Commit graph

1045 commits

Author SHA1 Message Date
gm-matthew b2fee4242c DMA device register always returns Step 1.x PCI ID
Step 2.x games by AM3 request PCI ID this way and expect to see 0x16c311db
2023-08-20 17:43:40 -07:00
gm-matthew 7924fed369 Set soundboard CPU to correct clock speed
The 68K on the soundboard is rated at 12 MHz but runs at 11.2896 MHz, which is 256 cycles/sample with a 44100 Hz sample rate. Removed SoundClock and Freq as they are not needed
2023-08-20 17:43:27 -07:00
gm-matthew 015e8e9212 Drive board uses the value 0xFF (not 0x00) on ports 42 and 45 to stop all effects when port 46 is set to 0xFF; fixes FFB effects continuing after game ends 2023-07-01 23:21:51 -07:00
Matthew Daniels 84aa972ef2 Add description of swtrilgy patch from MAME
Star Wars Trilogy will sometimes write to a JTAG register and then read it back to verify it, but this doesn't work correctly with Supermodel's current JTAG implementation; it will try again and never succeed, getting stuck in an infinite loop. This patch stops the code from branching up and trying the write/read cycle again, allowing the subroutine to continue normally.

We need to implement shift register widths correctly for each JTAG device (Mercury, Venus, Earth, etc.) for the unpatched code to work properly... right now Supermodel implements one JTAG device with a huge 197-bit data shift register
2023-05-16 23:56:03 -07:00
Bart Trzynadlowski ac0e6407b4 Games.xml: Removed seemingly unnecessary swtrilgy and swtrilgya patches, which should re-enable JTAG configuration and fix Endor Death Star tunnel shading 2023-05-07 21:51:22 -07:00
ToBul 583d237b2b Fix GCC 13 build.
MSYS and probably a few Linux distros are now shipping GCC 13.
The new standards and issues are listed here,

https://gcc.gnu.org/gcc-13/porting_to.html
2023-05-07 21:42:21 -07:00
CapitaineSheridan 18f3c23a9f Work around to prevent I/O error after a while on fishing games with tension 2023-05-07 21:41:57 -07:00
CapitaineSheridan 813edb8218 Crosshair optimization:
-create crosshairs only once in Init() instead of created them at every cycle
-use matrix scale to apply the aspect ratio
2023-05-07 21:41:05 -07:00
Bart Trzynadlowski 6993dfcfb0 Makefile.Win32: fixed detection of Windows Command Prompt for rmdir command 2023-03-28 15:38:43 -07:00
Bart Trzynadlowski 87de86f7d1 Crosshair: use actual adjusted viewport resolution (configuration resolution is not the same thing). Fixes crosshair alignment for resolutions with non-Model 3 aspect. 2023-03-18 10:00:28 -07:00
Bart Trzynadlowski 95fc08e0a3 Windows app manifest added to enable PerMonitorV2 DPI awareness 2023-03-15 18:24:01 -07:00
ToBul f497de50d1 Update README.txt
Fix old typos, leaving alone the American English.
Remove the "Virtua Striker 2 '99" unlock code.
I don't think it works,  others have also tried,
https://www.supermodel3.com/Forum/viewtopic.php?f=3&t=2096&p=19784#p19784
2023-03-15 17:35:48 -07:00
Bart Trzynadlowski 5fdb50a869 README.txt: Updated Section 5 (video settings), squeezed everything back into 80 columns, changed 'Virtua Fighter 2 '98' to 'Virtua Striker 2 '98' in Section 10 2023-03-14 17:56:17 -07:00
Bart Trzynadlowski b5ca365928 NetBoard: guard against freeing null pointers and INetBoard needed a virtual destructor (was causing crashes on exit on some systems) 2023-03-14 11:18:20 -07:00
CapitaineSheridan 3848d276da Autobuild script update following crosshair update 2023-03-14 00:59:18 -07:00
CapitaineSheridan abc2900770 m_crosshair is not needed and the config should be checked every frame because otherwise Alt-I command was broken (the number of crosshairs to render is mapped to a UI key) [Bart] 2023-03-13 20:18:51 -07:00
CapitaineSheridan a319bbee0c Better optimisations.
Moved all UI rendering from Main to CCrosshair.
Take care of syntax about crosshair style.
2023-03-13 20:18:51 -07:00
CapitaineSheridan b19fdb6a77 Change Media folder to Assets folder.
Naming variable convention.
Command line change -crosshair-style = vector|bmp.
Config ini variable change CrosshairStyle = vector|bmp.
CCrosshair::DrawCrosshair optimisation.
Modifying UpdateCrosshairs() to eliminate global variable.
2023-03-13 20:18:51 -07:00
CapitaineSheridan 1b066fe4b3 Crosshair refactor
-add a new separate class for crosshair
-crosshair coordinates are calculated by matrix instead of recreating every object at correct coordinates
-add ability to scale crosshair by dpi
-add ability to use bitmap crosshair (located in ./Media/). 32bits bmp format + alpha
-cmd line "-bitmapcrosshair" or "-vectorcrosshair" and/or BitmapCrosshair=0|1 in config file
-these changes are only for lost world game with Crosshairs=1|2|3

don't forget to copy the 2 crosshair images in Supermodel/Media folder
2023-03-13 20:18:51 -07:00
Bart Trzynadlowski 0cc1b37f95 README.txt: Fixed a typo, end-of-sentence formatting in section 10, and added ECA cheat codes as per Brian Troha's suggestion 2023-03-13 20:10:08 -07:00
Bart Trzynadlowski 05c57abc2f README.txt: fixed typo 2023-03-11 11:08:10 -08:00
Bart Trzynadlowski 188bb5c285 README.txt: Added region codes to section 10 (c/o Brian Troha) 2023-03-10 18:13:04 -08:00
Bart Trzynadlowski 7e7686c6f2 Games.xml: Corrected name of Virtual On 2 to Cyber Troopers Virtual-On Oratorio Tangram 2023-03-10 14:59:10 -08:00
Bart Trzynadlowski ae5af4c036 Fixed window position config storage and command line parsing 2023-03-09 10:34:51 -08:00
Bart Trzynadlowski 83144f80b7 Config nodes: added the ability to clear out node values or create empty leaf nodes 2023-03-09 10:34:51 -08:00
joachim 043f901c80 comply to @trzy requested changes # 2023-03-09 10:34:51 -08:00
joachim 4a64a0df71 comply to @trzy requested changes 2023-03-09 10:34:51 -08:00
joachim c301a574ed -pos=<x>,<y> -> correct error when not present 2023-03-09 10:34:51 -08:00
joachim c97e3acce7 Add two video settings:
-pos=<x>,<y>            Position [Default: centered]
-borderless             Windowed mode with no border

These 2 settings are usefull when setting up a multiplayer game on one machine.

Example for 4 windows in fullHD:

start "Master" /D"Master_P4" Supermodel.exe -input-system=sdl ..\ROMS\dayto2pe.zip -res=960,540 -borderless -pos=0,0
start "Slave1" /D"Slave1_P4" Supermodel.exe -input-system=sdl ..\ROMS\dayto2pe.zip -res=960,540 -borderless -pos=960,0
start "Slave2" /D"Slave2_P4" Supermodel.exe -input-system=sdl ..\ROMS\dayto2pe.zip -res=960,540 -borderless -pos=0,540
start "Slave3" /D"Slave3_P4" Supermodel.exe -input-system=sdl ..\ROMS\dayto2pe.zip -res=960,540 -borderless -pos=960,540
2023-03-09 10:34:51 -08:00
joachim 5fa190490d Allow joystick to be fetch if windows has no focus in SDL input mode.
This is usefull for multiple instance of supermodel networked on the same machine.
2023-03-09 10:34:51 -08:00
Bart Trzynadlowski f7dcc1c445 Games.xml and README.txt updated by Brian Troha (new Ocean Hunter ROM sets and several updates to version descriptions, etc.) 2023-03-06 21:47:03 -08:00
The Brink of Tomorrow ffc320904e Update README.md with macOS build details
Update README.md with macOS build and run instructions
2023-02-25 14:52:32 -08:00
Aaron Paden 78f5056223 Add missing filename to ErrorLog call. 2022-12-28 20:04:25 -08:00
CapitaineSheridan 7e025e64a2 Memory allocated but not released. 2022-12-28 18:24:11 -08:00
Ian Curtis 69a458ecf7 Make sure to invalidate texture memory when going fullscreen otherwise it might not be syned correctly. 2022-12-25 00:32:01 +00:00
Ian Curtis 11c01a349f SDL_SetWindowFullscreen isn't needed as we call ResizeGLScreen which sets the fullscreen mode afterwards. 2022-12-24 23:54:47 +00:00
Ian Curtis 6dcf144694 We must explicitly call SDL_SetWindowFullscreen after setting the display mode otherwise the refresh rate doesn't change. 2022-12-24 17:29:08 +00:00
Ian Curtis ad0aed42a4 be a bit more flexible with the display frequencies we'll match 2022-12-19 14:11:21 +00:00
Ian Curtis 25604512f4 The model 3 (actually model 1,2 and 3) all used some crazy refresh rate of 57.524hz. If your screen refresh rate is 60hz, supermodel will work fine, but really run too fast. Anyway if you create a custom refresh rate, supermodel will automatically pick this, and set it when the emulator is in fullscreen mode. Apparently this works with most monitors, even cheapo low end ones.
To active set your command line to:
-res=1920,1080 -vsync -fullscreen -true-hz

Replace the resolution with whatever your monitor's native resolution is.
2022-12-19 00:13:08 +00:00
Ian Curtis 984f78ad1b Merge branch 'master' of https://github.com/trzy/Supermodel 2022-12-17 23:46:11 +00:00
Ian Curtis 57ead6037d Better opengl resource allocation. Fixes going fullscreen and back. 2022-12-17 23:46:02 +00:00
gm-matthew 50d947deee Add FileSystemPath.cpp to Visual Studio project 2022-12-14 00:29:25 -08:00
Fernando Casas Schössow d83e4754fe Fixed build on macOS 2022-12-12 16:49:07 -08:00
Fernando Casas Schössow 07429b9187 Switched to Util::Format() to generate screenshot filename 2022-12-12 16:49:07 -08:00
Fernando Casas Schössow 317f8bacde First review code changes (identation and cosmetic changes) 2022-12-12 16:49:07 -08:00
Fernando Casas Schössow d11efb8553 Changed pathType from string var to enum 2022-12-12 16:49:07 -08:00
Fernando Casas Schössow df7787f040 Keep Supermodel files (config, nvram, saves, etc.) in a predictable path when running on Linux 2022-12-12 16:49:07 -08:00
toxieainc db455ba5c1 add undefd codepath for correct use of the 18bit DAC path (which seems to be triggered for all games)
the volume correction to bring the data back into a valid range is not really needed in practice though, only Daytona2 seems to need it, and also only extremely rarely, so lets just live with a tiny bit of clamping for that game then

while add it, make some formatting similar to MAME, and add one comment regarding a most likely wrong recent MAME change
2022-11-29 12:36:27 -08:00
Ian Curtis 153c510009 Fix uniform location. 2022-11-26 12:58:07 +00:00
Matthew Daniels 7513cc769a Update Model3.cpp
whitespace
2022-11-25 15:27:12 -08:00