs->data[0x20 / 2] |= 0x80;
		}
		SCSPs->data[0x1a / 2] &= 0xff00;
		SCSPs->data[0x1a / 2] |= TimCnt[1] >> 8;
	}

	if (TimCnt[2] <= 0xff00)
	{
		TimCnt[2] += ticks << (8 - ((SCSPs->data[0x1c / 2] >> 8) & 0x7));
		if (TimCnt[2] > 0xFF00)
		{
			TimCnt[2] = 0xFFFF;
			SCSPs->data[0x20 / 2] |= 0x100;
		}
		SCSPs->data[0x1c / 2] &= 0xff00;
		SCSPs->data[0x1c / 2] |= TimCnt[2] >> 8;
	}
}


signed int inline SCSP_UpdateSlot(_SLOT *slot)
{
	signed int sample;
	int step = slot->step;
	DWORD addr1, addr2, addr_select;
	DWORD *addr[2] = { &addr1, &addr2 };
	DWORD *slot_addr[2] = { &(slot->cur_addr), &(slot->nxt_addr) };


	if (SSCTL(slot) != 0)
		return 0;

	if (PLFOS(slot) != 0)
	{
		step = step * PLFO_Step(&(slot->PLFO));
		step >>= (SHIFT);
	}

	if (PCM8B(slot)) {
		addr1 = slot->cur_addr >> SHIFT;
		addr2 = slot->nxt_addr >> SHIFT;
	}
	else {
		//addr=(slot->cur_addr>>(SHIFT-1))&(~1);
		addr1 = (slot->cur_addr >> (SHIFT - 1)) & 0x7fffe;
		addr2 = (slot->nxt_addr >> (SHIFT - 1)) & 0x7fffe;
	}

	if (MDL(slot) != 0 || MDXSL(slot) != 0 || MDYSL(slot) != 0)
	{
		signed int smp = (SCSPs->RINGBUF[(SCSPs->BUFPTR + MDXSL(slot)) & 63] + SCSPs->RINGBUF[(SCSPs->BUFPTR + MDYSL(slot)) & 63]) / 2;
		smp <<= 0xA; // associate cycle with 1024
		// Here down below, a sample range of 24 is needed for VF3 to sound correct.
		smp >>= 0x18 - MDL(slot); // ex. for MDL=0xF, sample range corresponds to +/- 64 pi (32=2^5 cycles) so shift by 11 (16-5 == 0x1A-0xF)
		if (!PCM8B(slot)) smp <<= 1;
		addr1 += smp; addr2 += smp;
		if (!PCM8B(slot))
		{
			addr1 &= 0x7fffe; addr2 &= 0x7fffe;
		}
		else
		{
			addr1 &= 0x7ffff; addr2 &= 0x7ffff;
		}
	}
	//if (SSCTL(slot) == 0) {
		if (PCM8B(slot))	//8 bit signed
		{
			signed char *p1 = (signed char *) &(slot->base[addr1 ^ 1]);
			signed char *p2 = (signed char *) &(slot->base[addr2 ^ 1]);
			int s;
			signed int fpart = slot->cur_addr&((1 << SHIFT) - 1);
			//sample=(p[0])<<8;
			s = (int)(p1[0] << 8)*((1 << SHIFT) - fpart) + (int)(p2[0] << 8)*fpart;
			sample = (s >> SHIFT);
		}
		else	//16 bit signed (endianness?)
		{
			signed short *p1 = (signed short *) &(slot->base[addr1]);
			signed short *p2 = (signed short *) &(slot->base[addr2]);
			int s;
			signed int fpart = slot->cur_addr&((1 << SHIFT) - 1);
			//sample=(p[0]);
			s = (int)(p1[0])*((1 << (SHIFT)) - fpart) + (int)(p2[0])*fpart;
			
			
			sample = (s >> (SHIFT));

			//sample=((p[0]>>8)&0xFF)|(p[0]<<8);
			//s=(int) p[0]*((1<<SHIFT)-fpart)+(int) p[1]*fpart;
			//sample=s>>SHIFT;

			/*		if(SBCTL(slot)&1)	//reverse data
			sample^=0x7fff;
			if(SBCTL(slot)&2)	//reverse sign
			sample^=0x8000;
			*/
		}
	//}

	if (SBCTL(slot) & 0x1)
		sample ^= 0x7FFF;
	if (SBCTL(slot) & 0x2)
		sample = (INT16)(sample ^ 0x8000);

	if (slot->Back)
		slot->cur_addr -= step;
	else
		slot->cur_addr += step;
	slot->nxt_addr = slot->cur_addr + (1 << SHIFT);

	addr1 = slot->cur_addr >> SHIFT;
	addr2 = slot->nxt_addr >> SHIFT;

	if (addr1 >= LSA(slot) && !(slot->Back))
	{
		if (LPSLNK(slot) && slot->EG.state == ATTACK)
			slot->EG.state = DECAY1;
	}


	for (addr_select = 0; addr_select < 2; addr_select++)
	{
		INT32 rem_addr;
		switch (LPCTL(slot))
		{
		case 0: //no loop
			if (*addr[addr_select] >= LSA(slot) && *addr[addr_select] >= LEA(slot))
			{
				//slot->active=0;
				SCSP_StopSlot(slot, 0);
			}
			break;
		case 1: //normal loop
			if (*addr[addr_select] >= LEA(slot))
			{
				rem_addr = *slot_addr[addr_select] - (LEA(slot) << SHIFT);
				*slot_addr[addr_select] = (LSA(slot) << SHIFT) + rem_addr;
			}
			break;
		case 2: //reverse loop
			if ((*addr[addr_select] >= LSA(slot)) && !(slot->Back))
			{
				rem_addr = *slot_addr[addr_select] - (LSA(slot) << SHIFT);
				*slot_addr[addr_select] = (LEA(slot) << SHIFT) - rem_addr;
				slot->Back = 1;
			}
			else if ((*addr[addr_select] < LSA(slot) || (*slot_addr[addr_select] & 0x80000000)) && slot->Back)
			{
				rem_addr = (LSA(slot) << SHIFT) - *slot_addr[addr_select];
				*slot_addr[addr_select] = (LEA(slot) << SHIFT) - rem_addr;
			}
			break;
		case 3: //ping-pong
			if (*addr[addr_select] >= LEA(slot)) //reached end, reverse till start
			{
				rem_addr = *slot_addr[addr_select] - (LEA(slot) << SHIFT);
				*slot_addr[addr_select] = (LEA(slot) << SHIFT) - rem_addr;
				slot->Back = 1;
			}
			else if ((*addr[addr_select] < LSA(slot) || (*slot_addr[addr_select] & 0x80000000)) && slot->Back)//reached start or negative
			{
				rem_addr = (LSA(slot) << SHIFT) - *slot_addr[addr_select];
				*slot_addr[addr_select] = (LSA(slot) << SHIFT) + rem_addr;
				slot->Back = 0;
			}
			break;
		}
	}

	if (!SDIR(slot))
	{
		if (ALFOS(slot) != 0) 
		{
			sample = sample * ALFO_Step(&(slot->ALFO));
			sample >>= (SHIFT);
		}



		if (slot->EG.state == ATTACK)
			sample = (sample * EG_Update(slot)) >> SHIFT;
		else
			sample = (sample * EG_TABLE[EG_Update(slot) >> (SHIFT - 10)]) >> SHIFT;
	}

	if (!STWINH(slot))
	{
		if (!SDIR(slot))
		{
			UINT16 Enc = ((TL(slot)) << 0x0) | (0x7 << 0xd);
			*RBUFDST = (sample * LPANTABLE[Enc]) >> (SHIFT + 1);
		}
	}


	return sample;
}


void SCSP_CpuRunScanline()
{

}

void SCSP_DoMasterSamples(int nsamples)
{
	int slice = 12000000 / (SoundClock*nsamples);	// 68K cycles/sample
	static int lastdiff = 0;

	/*
	 * Compute relative master/slave SCSP balance (note: master is often used
	 * for the front speakers). Equal balance is a 1.0 scale factor for both.
	 * When one SCSP is fully attenuated, the other's samples will be multiplied
	 * by 2.
	 */
	float balance = (float)s_config->Get("Balance").ValueAs<float>();
	if (balance < -100.0f)
		balance = -100.0f;
	else if (balance > 100.0f)
		balance = 100.0f;
	balance /= 100.0f;
	float masterBalance = 1.0f + balance;
	float slaveBalance = 1.0f - balance;
	signed short *bufl, *bufr;

	INT32 sl, s, i;

	bufl = bufferl;
	bufr = bufferr;

	/*
	 * Generate samples
	 */
	for (s = 0; s < nsamples; ++s)
	{
		signed int smpl = 0, smpr = 0;

		for (sl = 0; sl < 32; ++sl)
		{
#if FM_DELAY
			RBUFDST = SCSPs[0].DELAYBUF + SCSPs[0].DELAYPTR;
#else
			RBUFDST = SCSPs[0].RINGBUF + SCSPs[0].BUFPTR;
#endif
			if (SCSPs[0].Slots[sl].active)
			{
				_SLOT *slot = SCSPs[0].Slots + sl;
				UINT16 Enc;

				signed int sample = (int)(masterBalance*(float)SCSP_UpdateSlot(slot));



				Enc = ((TL(slot)) << 0x0) | ((IMXL(slot)) << 0xd);
				SCSPDSP_SetSample(&SCSPs[0].DSP, (sample*LPANTABLE[Enc]) >> (SHIFT - 2), ISEL(slot), IMXL(slot));
				Enc = ((TL(slot)) << 0x0) | ((DIPAN(slot)) << 0x8) | ((DISDL(slot)) << 0xd);
#ifdef RB_VOLUME
				smpl += (sample * volume[TL(slot) + pan_left[DIPAN(slot)]]) >> 17;
				smpr += (sample * volume[TL(slot) + pan_right[DIPAN(slot)]]) >> 17;
#else				
				{
					smpl += (sample*LPANTABLE[Enc]) >> SHIFT;
					smpr += (sample*RPANTABLE[Enc]) >> SHIFT;
				}
#endif
			}
#if FM_DELAY
			SCSPs[0].RINGBUF[(SCSPs[0].BUFPTR + 64 - (FM_DELAY - 1)) & 63] = SCSPs[0].DELAYBUF[(SCSPs[0].DELAYPTR + FM_DELAY - (FM_DELAY - 1)) % FM_DELAY];
#endif
			++SCSPs[0].BUFPTR;
			SCSPs[0].BUFPTR &= 63;
#if FM_DELAY
			++SCSPs[0].DELAYPTR;
			if (SCSPs[0].DELAYPTR > FM_DELAY - 1) SCSPs[0].DELAYPTR = 0;
#endif
			if (HasSlaveSCSP)
#if FM_DELAY
				RBUFDST = SCSPs[1].DELAYBUF + SCSPs[1].DELAYPTR;
#else
				RBUFDST = SCSPs[1].RINGBUF + SCSPs[1].BUFPTR;
#endif
			{
				if (SCSPs[1].Slots[sl].active)
				{
					_SLOT *slot = SCSPs[1].Slots + sl;
					UINT16 Enc;

					signed int sample = (int)(slaveBalance*(float)SCSP_UpdateSlot(slot));

					Enc = ((TL(slot)) << 0x0) | ((IMXL(slot)) << 0xd);
					SCSPDSP_SetSample(&SCSPs[1].DSP, (sample*LPANTABLE[Enc]) >> (SHIFT - 2), ISEL(slot), IMXL(slot));
					Enc = ((TL(slot)) << 0x0) | ((DIPAN(slot)) << 0x8) | ((DISDL(slot)) << 0xd);
					{
#ifdef RB_VOLUME
						smpl += (sample * volume[TL(slot) + pan_left[DIPAN(slot)]]) >> 17;
						smpr += (sample * volume[TL(slot) + pan_right[DIPAN(slot)]]) >> 17;
#else				
						smpl += (sample*LPANTABLE[Enc]) >> SHIFT;
						smpr += (sample*RPANTABLE[Enc]) >> SHIFT;
					}
#endif
				}
#if FM_DELAY
				SCSPs[1].RINGBUF[(SCSPs[1].BUFPTR + 64 - (FM_DELAY - 1)) & 63] = SCSPs[1].DELAYBUF[(SCSPs[1].DELAYPTR + FM_DELAY - (FM_DELAY - 1)) % FM_DELAY];
#endif
				++SCSPs[1].BUFPTR;
				SCSPs[1].BUFPTR &= 63;
#if FM_DELAY
				++SCSPs[1].DELAYPTR;
				if (SCSPs[1].DELAYPTR > FM_DELAY - 1) SCSPs[1].DELAYPTR = 0;
#endif
			}

	}

		SCSPDSP_Step(&SCSPs[0].DSP);
		if (HasSlaveSCSP)
			SCSPDSP_Step(&SCSPs[1].DSP);

		//		smpl=0;
		//		smpr=0;
		for (i = 0; i < 16; ++i)
		{
			_SLOT *slot = SCSPs[0].Slots + i;
			if (legacySound == true) {
				if (EFSDL(slot))
				{
					// For legacy option, 14 is the most reasonable value I can set at the moment for the EFSDL slot. - Paul
					UINT16 Enc = ((EFPAN(slot)) << 0x8) | ((EFSDL(slot)) << 0xe);
					smpl += (int)(masterBalance*(float)(((SCSPs[0].DSP.EFREG[i] * LPANTABLE[Enc]) >> SHIFT)));
					smpr += (int)(masterBalance*(float)(((SCSPs[0].DSP.EFREG[i] * RPANTABLE[Enc]) >> SHIFT)));
				}
				if (HasSlaveSCSP)
				{
					_SLOT *slot = SCSPs[1].Slots + i;
					if (EFSDL(slot))
					{
						UINT16 Enc = ((EFPAN(slot)) << 0x8) | ((EFSDL(slot)) << 0xe);
						smpl += (int)(slaveBalance*(float)(((SCSPs[1].DSP.EFREG[i] * LPANTABLE[Enc]) >> SHIFT)));
						smpr += (int)(slaveBalance*(float)(((SCSPs[1].DSP.EFREG[i] * RPANTABLE[Enc]) >> SHIFT)));
					}
				}
			}
			else {
				if (EFSDL(slot))
				{
					UINT16 Enc = ((EFPAN(slot)) << 0x8) | ((EFSDL(slot)) << 0xd);
					smpl += (int)(masterBalance*(float)(((SCSPs[0].DSP.EFREG[i] * LPANTABLE[Enc]) >> SHIFT)));
					smpr += (int)(masterBalance*(float)(((SCSPs[0].DSP.EFREG[i] * RPANTABLE[Enc]) >> SHIFT)));
				}
				if (HasSlaveSCSP)
				{
					_SLOT *slot = SCSPs[1].Slots + i;
					if (EFSDL(slot))
					{
						UINT16 Enc = ((EFPAN(slot)) << 0x8) | ((EFSDL(slot)) << 0xd);
						smpl += (int)(slaveBalance*(float)(((SCSPs[1].DSP.EFREG[i] * LPANTABLE[Enc]) >> SHIFT)));
						smpr += (int)(slaveBalance*(float)(((SCSPs[1].DSP.EFREG[i] * RPANTABLE[Enc]) >> SHIFT)));
					}
				}
			}
		}

		if (DAC18B(SCSP))
		{
			smpl = ICLIP18(smpl);
			smpr = ICLIP18(smpr);
		}
		else
		{
			smpl = ICLIP16(smpl >> 2);
			smpr = ICLIP16(smpr >> 2);
		}
		*bufl++ = ICLIP16(smpl);
		*bufr++ = ICLIP16(smpr);


		SCSP_TimersAddTicks(1);
		CheckPendingIRQ();
		lastdiff = Run68kCB(slice - lastdiff);
		}
	}

void SCSP_Update()
{
	SCSP_DoMasterSamples(length);
}

void SCSP_SetCB(int (*Run68k)(int cycles),void (*Int68k)(int irq))
{
	Int68kCB=Int68k;
	Run68kCB=Run68k;
}

void SCSP_MidiIn(BYTE val)
{
	/*
	 * MIDI FIFO critical section
	 */
	if (s_multiThreaded)
		MIDILock->Lock();
		
	//DebugLog("Midi Buffer push %02X",val);
	MidiStack[MidiW++]=val;
	MidiW&=MIDI_STACK_SIZE_MASK;
	MidiInFill++;
	//Int68kCB(IrqMidi);
//	SCSP.data[0x20/2]|=0x8;

	if (s_multiThreaded)
		MIDILock->Unlock();
}

void SCSP_MidiOutW(BYTE val)
{
	/*
	 * MIDI FIFO critical section
	 */
	if (s_multiThreaded)
		MIDILock->Lock();

	//printf("68K: MIDI out\n");
	//DebugLog("Midi Out Buffer push %02X",val);
	MidiStack[MidiOutW++]=val;
	MidiOutW&=31;
	++MidiOutFill;

	if (s_multiThreaded)
		MIDILock->Unlock();
}


unsigned char SCSP_MidiOutR()
{
	unsigned char val;

	if(MidiOutR==MidiOutW)	// I don't think this needs to be a critical section...
		return 0xff;
		
	/*
	 * MIDI FIFO critical section
	 */
	if (s_multiThreaded)
		MIDILock->Lock();

	val=MidiStack[MidiOutR++];
	//DebugLog("Midi Out Buffer pop %02X",val);
	MidiOutR&=31;
	--MidiOutFill;
	
	if (s_multiThreaded)
		MIDILock->Unlock();
		
	return val;
}

unsigned char SCSP_MidiOutFill()
{
	unsigned char v;
	
	/*
	 * MIDI FIFO critical section
	 */
	if (s_multiThreaded)
		MIDILock->Lock();

	v = MidiOutFill;
	
	if (s_multiThreaded)
		MIDILock->Unlock();
	
	return v;
}

unsigned char SCSP_MidiInFill()
{
	unsigned char v;
	
	/*
	 * MIDI FIFO critical section
	 */
	if (s_multiThreaded)
		MIDILock->Lock();

	v = MidiInFill;
	
	if (s_multiThreaded)
		MIDILock->Unlock();
	
	return v;
}

void SCSP_RTECheck()
{
/*	unsigned short pend=SCSP.data[0x20/2]&0xfff;
	if(pend)
	{
		if(pend&0x40)
		{
			Int68kCB(IrqTimA);
			return;
		}
		if(pend&(0x80|0x100))
		{
			Int68kCB(IrqTimBC);
			return;
		}
		if(pend&0x8)
			Int68kCB(IrqMidi);
	}
*/
}



void SCSP_Master_w8(unsigned int addr,unsigned char val)
{
	SCSP=SCSPs+0;
	SCSP_w8(addr,val);
}

void SCSP_Master_w16(unsigned int addr,unsigned short val)
{
	SCSP=SCSPs+0;
	SCSP_w16(addr,val);
}

void SCSP_Master_w32(unsigned int addr,unsigned int val)
{
	SCSP=SCSPs+0;
	SCSP_w32(addr,val);
}

void SCSP_Slave_w8(unsigned int addr,unsigned char val)
{
	SCSP=SCSPs+1;
	SCSP_w8(addr,val);
}

void SCSP_Slave_w16(unsigned int addr,unsigned short val)
{
	SCSP=SCSPs+1;
	SCSP_w16(addr,val);
}

void SCSP_Slave_w32(unsigned int addr,unsigned int val)
{
	SCSP=SCSPs+1;
	SCSP_w32(addr,val);
}

unsigned char SCSP_Master_r8(unsigned int addr)
{
	SCSP=SCSPs+0;
	return SCSP_r8(addr);
}

unsigned short SCSP_Master_r16(unsigned int addr)
{
	SCSP=SCSPs+0;
	return SCSP_r16(addr);
}

unsigned int SCSP_Master_r32(unsigned int addr)
{
	SCSP=SCSPs+0;
	return SCSP_r32(addr);
}

unsigned char SCSP_Slave_r8(unsigned int addr)
{
	SCSP=SCSPs+1;
	return SCSP_r8(addr);
}

unsigned short SCSP_Slave_r16(unsigned int addr)
{
	SCSP=SCSPs+1;
	return SCSP_r16(addr);
}

unsigned int SCSP_Slave_r32(unsigned int addr)
{
	SCSP=SCSPs+1;
	return SCSP_r32(addr);
}


/******************************************************************************
 Supermodel Interface Functions
******************************************************************************/

void SCSP_SaveState(CBlockFile *StateFile)
{
	StateFile->NewBlock("SCSP x 2", __FILE__);
	
	/*
	 * Save global variables.
	 *
	 * Difficult to say exactly what is necessary given that many things are
	 * commented out and should not be enabled but I try to save as much as
	 * possible. 
	 *
	 * Things not saved:
	 *
	 *	- FNS table (populated by SCSP_Init() and only read)
	 *	- RB_VOLUME stuff
	 * 	- ARTABLE, DRTABLE
	 *	- RBUFDST
	 */
	StateFile->Write(&IrqTimA, sizeof(IrqTimA));
	StateFile->Write(&IrqTimBC, sizeof(IrqTimBC));
	StateFile->Write(&IrqMidi, sizeof(IrqMidi));
	StateFile->Write(MidiOutStack, sizeof(MidiOutStack));
	StateFile->Write(&MidiOutW, sizeof(MidiOutW));
	StateFile->Write(&MidiOutR, sizeof(MidiOutR));
	StateFile->Write(MidiStack, sizeof(MidiStack));
	StateFile->Write(&MidiOutFill, sizeof(MidiOutFill));
	StateFile->Write(&MidiInFill, sizeof(MidiInFill));
	StateFile->Write(&MidiW, sizeof(MidiW));
	StateFile->Write(&MidiR, sizeof(MidiR));
	StateFile->Write(TimPris, sizeof(TimPris));
	StateFile->Write(TimCnt, sizeof(TimCnt));
	
	// Save both SCSP states
	for (int i = 0; i < 2; i++)
	{
		StateFile->Write(SCSPs[i].datab, sizeof(SCSPs[i].datab));
		StateFile->Write(&(SCSPs[i].BUFPTR), sizeof(SCSPs[i].BUFPTR));
		StateFile->Write(&(SCSPs[i].Master), sizeof(SCSPs[i].Master));
#if FM_DELAY
		StateFile->Write(&(SCSPs[i].DELAYBUF), sizeof(SCSPs[i].DELAYBUF));
		StateFile->Write(&(SCSPs[i].DELAYPTR), sizeof(SCSPs[i].DELAYPTR));
#endif
		
		// Save each slot
		for (int j = 0; j < 32; j++)
		{
			UINT64	baseOffset;
			UINT8	egState;
			
			StateFile->Write(SCSPs[i].Slots[j].datab, sizeof(SCSPs[i].Slots[j].datab));
			StateFile->Write(&(SCSPs[i].Slots[j].active), sizeof(SCSPs[i].Slots[j].active));
			baseOffset = (UINT64) (SCSPs[i].Slots[j].base - SCSPs[i].SCSPRAM);
			StateFile->Write(&baseOffset, sizeof(baseOffset));
			StateFile->Write(&(SCSPs[i].Slots[j].cur_addr), sizeof(SCSPs[i].Slots[j].cur_addr));
			StateFile->Write(&(SCSPs[i].Slots[j].nxt_addr), sizeof(SCSPs[i].Slots[j].nxt_addr));
			StateFile->Write(&(SCSPs[i].Slots[j].step), sizeof(SCSPs[i].Slots[j].step));
			StateFile->Write(&(SCSPs[i].Slots[j].Back), sizeof(SCSPs[i].Slots[j].Back));
			StateFile->Write(&(SCSPs[i].Slots[j].slot), sizeof(SCSPs[i].Slots[j].slot));
			StateFile->Write(&(SCSPs[i].Slots[j].Prev), sizeof(SCSPs[i].Slots[j].Prev));
			
			// EG
			StateFile->Write(&(SCSPs[i].Slots[j].EG.volume), sizeof(SCSPs[i].Slots[j].EG.volume));
			egState = SCSPs[i].Slots[j].EG.state;
			StateFile->Write(&egState, sizeof(egState));
			StateFile->Write(&(SCSPs[i].Slots[j].EG.step), sizeof(SCSPs[i].Slots[j].EG.step));
			StateFile->Write(&(SCSPs[i].Slots[j].EG.AR), sizeof(SCSPs[i].Slots[j].EG.AR));
			StateFile->Write(&(SCSPs[i].Slots[j].EG.D1R), sizeof(SCSPs[i].Slots[j].EG.D1R));
			StateFile->Write(&(SCSPs[i].Slots[j].EG.D2R), sizeof(SCSPs[i].Slots[j].EG.D2R));
			StateFile->Write(&(SCSPs[i].Slots[j].EG.RR), sizeof(SCSPs[i].Slots[j].EG.RR));
			StateFile->Write(&(SCSPs[i].Slots[j].EG.DL), sizeof(SCSPs[i].Slots[j].EG.DL));
			StateFile->Write(&(SCSPs[i].Slots[j].EG.EGHOLD), sizeof(SCSPs[i].Slots[j].EG.EGHOLD));
			StateFile->Write(&(SCSPs[i].Slots[j].EG.LPLINK), sizeof(SCSPs[i].Slots[j].EG.LPLINK));
			
			// PLFO
			StateFile->Write(&(SCSPs[i].Slots[j].PLFO.phase), sizeof(SCSPs[i].Slots[j].PLFO.phase));
			StateFile->Write(&(SCSPs[i].Slots[j].PLFO.phase_step), sizeof(SCSPs[i].Slots[j].PLFO.phase_step));
			
			// ALFO
			StateFile->Write(&(SCSPs[i].Slots[j].ALFO.phase), sizeof(SCSPs[i].Slots[j].ALFO.phase));
			StateFile->Write(&(SCSPs[i].Slots[j].ALFO.phase_step), sizeof(SCSPs[i].Slots[j].ALFO.phase_step));
			
			//when loading, make sure to compute lfo
		}
		
		// DSP
		StateFile->Write(&(SCSPs[i].DSP.RBP), sizeof(SCSPs[i].DSP.RBP));
		StateFile->Write(&(SCSPs[i].DSP.RBL), sizeof(SCSPs[i].DSP.RBL));
		StateFile->Write(SCSPs[i].DSP.COEF, sizeof(SCSPs[i].DSP.COEF));
		StateFile->Write(SCSPs[i].DSP.MADRS, sizeof(SCSPs[i].DSP.MADRS));
		StateFile->Write(SCSPs[i].DSP.MPRO, sizeof(SCSPs[i].DSP.MPRO));
		StateFile->Write(SCSPs[i].DSP.TEMP, sizeof(SCSPs[i].DSP.TEMP));
		StateFile->Write(SCSPs[i].DSP.MEMS, sizeof(SCSPs[i].DSP.MEMS));
		StateFile->Write(&(SCSPs[i].DSP.DEC), sizeof(SCSPs[i].DSP.DEC));
		StateFile->Write(SCSPs[i].DSP.MIXS, sizeof(SCSPs[i].DSP.MIXS));
		StateFile->Write(SCSPs[i].DSP.EXTS, sizeof(SCSPs[i].DSP.EXTS));
		StateFile->Write(SCSPs[i].DSP.EFREG, sizeof(SCSPs[i].DSP.EFREG));
		StateFile->Write(&(SCSPs[i].DSP.Stopped), sizeof(SCSPs[i].DSP.Stopped));
		StateFile->Write(&(SCSPs[i].DSP.LastStep), sizeof(SCSPs[i].DSP.LastStep));
	}
}

void SCSP_LoadState(CBlockFile *StateFile)
{
	if (OKAY != StateFile->FindBlock("SCSP x 2"))
	{
		ErrorLog("Unable to load SCSP state. Save state file is corrupt.");
		return;
	}
	
	// Load global variables
	StateFile->Read(&IrqTimA, sizeof(IrqTimA));
	StateFile->Read(&IrqTimBC, sizeof(IrqTimBC));
	StateFile->Read(&IrqMidi, sizeof(IrqMidi));
	StateFile->Read(MidiOutStack, sizeof(MidiOutStack));
	StateFile->Read(&MidiOutW, sizeof(MidiOutW));
	StateFile->Read(&MidiOutR, sizeof(MidiOutR));
	StateFile->Read(MidiStack, sizeof(MidiStack));
	StateFile->Read(&MidiOutFill, sizeof(MidiOutFill));
	StateFile->Read(&MidiInFill, sizeof(MidiInFill));
	StateFile->Read(&MidiW, sizeof(MidiW));
	StateFile->Read(&MidiR, sizeof(MidiR));
	StateFile->Read(TimPris, sizeof(TimPris));
	StateFile->Read(TimCnt, sizeof(TimCnt));
	
	// Load both SCSP states
	for (int i = 0; i < 2; i++)
	{
		StateFile->Read(SCSPs[i].datab, sizeof(SCSPs[i].datab));
		StateFile->Read(&(SCSPs[i].BUFPTR), sizeof(SCSPs[i].BUFPTR));
		StateFile->Read(&(SCSPs[i].Master), sizeof(SCSPs[i].Master));
#if FM_DELAY
		StateFile->Read(&(SCSPs[i].DELAYBUF), sizeof(SCSPs[i].DELAYBUF));
		StateFile->Read(&(SCSPs[i].DELAYPTR), sizeof(SCSPs[i].DELAYPTR));
#endif
		
		// Load each slot
		for (int j = 0; j < 32; j++)
		{
			UINT64	baseOffset;
			UINT8	egState;
			
			StateFile->Read(SCSPs[i].Slots[j].datab, sizeof(SCSPs[i].Slots[j].datab));
			StateFile->Read(&(SCSPs[i].Slots[j].active), sizeof(SCSPs[i].Slots[j].active));
			StateFile->Read(&baseOffset, sizeof(baseOffset));
			SCSPs[i].Slots[j].base = &(SCSPs[i].SCSPRAM[baseOffset&0xFFFFF]);	// clamp to 1 MB
			StateFile->Read(&(SCSPs[i].Slots[j].cur_addr), sizeof(SCSPs[i].Slots[j].cur_addr));
			StateFile->Read(&(SCSPs[i].Slots[j].nxt_addr), sizeof(SCSPs[i].Slots[j].nxt_addr));
			StateFile->Read(&(SCSPs[i].Slots[j].step), sizeof(SCSPs[i].Slots[j].step));
			StateFile->Read(&(SCSPs[i].Slots[j].Back), sizeof(SCSPs[i].Slots[j].Back));
			StateFile->Read(&(SCSPs[i].Slots[j].slot), sizeof(SCSPs[i].Slots[j].slot));
			StateFile->Read(&(SCSPs[i].Slots[j].Prev), sizeof(SCSPs[i].Slots[j].Prev));
			
			// EG
			StateFile->Read(&(SCSPs[i].Slots[j].EG.volume), sizeof(SCSPs[i].Slots[j].EG.volume));
			StateFile->Read(&egState, sizeof(egState));
			SCSPs[i].Slots[j].EG.state = (_STATE) egState;
			StateFile->Read(&(SCSPs[i].Slots[j].EG.step), sizeof(SCSPs[i].Slots[j].EG.step));
			StateFile->Read(&(SCSPs[i].Slots[j].EG.AR), sizeof(SCSPs[i].Slots[j].EG.AR));
			StateFile->Read(&(SCSPs[i].Slots[j].EG.D1R), sizeof(SCSPs[i].Slots[j].EG.D1R));
			StateFile->Read(&(SCSPs[i].Slots[j].EG.D2R), sizeof(SCSPs[i].Slots[j].EG.D2R));
			StateFile->Read(&(SCSPs[i].Slots[j].EG.RR), sizeof(SCSPs[i].Slots[j].EG.RR));
			StateFile->Read(&(SCSPs[i].Slots[j].EG.DL), sizeof(SCSPs[i].Slots[j].EG.DL));
			StateFile->Read(&(SCSPs[i].Slots[j].EG.EGHOLD), sizeof(SCSPs[i].Slots[j].EG.EGHOLD));
			StateFile->Read(&(SCSPs[i].Slots[j].EG.LPLINK), sizeof(SCSPs[i].Slots[j].EG.LPLINK));
			
			// PLFO
			StateFile->Read(&(SCSPs[i].Slots[j].PLFO.phase), sizeof(SCSPs[i].Slots[j].PLFO.phase));
			StateFile->Read(&(SCSPs[i].Slots[j].PLFO.phase_step), sizeof(SCSPs[i].Slots[j].PLFO.phase_step));
			
			// ALFO
			StateFile->Read(&(SCSPs[i].Slots[j].ALFO.phase), sizeof(SCSPs[i].Slots[j].ALFO.phase));
			StateFile->Read(&(SCSPs[i].Slots[j].ALFO.phase_step), sizeof(SCSPs[i].Slots[j].ALFO.phase_step));

			// Recompute LFOs
			Compute_LFO(&(SCSPs[i].Slots[j]));
		}
		
		// DSP
		StateFile->Read(&(SCSPs[i].DSP.RBP), sizeof(SCSPs[i].DSP.RBP));
		StateFile->Read(&(SCSPs[i].DSP.RBL), sizeof(SCSPs[i].DSP.RBL));
		StateFile->Read(SCSPs[i].DSP.COEF, sizeof(SCSPs[i].DSP.COEF));
		StateFile->Read(SCSPs[i].DSP.MADRS, sizeof(SCSPs[i].DSP.MADRS));
		StateFile->Read(SCSPs[i].DSP.MPRO, sizeof(SCSPs[i].DSP.MPRO));
		StateFile->Read(SCSPs[i].DSP.TEMP, sizeof(SCSPs[i].DSP.TEMP));
		StateFile->Read(SCSPs[i].DSP.MEMS, sizeof(SCSPs[i].DSP.MEMS));
		StateFile->Read(&(SCSPs[i].DSP.DEC), sizeof(SCSPs[i].DSP.DEC));
		StateFile->Read(SCSPs[i].DSP.MIXS, sizeof(SCSPs[i].DSP.MIXS));
		StateFile->Read(SCSPs[i].DSP.EXTS, sizeof(SCSPs[i].DSP.EXTS));
		StateFile->Read(SCSPs[i].DSP.EFREG, sizeof(SCSPs[i].DSP.EFREG));
		StateFile->Read(&(SCSPs[i].DSP.Stopped), sizeof(SCSPs[i].DSP.Stopped));
		StateFile->Read(&(SCSPs[i].DSP.LastStep), sizeof(SCSPs[i].DSP.LastStep));
	}
}

void SCSP_SetBuffers(INT16 *leftBufferPtr, INT16 *rightBufferPtr, int bufferLength)
{
	SoundClock = 76;
	bufferl = leftBufferPtr;
	bufferr = rightBufferPtr;
	length = bufferLength;
	cnts = 0;		// what is this for? seems unimportant but need to find out
}

void SCSP_Deinit(void)
{
#ifdef USEDSP
	free(SCSP->MIXBuf);
#endif
	free(buffertmpl);
	free(buffertmpr);
	delete MIDILock;
	buffertmpl = NULL;
	buffertmpr = NULL;
	MIDILock = NULL;
}