toxieainc
5f97e5af6c
address review
2022-10-03 17:59:59 -07:00
toxieainc
519d695f57
address review and move bit casts to new header
2022-10-03 17:59:59 -07:00
toxieainc
22ffb5cc19
Harmless math warning fixes. map->unordered_map in CNew3D::CacheModel. Avoid general aliasing problems (using bit_cast or the recommended/optimized-away memcpy).
2022-10-03 17:59:59 -07:00
Ian Curtis
0ef90899e1
Double buffer the line of sight values. Should allow the correct values to be returned if GPU threading is enabled.
2022-01-02 12:48:09 +00:00
Ian Curtis
75f8ee61a3
fix missing polys with quad renderer
2020-09-14 20:01:52 +00:00
Ian Curtis
38c3ff61f9
Clip scroll fog to viewport, instead of filling entire screen. Fixes fog bug in Daytona credits.
2020-09-08 09:10:24 +00:00
Ian Curtis
aaa26f678c
Update scroll fog logic. Should fix the credits in virtua fighter and daytona that have fogging applied to the background layer and shouldn't.
2020-09-07 16:25:18 +00:00
Ian Curtis
6f6c98c671
The translator map seems to work with paletted colour values too, and the result is not clamped. Colours are passed to the GPU as unsigned bytes to multiplying by 16 will overflow, so we do the logic in the shader. If we passed floats we could skip the shader logic.
2020-05-11 09:05:46 +00:00
Ian Curtis
e2ad593e88
When the translator map is enabled the colour values seem to use 4 bits, 0-16. Why not 0-31 I don't know. Anyway virtua on is overflowing these values for some of the smoke effects. For us the numbers were wrapping around. Clamping is enough to fix this. (Thanks model123)
2020-05-07 19:34:22 +00:00
Ian Curtis
5ace960f14
tweak value so the map indicator still works at the start of spikeout
2020-01-04 18:15:30 +00:00
Ian Curtis
6b8a29105a
Sutherland-Hodgeman clipping only works for planar primitives. Scud is rendering non planar quads and this breaks our algorithm a little when using the quad renderer. Stretching the near plane a few % is enough to fix it.
2020-01-04 13:48:14 +00:00
Ian Curtis
d711afade1
Only need to clip against 4 planes for poly culling
2020-01-04 13:45:55 +00:00
Ian Curtis
06688de5fc
Really should cull against 5 frustum planes.
2019-11-15 20:00:25 +00:00
Ian Curtis
06b43c45b3
Ocean hunter in the middle of the game is passing a few matrices with FLT_MAX inside them, which blows apart our near/far calculation. The hardware must have some method to sanitize the near/far for instance if you render something extremely close to the origin you will also blow apart any near/far calc.
2019-11-02 20:11:48 +00:00
Ian Curtis
714f6a123a
skip invalid culling nodes
2019-07-28 12:14:13 +00:00
Ian Curtis
17f4103123
A culling node must follow immediately after a viewport.
2019-07-26 16:39:58 +00:00
Ian Curtis
8094c2e2b7
Composite the alpha layers at the end of rendering. To do this we need to mask the alpha pixels with the opaque pixels from the next priority layer. Fixes some overlapping shadows in vf3tb that have different priority layers. I assume that was a game bug, but it works on the real h/w.
2019-01-21 14:30:42 +00:00
Ian Curtis
bf4d725970
Smooth texture repeat makes no sense for alpha/contour textures with pixel dilate. HW seems to treat them as non smooth anyway. Also implement some line of sight stuff, used by Scud. Really need to check the threading/synchronisation of the register reads but it basically works.
2018-10-19 20:59:46 +00:00
Ian Curtis
42eaa7f3d8
fix copy paste error :]
2018-10-14 10:05:24 +00:00
Ian Curtis
3eeec35e7c
Correctly emulate the real3d pro-1000 texture modes in our shader.
2018-10-13 13:29:45 +00:00
Ian Curtis
3dbfa73734
Both lemans24 and dirt devils are rendering some totally transparent objects as the first model in each viewport. The HW seems to skip these entirely, and including them breaks our near/far plane calculations leading to Z fighting.
2018-09-19 20:43:41 +00:00
Ian Curtis
e3255e45f3
Tweak the ratio for the near plane. Fixes missing text on the map indicator at the start of spikeout. The vertices are 0.003 units apart so a tonne of precision is required at the near plane to not depth test out.
2018-09-18 21:46:38 +00:00
Ian Curtis
c5b156d95d
remove debug code
2018-09-18 21:20:15 +00:00
Ian Curtis
5dab9910e2
avoid double matrix load
2018-09-16 08:43:13 +00:00
Ian Curtis
b5f9ad9651
Quad rendering engine. Set QuadRendering = 1 in the ini file to use, or -quad-rendering at the end of the command line to use.
2018-09-13 12:50:34 +00:00
Ian Curtis
e4f5f0bcaf
Sega bass fishing is starting some off the meshes with a shared vertex. Without having a previous vertex to share with, the values were just uninitialised and junk. The hardware itself seems to hold the value from the previous mesh, and sega bass fishing relies on this undefined behaviour to function correctly. Storing the cached vertices as member variables instead of locally to the function means it holds the values from the last mesh, and uses those values instead of random garbage.
2018-09-02 21:36:24 +00:00
Ian Curtis
9f5a19a04a
Use correct PCI IDs (Harry Tuttle)
2018-07-09 08:06:06 +00:00
Ian Curtis
f9be1259c0
Opaque polys definitely depth test with less than or equal. Virtua striker is drawing co-planar polys for the bar gfx
2018-06-17 11:30:01 +00:00
Ian Curtis
c7ffd0a808
Draw transparent polys to separate layers and composite at the end. This solves a tonne of transparency errors we had been battling with for a long time. The model3 is strange in the fact it only supports a max of two translucent overlapped polys. They are not blended into the frame normally. Doing this means the topmost translucent polys only are visible in the scene, the equivalent of doing a depth pass first, but without the added cost.
2018-06-16 21:31:29 +00:00
Ian Curtis
f9f43ca66b
2018-05-28 12:55:13 +00:00
Ian Curtis
c1e0e3728b
optimise hash function and parse out transparency layer select bit
2018-05-28 11:59:48 +00:00
Ian Curtis
4d275ba49e
Parse siblings after children. It's the only way to get Daytona water fall to look correct without h/w poly sorting.
2018-05-03 18:37:49 +00:00
Bart Trzynadlowski
3f9b1b76e5
Added a stretch mode (-stretch) and modified new renderer's viewport code (hopefully correctly) to handle aspect ratio correction and widening the way the legacy one does.
2018-05-03 03:46:44 +00:00
Ian Curtis
c6b86c0812
Render the opaque part of texture transparency in the first pass. Fixes numerous transparency related issues in lemans24 and some in ocean hunter. I don't really know if this is the 'correct' way of solving this because the real3d pro-1000 is a complete black box. There is still a lot we don't understand about how it handles transparency.
2018-05-02 20:10:02 +00:00
Ian Curtis
d21e71dced
work around for non working jtag code in star wars
2018-03-21 10:26:05 +00:00
Ian Curtis
8266eecabb
Parse out line of sight position. Only known to be used by scud.
2018-01-15 21:27:21 +00:00
Ian Curtis
22a6166b82
fix Ian's bad maths :)
2018-01-15 13:08:39 +00:00
Ian Curtis
a1350d95a2
Update microtexture coordinate logic (Harry Tuttle)
2018-01-14 12:56:24 +00:00
Ian Curtis
863ea95013
simplify maths
2018-01-10 20:37:21 +00:00
Ian Curtis
adb5196625
comment out unneeded code
2018-01-10 16:12:33 +00:00
Ian Curtis
d708ce9ba2
top/bottom were swapped for off axis projection
2018-01-10 16:08:02 +00:00
Ian Curtis
6efa03112e
Rewrite projection maths based upon previously unknown viewport values. The previous values used roughly worked as the normals for frustum planes. Perhaps they were only used for culling and not actually rendering, as sometimes the values don't work correctly.
2018-01-08 18:35:42 +00:00
Ian Curtis
bc7f1e9fac
Fixed shading also works with untextured polys. Fixes some shading issues in La machineguns. (Harry Tuttle)
2017-11-07 00:15:57 +00:00
Ian Curtis
eb798ed15e
Star wars is the only game to pass unsigned fixed shaded values (per vertex brightness) to the renderer. Originally we thought that the specular flag would turn on unsigned values since it's the only game to set specular with these polys, but this logic turned out to be incorrect. The JTAG interface seems to config the GPU to turn on this functionality. (Harry Tuttle)
2017-10-05 19:15:00 +00:00
Ian Curtis
43cf6b3bbf
update spotlight code (Harry Tuttle)
2017-10-05 18:49:08 +00:00
Bart Trzynadlowski
55bb02d4e5
- New work-in-progress frame timing code (disabled by default, compile with NEW_FRAME_TIMING defined to activate it)
...
- New JTAG emulation, moved into its own class, CJTAG
- Removed game-specific sun clamp hacks from CNew3D (JTAG and Real3D emulation will call the appropriate method to configure this at run-time)
- Removed JTAG from Real3D save state data and reused some of that space for new state variables having to do with the internal JTAG-based config as well as new frame timing state variables
2017-09-24 20:52:48 +00:00
Ian Curtis
2786d95795
add interface for sun clamp
2017-09-02 14:54:16 +00:00
Ian Curtis
266c911133
Optimise vertex data to cut down on unnecessary copying
2017-08-30 21:45:25 +00:00
Ian Curtis
165926aa06
Modern hardware does backface culling in window space by calculating the face normal for the polygon, then doing a dot product against the view vector. The real3d pro-1000 on the other hand passes a pre-calculated face normal for each polygon which is used for culling. We were using this face normal to rewind the polygons so that regular backface culling would work. This worked 99.9% of the time. However this was failing on some models in Virtua Striker. The reason was because the pre-calculated face normals being passed were actually completely different to the actual face normals for the poly (not just inverted like you would expect). This broke our code. The solution was to emulate face culling directly in the vertex shader using the pre-calculated face normals directly. Only minimally tested this but hopefully there are no obvious regressions.
2017-08-29 10:27:29 +00:00
Ian Curtis
b21ed49512
cosmetic
2017-08-21 23:00:29 +00:00
