gm-matthew
38a95088e8
Prevent "ROLLING START" scrolling glitch in Scud Race
...
There is a quirk of the tilegen chip that causes this glitch not to occur on real hardware, but we can't be sure what it is without testing
Much easier to just patch all the Scud Race ROM sets
2023-09-02 20:40:40 -07:00
gm-matthew
c9b718e89a
Fix Z80Debug.cpp compile with C++20
...
String literals should not be used to initialize char* but C++17 and earlier were letting it slide
2023-09-02 20:38:24 -07:00
Bart Trzynadlowski
ebff9a8b2d
SCSP: added more detail to comment explaining 68K clock speed as recommended by Brian Troha
2023-09-02 20:32:11 -07:00
gm-matthew
b2fee4242c
DMA device register always returns Step 1.x PCI ID
...
Step 2.x games by AM3 request PCI ID this way and expect to see 0x16c311db
2023-08-20 17:43:40 -07:00
gm-matthew
7924fed369
Set soundboard CPU to correct clock speed
...
The 68K on the soundboard is rated at 12 MHz but runs at 11.2896 MHz, which is 256 cycles/sample with a 44100 Hz sample rate. Removed SoundClock and Freq as they are not needed
2023-08-20 17:43:27 -07:00
gm-matthew
015e8e9212
Drive board uses the value 0xFF (not 0x00) on ports 42 and 45 to stop all effects when port 46 is set to 0xFF; fixes FFB effects continuing after game ends
2023-07-01 23:21:51 -07:00
Matthew Daniels
84aa972ef2
Add description of swtrilgy patch from MAME
...
Star Wars Trilogy will sometimes write to a JTAG register and then read it back to verify it, but this doesn't work correctly with Supermodel's current JTAG implementation; it will try again and never succeed, getting stuck in an infinite loop. This patch stops the code from branching up and trying the write/read cycle again, allowing the subroutine to continue normally.
We need to implement shift register widths correctly for each JTAG device (Mercury, Venus, Earth, etc.) for the unpatched code to work properly... right now Supermodel implements one JTAG device with a huge 197-bit data shift register
2023-05-16 23:56:03 -07:00
Bart Trzynadlowski
ac0e6407b4
Games.xml: Removed seemingly unnecessary swtrilgy and swtrilgya patches, which should re-enable JTAG configuration and fix Endor Death Star tunnel shading
2023-05-07 21:51:22 -07:00
ToBul
583d237b2b
Fix GCC 13 build.
...
MSYS and probably a few Linux distros are now shipping GCC 13.
The new standards and issues are listed here,
https://gcc.gnu.org/gcc-13/porting_to.html
2023-05-07 21:42:21 -07:00
CapitaineSheridan
18f3c23a9f
Work around to prevent I/O error after a while on fishing games with tension
2023-05-07 21:41:57 -07:00
CapitaineSheridan
813edb8218
Crosshair optimization:
...
-create crosshairs only once in Init() instead of created them at every cycle
-use matrix scale to apply the aspect ratio
2023-05-07 21:41:05 -07:00
Bart Trzynadlowski
6993dfcfb0
Makefile.Win32: fixed detection of Windows Command Prompt for rmdir command
2023-03-28 15:38:43 -07:00
Bart Trzynadlowski
87de86f7d1
Crosshair: use actual adjusted viewport resolution (configuration resolution is not the same thing). Fixes crosshair alignment for resolutions with non-Model 3 aspect.
2023-03-18 10:00:28 -07:00
Bart Trzynadlowski
95fc08e0a3
Windows app manifest added to enable PerMonitorV2 DPI awareness
2023-03-15 18:24:01 -07:00
ToBul
f497de50d1
Update README.txt
...
Fix old typos, leaving alone the American English.
Remove the "Virtua Striker 2 '99" unlock code.
I don't think it works, others have also tried,
https://www.supermodel3.com/Forum/viewtopic.php?f=3&t=2096&p=19784#p19784
2023-03-15 17:35:48 -07:00
Bart Trzynadlowski
5fdb50a869
README.txt: Updated Section 5 (video settings), squeezed everything back into 80 columns, changed 'Virtua Fighter 2 '98' to 'Virtua Striker 2 '98' in Section 10
2023-03-14 17:56:17 -07:00
Bart Trzynadlowski
b5ca365928
NetBoard: guard against freeing null pointers and INetBoard needed a virtual destructor (was causing crashes on exit on some systems)
2023-03-14 11:18:20 -07:00
CapitaineSheridan
3848d276da
Autobuild script update following crosshair update
2023-03-14 00:59:18 -07:00
CapitaineSheridan
abc2900770
m_crosshair is not needed and the config should be checked every frame because otherwise Alt-I command was broken (the number of crosshairs to render is mapped to a UI key) [Bart]
2023-03-13 20:18:51 -07:00
CapitaineSheridan
a319bbee0c
Better optimisations.
...
Moved all UI rendering from Main to CCrosshair.
Take care of syntax about crosshair style.
2023-03-13 20:18:51 -07:00
CapitaineSheridan
b19fdb6a77
Change Media folder to Assets folder.
...
Naming variable convention.
Command line change -crosshair-style = vector|bmp.
Config ini variable change CrosshairStyle = vector|bmp.
CCrosshair::DrawCrosshair optimisation.
Modifying UpdateCrosshairs() to eliminate global variable.
2023-03-13 20:18:51 -07:00
CapitaineSheridan
1b066fe4b3
Crosshair refactor
...
-add a new separate class for crosshair
-crosshair coordinates are calculated by matrix instead of recreating every object at correct coordinates
-add ability to scale crosshair by dpi
-add ability to use bitmap crosshair (located in ./Media/). 32bits bmp format + alpha
-cmd line "-bitmapcrosshair" or "-vectorcrosshair" and/or BitmapCrosshair=0|1 in config file
-these changes are only for lost world game with Crosshairs=1|2|3
don't forget to copy the 2 crosshair images in Supermodel/Media folder
2023-03-13 20:18:51 -07:00
Bart Trzynadlowski
0cc1b37f95
README.txt: Fixed a typo, end-of-sentence formatting in section 10, and added ECA cheat codes as per Brian Troha's suggestion
2023-03-13 20:10:08 -07:00
Bart Trzynadlowski
05c57abc2f
README.txt: fixed typo
2023-03-11 11:08:10 -08:00
Bart Trzynadlowski
188bb5c285
README.txt: Added region codes to section 10 (c/o Brian Troha)
2023-03-10 18:13:04 -08:00
Bart Trzynadlowski
7e7686c6f2
Games.xml: Corrected name of Virtual On 2 to Cyber Troopers Virtual-On Oratorio Tangram
2023-03-10 14:59:10 -08:00
Bart Trzynadlowski
ae5af4c036
Fixed window position config storage and command line parsing
2023-03-09 10:34:51 -08:00
Bart Trzynadlowski
83144f80b7
Config nodes: added the ability to clear out node values or create empty leaf nodes
2023-03-09 10:34:51 -08:00
joachim
043f901c80
comply to @trzy requested changes #
2023-03-09 10:34:51 -08:00
joachim
4a64a0df71
comply to @trzy requested changes
2023-03-09 10:34:51 -08:00
joachim
c301a574ed
-pos=<x>,<y> -> correct error when not present
2023-03-09 10:34:51 -08:00
joachim
c97e3acce7
Add two video settings:
...
-pos=<x>,<y> Position [Default: centered]
-borderless Windowed mode with no border
These 2 settings are usefull when setting up a multiplayer game on one machine.
Example for 4 windows in fullHD:
start "Master" /D"Master_P4" Supermodel.exe -input-system=sdl ..\ROMS\dayto2pe.zip -res=960,540 -borderless -pos=0,0
start "Slave1" /D"Slave1_P4" Supermodel.exe -input-system=sdl ..\ROMS\dayto2pe.zip -res=960,540 -borderless -pos=960,0
start "Slave2" /D"Slave2_P4" Supermodel.exe -input-system=sdl ..\ROMS\dayto2pe.zip -res=960,540 -borderless -pos=0,540
start "Slave3" /D"Slave3_P4" Supermodel.exe -input-system=sdl ..\ROMS\dayto2pe.zip -res=960,540 -borderless -pos=960,540
2023-03-09 10:34:51 -08:00
joachim
5fa190490d
Allow joystick to be fetch if windows has no focus in SDL input mode.
...
This is usefull for multiple instance of supermodel networked on the same machine.
2023-03-09 10:34:51 -08:00
Bart Trzynadlowski
f7dcc1c445
Games.xml and README.txt updated by Brian Troha (new Ocean Hunter ROM sets and several updates to version descriptions, etc.)
2023-03-06 21:47:03 -08:00
The Brink of Tomorrow
ffc320904e
Update README.md with macOS build details
...
Update README.md with macOS build and run instructions
2023-02-25 14:52:32 -08:00
Aaron Paden
78f5056223
Add missing filename to ErrorLog call.
2022-12-28 20:04:25 -08:00
CapitaineSheridan
7e025e64a2
Memory allocated but not released.
2022-12-28 18:24:11 -08:00
Ian Curtis
69a458ecf7
Make sure to invalidate texture memory when going fullscreen otherwise it might not be syned correctly.
2022-12-25 00:32:01 +00:00
Ian Curtis
11c01a349f
SDL_SetWindowFullscreen isn't needed as we call ResizeGLScreen which sets the fullscreen mode afterwards.
2022-12-24 23:54:47 +00:00
Ian Curtis
6dcf144694
We must explicitly call SDL_SetWindowFullscreen after setting the display mode otherwise the refresh rate doesn't change.
2022-12-24 17:29:08 +00:00
Ian Curtis
ad0aed42a4
be a bit more flexible with the display frequencies we'll match
2022-12-19 14:11:21 +00:00
Ian Curtis
25604512f4
The model 3 (actually model 1,2 and 3) all used some crazy refresh rate of 57.524hz. If your screen refresh rate is 60hz, supermodel will work fine, but really run too fast. Anyway if you create a custom refresh rate, supermodel will automatically pick this, and set it when the emulator is in fullscreen mode. Apparently this works with most monitors, even cheapo low end ones.
...
To active set your command line to:
-res=1920,1080 -vsync -fullscreen -true-hz
Replace the resolution with whatever your monitor's native resolution is.
2022-12-19 00:13:08 +00:00
Ian Curtis
984f78ad1b
Merge branch 'master' of https://github.com/trzy/Supermodel
2022-12-17 23:46:11 +00:00
Ian Curtis
57ead6037d
Better opengl resource allocation. Fixes going fullscreen and back.
2022-12-17 23:46:02 +00:00
gm-matthew
50d947deee
Add FileSystemPath.cpp to Visual Studio project
2022-12-14 00:29:25 -08:00
Fernando Casas Schössow
d83e4754fe
Fixed build on macOS
2022-12-12 16:49:07 -08:00
Fernando Casas Schössow
07429b9187
Switched to Util::Format() to generate screenshot filename
2022-12-12 16:49:07 -08:00
Fernando Casas Schössow
317f8bacde
First review code changes (identation and cosmetic changes)
2022-12-12 16:49:07 -08:00
Fernando Casas Schössow
d11efb8553
Changed pathType from string var to enum
2022-12-12 16:49:07 -08:00
Fernando Casas Schössow
df7787f040
Keep Supermodel files (config, nvram, saves, etc.) in a predictable path when running on Linux
2022-12-12 16:49:07 -08:00
