Ian Curtis
4d275ba49e
Parse siblings after children. It's the only way to get Daytona water fall to look correct without h/w poly sorting.
2018-05-03 18:37:49 +00:00
Bart Trzynadlowski
3f9b1b76e5
Added a stretch mode (-stretch) and modified new renderer's viewport code (hopefully correctly) to handle aspect ratio correction and widening the way the legacy one does.
2018-05-03 03:46:44 +00:00
Ian Curtis
c6b86c0812
Render the opaque part of texture transparency in the first pass. Fixes numerous transparency related issues in lemans24 and some in ocean hunter. I don't really know if this is the 'correct' way of solving this because the real3d pro-1000 is a complete black box. There is still a lot we don't understand about how it handles transparency.
2018-05-02 20:10:02 +00:00
Ian Curtis
11a3cdbfd1
remove unnecessary copies
2018-04-24 13:51:53 +00:00
Ian Curtis
d21e71dced
work around for non working jtag code in star wars
2018-03-21 10:26:05 +00:00
Ian Curtis
b184ca3e1b
Clamping must be applied before the spotlight is applied on step 1.0 h/w.
2018-03-10 09:13:28 +00:00
Ian Curtis
8266eecabb
Parse out line of sight position. Only known to be used by scud.
2018-01-15 21:27:21 +00:00
Ian Curtis
99b5b9ba1b
make the logic a bit clearer
2018-01-15 14:40:59 +00:00
Ian Curtis
22a6166b82
fix Ian's bad maths :)
2018-01-15 13:08:39 +00:00
Ian Curtis
a1350d95a2
Update microtexture coordinate logic (Harry Tuttle)
2018-01-14 12:56:24 +00:00
Ian Curtis
863ea95013
simplify maths
2018-01-10 20:37:21 +00:00
Ian Curtis
adb5196625
comment out unneeded code
2018-01-10 16:12:33 +00:00
Ian Curtis
d708ce9ba2
top/bottom were swapped for off axis projection
2018-01-10 16:08:02 +00:00
Ian Curtis
6efa03112e
Rewrite projection maths based upon previously unknown viewport values. The previous values used roughly worked as the normals for frustum planes. Perhaps they were only used for culling and not actually rendering, as sometimes the values don't work correctly.
2018-01-08 18:35:42 +00:00
Ian Curtis
cc28d5f00e
Implement sub 8x8 tile encoding. Fixes incomplete mipmap chains which previously only went down to 8x8 pixels before. It wasn't known these textures existed before. (Harry Tuttle)
2017-12-17 22:25:50 +00:00
Ian Curtis
cede67468c
Fix some bad/missing textures in fighting vipers. The game is referencing totally illegal texture sizes. The real h/w was just handling it somehow, whilst we were returning null for the textures. This might produce junk textures for the lower mipmaps, but this can be clamped in a later update.
2017-12-13 01:21:25 +00:00
Ian Curtis
62d9584b0d
Shift fog maths to fragment shader to fix bug in virtua on.
2017-11-23 17:51:51 +00:00
Ian Curtis
bddc86aba9
The vertex shader is run before clipping is done. If fogging values are calculated and clamped in the vertex shader it can interpolate bad values, since the range has been truncated. This happens if the polys overlap the near plane. The solution to clamp the values in the fragment shader. This fixes a bunch of fogging errors I long thought were transparency related errors in the ocean hunter.
2017-11-20 22:21:15 +00:00
Ian Curtis
bc7f1e9fac
Fixed shading also works with untextured polys. Fixes some shading issues in La machineguns. (Harry Tuttle)
2017-11-07 00:15:57 +00:00
Ian Curtis
df44ad458b
Update step 1.5 luminous logic with Harry's findings. Fixes various shading issues.
2017-11-05 13:25:33 +00:00
Ian Curtis
8e13c3bbb9
Finish the hash function (Harry Tuttle)
2017-10-19 20:48:53 +00:00
Ian Curtis
7f6df0cc84
Remove fixed shading check from specular.
2017-10-07 12:39:30 +00:00
Ian Curtis
eb798ed15e
Star wars is the only game to pass unsigned fixed shaded values (per vertex brightness) to the renderer. Originally we thought that the specular flag would turn on unsigned values since it's the only game to set specular with these polys, but this logic turned out to be incorrect. The JTAG interface seems to config the GPU to turn on this functionality. (Harry Tuttle)
2017-10-05 19:15:00 +00:00
Ian Curtis
43cf6b3bbf
update spotlight code (Harry Tuttle)
2017-10-05 18:49:08 +00:00
Ian Curtis
9bac7836ed
add missing header
2017-09-30 19:05:04 +00:00
Ian Curtis
0afd9026dc
Fix the sky in one of the levels in virtua on. The problem was caused by the fact we didn't split the mesh by the fog % burn through, so all the polys had the same value. We could use a vertex attrib, but % burn through fog is so rarely used and when it is, normally every poly in the mesh has the same value.
2017-09-26 00:30:08 +00:00
Bart Trzynadlowski
55bb02d4e5
- New work-in-progress frame timing code (disabled by default, compile with NEW_FRAME_TIMING defined to activate it)
...
- New JTAG emulation, moved into its own class, CJTAG
- Removed game-specific sun clamp hacks from CNew3D (JTAG and Real3D emulation will call the appropriate method to configure this at run-time)
- Removed JTAG from Real3D save state data and reused some of that space for new state variables having to do with the internal JTAG-based config as well as new frame timing state variables
2017-09-24 20:52:48 +00:00
Ian Curtis
a3e2fb7906
Calculating the length of the vertex results in quite broken values for fogging when the vertices are traversing the view frustum. The hardware also wouldn't have been doing a square root per vertex for fogging. Simply using the z values is enough. Todo check clamping of values for the near/far planes.
2017-09-06 13:07:39 +00:00
Ian Curtis
2786d95795
add interface for sun clamp
2017-09-02 14:54:16 +00:00
Ian Curtis
266c911133
Optimise vertex data to cut down on unnecessary copying
2017-08-30 21:45:25 +00:00
Ian Curtis
165926aa06
Modern hardware does backface culling in window space by calculating the face normal for the polygon, then doing a dot product against the view vector. The real3d pro-1000 on the other hand passes a pre-calculated face normal for each polygon which is used for culling. We were using this face normal to rewind the polygons so that regular backface culling would work. This worked 99.9% of the time. However this was failing on some models in Virtua Striker. The reason was because the pre-calculated face normals being passed were actually completely different to the actual face normals for the poly (not just inverted like you would expect). This broke our code. The solution was to emulate face culling directly in the vertex shader using the pre-calculated face normals directly. Only minimally tested this but hopefully there are no obvious regressions.
2017-08-29 10:27:29 +00:00
Ian Curtis
50d1f95648
Changed fixed shaded logic for step 1.5 hw based upon Harry's findings
2017-08-25 22:40:39 +00:00
Ian Curtis
b21ed49512
cosmetic
2017-08-21 23:00:29 +00:00
Ian Curtis
cd5978773a
Harry made some important discoveries with regards to fixed shading on the model 3 (per vertex poly brightness values). Firstly values are allowed to be negative, and they are used as a drop in replacement in the standard lighting equation for the normal dot light vector. This quite radically changes the brightness in LA Machine guns, but now correctly matches the arcade.
2017-08-19 20:06:31 +00:00
Ian Curtis
0efd4dac39
Finish fixed shading for 2.0 hardware. I'm pretty sure it actually works identically to step 1.5 hardware. The oddball is LA machine guns where the viewport ambient doesn't seem to effect the brightness. But the ambient works differently in this game because it uses the unclamped light model. Still need to investigate if the diffuse factor effects fixed shading.
2017-08-15 23:21:57 +00:00
Ian Curtis
b1cc9a615d
With fixed shading, when lighting is disabled, fixed shading appears to be a flat shaded version based upon the poly colour, instead of per vertex attributes.
2017-08-15 20:50:36 +00:00
Ian Curtis
2422caadc6
Pad struct and align on 4 byte boundary.
2017-08-15 20:45:08 +00:00
Ian Curtis
eac76f0908
simplify
2017-08-14 23:30:34 +00:00
Ian Curtis
81188bee07
fixed shading doesn't effect the alpha channel
2017-08-14 16:10:26 +00:00
Ian Curtis
c12e4c3215
Fixed shading (per vertex poly colours) on step 1.5 hardware have the viewport ambient value added to them. This fixes various shading on scud. To do this had to switch the maths to the vertex shader.
2017-08-14 09:14:06 +00:00
Ian Curtis
8f622714a7
Fix attribute locations. glBindAttribLocation must be called linking
2017-08-11 11:59:41 +00:00
Bart Trzynadlowski
a315627401
Added support for loading shaders from files for new engine and tile renderer. Changed help text to reflect new engine being default.
2017-08-11 00:41:10 +00:00
Ian Curtis
d7403afda6
use generic vertex attributes
2017-08-10 15:43:03 +00:00
Ian Curtis
57d0a513fd
Technically matrix casts are only allowed in glsl 1.2 and later
2017-08-09 23:25:01 +00:00
Ian Curtis
5709ee2659
Sometime ago I managed to work out that specular on the model3 is not real specular, and really is just an extension of diffuse lighting. But attempts were derailed by corner cases and the fact we were not handling the normals correctly. Anyway Harry managed to successfully come up with an algorithm, and coefficients that give an almost perfect match to specular on the model3, based soley on observations from video footage! He also worked out that the lighting on hardware 1.5 onwards appears to be unclamped (ie greater than 1). This quite radically changes the brightness of some of the games, but much better matches the original hardware.
2017-08-09 16:56:56 +00:00
Ian Curtis
1d338877fc
cosmetic
2017-08-03 11:05:04 +00:00
Ian Curtis
3fc28159eb
Add the unclamped light model we know exists to the shaders.
2017-08-03 10:41:18 +00:00
Ian Curtis
b1bd877b82
Ski champ for some reason is passing denormalised numbers for the modelscale. This is causing a NaN in our shader killing the lighting for these models, so we simply skip these, since they are essentially zero anyway. Thanks to Harry for finding this bug :)
2017-08-01 23:48:53 +00:00
Ian Curtis
9aa3f13777
We were force normalising the result of matrix * normal, which looked correct in most cases. But this didn't preserve the scaling of the matrix, or the scaling of the model normals which resulted in many over bright areas. On it's own this generally worked, but games like Star Wars looked quite broken. Harry correctly figured out if you scale these normals by the scaling value that is sometimes present in the culling nodes the lighting looks correct. Still more work to do to correctly figure out the model3's lighting model.
2017-07-29 16:30:30 +00:00
Ian Curtis
a9b49c1676
Implement unclamped light model based upon Harry's findings. Unknown how this is turned on/off.
2017-07-22 17:15:14 +00:00
