Bart Trzynadlowski
934941423a
Inconsequential typo
2018-03-26 23:02:30 +00:00
Bart Trzynadlowski
b5f1b7a2fd
Reverted version to 0.3a-WIP. Release version will be updated to 0.4a.
2018-03-26 23:01:18 +00:00
Bart Trzynadlowski
f0ea6b45a8
Added ability to load save state at startup using -load-state or InitStateFile (in config file)
2018-03-26 22:59:06 +00:00
Ian Curtis
d21e71dced
work around for non working jtag code in star wars
2018-03-21 10:26:05 +00:00
Ian Curtis
b184ca3e1b
Clamping must be applied before the spotlight is applied on step 1.0 h/w.
2018-03-10 09:13:28 +00:00
Ian Curtis
609d1ba19f
Fix step 1.0 games with NET_BOARD defined (Spindizzi)
2018-03-08 14:27:28 +00:00
Ian Curtis
d8572a923a
Update network code (Spindizzi)
2018-02-24 15:53:18 +00:00
Ian Curtis
995cf6adb0
white space
2018-01-29 19:33:29 +00:00
Ian Curtis
10cefb7c61
Support both types of lightgun in lost world. 2nd type fixes some missing fx. Thanks to Any for pointing this out. To use the old type change analog_gun1 to gun1 in the xml file.
2018-01-29 19:31:23 +00:00
Ian Curtis
6bc4224154
fix a few compile warnings
2018-01-25 21:07:22 +00:00
Ian Curtis
820f27cea1
A hack to get spikeout to work (uncomment to enable) (Spindizzi)
2018-01-25 20:40:05 +00:00
Ian Curtis
964f08c894
Disable the netboard if EmulateNet=0 (Spindizzi)
2018-01-25 20:38:31 +00:00
Ian Curtis
85a638bc06
remove extra qualifier
2018-01-22 21:10:20 +00:00
Ian Curtis
04758e38b6
Update make files and fix build for the various options (Harry Tuttle)
2018-01-22 21:01:35 +00:00
Ian Curtis
b5bbda67d0
fix header files
2018-01-22 18:27:51 +00:00
Ian Curtis
571d1060ee
Remove using namespace std from the header files ..
2018-01-21 15:09:11 +00:00
Ian Curtis
8266eecabb
Parse out line of sight position. Only known to be used by scud.
2018-01-15 21:27:21 +00:00
Ian Curtis
99b5b9ba1b
make the logic a bit clearer
2018-01-15 14:40:59 +00:00
Ian Curtis
22a6166b82
fix Ian's bad maths :)
2018-01-15 13:08:39 +00:00
Ian Curtis
a1350d95a2
Update microtexture coordinate logic (Harry Tuttle)
2018-01-14 12:56:24 +00:00
Ian Curtis
863ea95013
simplify maths
2018-01-10 20:37:21 +00:00
Ian Curtis
adb5196625
comment out unneeded code
2018-01-10 16:12:33 +00:00
Ian Curtis
d708ce9ba2
top/bottom were swapped for off axis projection
2018-01-10 16:08:02 +00:00
Ian Curtis
6efa03112e
Rewrite projection maths based upon previously unknown viewport values. The previous values used roughly worked as the normals for frustum planes. Perhaps they were only used for culling and not actually rendering, as sometimes the values don't work correctly.
2018-01-08 18:35:42 +00:00
Ian Curtis
cf7850602b
fix build
2018-01-08 00:13:23 +00:00
Ian Curtis
0b6da91cc0
add the rest of the network board code (Spindizzi)
2018-01-07 14:07:59 +00:00
Ian Curtis
dc3048df24
use the correct c++ deleters
2018-01-06 11:19:04 +00:00
Ian Curtis
19e6aab1fa
use a few macros to make debugging less painful
2018-01-06 01:18:14 +00:00
Ian Curtis
314279ed25
Add network board emulation. Currently not linked with the rest of the project.
2018-01-04 19:14:12 +00:00
Ian Curtis
f7678d918e
remove using namespace from headers ..
2018-01-03 17:51:24 +00:00
Ian Curtis
53c98283aa
rename to avoid clash with a #define
2018-01-03 16:19:10 +00:00
Ian Curtis
3ab93cf6ee
add asynchronous sending functions
2018-01-02 18:54:34 +00:00
Ian Curtis
58dc18cd11
remove dead variable
2017-12-29 11:46:38 +00:00
Ian Curtis
78ae00faf1
Add basic networking files to supermodel. Currently these are win32 specific but can port to SDL or whatever later.
2017-12-29 11:42:03 +00:00
Ian Curtis
080acd08c2
Fix the smallest texture lods (Harry Tuttle)
2017-12-21 11:14:06 +00:00
Ian Curtis
a772dd32fc
fix array out of bounds
2017-12-20 18:47:17 +00:00
Ian Curtis
4702fef33e
remove debug code
2017-12-19 11:43:17 +00:00
Ian Curtis
429d6cbb02
mark as static
2017-12-17 23:02:25 +00:00
Ian Curtis
cc28d5f00e
Implement sub 8x8 tile encoding. Fixes incomplete mipmap chains which previously only went down to 8x8 pixels before. It wasn't known these textures existed before. (Harry Tuttle)
2017-12-17 22:25:50 +00:00
Ian Curtis
cede67468c
Fix some bad/missing textures in fighting vipers. The game is referencing totally illegal texture sizes. The real h/w was just handling it somehow, whilst we were returning null for the textures. This might produce junk textures for the lower mipmaps, but this can be clamped in a later update.
2017-12-13 01:21:25 +00:00
Ian Curtis
62d9584b0d
Shift fog maths to fragment shader to fix bug in virtua on.
2017-11-23 17:51:51 +00:00
Ian Curtis
bddc86aba9
The vertex shader is run before clipping is done. If fogging values are calculated and clamped in the vertex shader it can interpolate bad values, since the range has been truncated. This happens if the polys overlap the near plane. The solution to clamp the values in the fragment shader. This fixes a bunch of fogging errors I long thought were transparency related errors in the ocean hunter.
2017-11-20 22:21:15 +00:00
Ian Curtis
bc7f1e9fac
Fixed shading also works with untextured polys. Fixes some shading issues in La machineguns. (Harry Tuttle)
2017-11-07 00:15:57 +00:00
Ian Curtis
df44ad458b
Update step 1.5 luminous logic with Harry's findings. Fixes various shading issues.
2017-11-05 13:25:33 +00:00
Ian Curtis
8e13c3bbb9
Finish the hash function (Harry Tuttle)
2017-10-19 20:48:53 +00:00
Ian Curtis
7f6df0cc84
Remove fixed shading check from specular.
2017-10-07 12:39:30 +00:00
Ian Curtis
eb798ed15e
Star wars is the only game to pass unsigned fixed shaded values (per vertex brightness) to the renderer. Originally we thought that the specular flag would turn on unsigned values since it's the only game to set specular with these polys, but this logic turned out to be incorrect. The JTAG interface seems to config the GPU to turn on this functionality. (Harry Tuttle)
2017-10-05 19:15:00 +00:00
Ian Curtis
43cf6b3bbf
update spotlight code (Harry Tuttle)
2017-10-05 18:49:08 +00:00
Bart Trzynadlowski
2397b8225a
New, saner Makefiles. They still require some customization but share a core Makefile include with auto-generation of dependencies. Multi-threaded building (e.g., make -j6) is supported now.
2017-10-05 02:14:02 +00:00
Ian Curtis
9bac7836ed
add missing header
2017-09-30 19:05:04 +00:00
Bart Trzynadlowski
3ca37089ca
Get rid of unused variable warning
2017-09-27 13:20:09 +00:00
Ian Curtis
0afd9026dc
Fix the sky in one of the levels in virtua on. The problem was caused by the fact we didn't split the mesh by the fog % burn through, so all the polys had the same value. We could use a vertex attrib, but % burn through fog is so rarely used and when it is, normally every poly in the mesh has the same value.
2017-09-26 00:30:08 +00:00
Bart Trzynadlowski
1eac755bc3
Fix tiny memory leak
2017-09-25 00:05:10 +00:00
Ian Curtis
0376f74192
work around for visual studio bug
2017-09-24 22:36:12 +00:00
Ian Curtis
adecec77de
fix missing header
2017-09-24 22:14:39 +00:00
Ian Curtis
7590f50350
cannot specify explicit initializer for arrays - fix for visual studio
2017-09-24 22:03:31 +00:00
Bart Trzynadlowski
55bb02d4e5
- New work-in-progress frame timing code (disabled by default, compile with NEW_FRAME_TIMING defined to activate it)
...
- New JTAG emulation, moved into its own class, CJTAG
- Removed game-specific sun clamp hacks from CNew3D (JTAG and Real3D emulation will call the appropriate method to configure this at run-time)
- Removed JTAG from Real3D save state data and reused some of that space for new state variables having to do with the internal JTAG-based config as well as new frame timing state variables
2017-09-24 20:52:48 +00:00
Bart Trzynadlowski
c4f8471d7a
Added functions to safely read and write bools
2017-09-24 20:49:31 +00:00
Bart Trzynadlowski
1db2f6bb84
Added functions to extract bits as integer values and updated comment about bit vector layout
2017-09-24 18:40:58 +00:00
Bart Trzynadlowski
3041ca1922
Added SetOnes() and SetZeros()
2017-09-23 16:08:27 +00:00
Bart Trzynadlowski
c3eef706e8
Safe guard against shifting empty register.
2017-09-23 15:40:20 +00:00
Bart Trzynadlowski
98b0354dd6
Hex formatting support extended to 64 bits.
2017-09-23 15:33:26 +00:00
Bart Trzynadlowski
61a0517bd9
Added ShiftOutLeft() and ShiftOutRight()
2017-09-23 15:03:06 +00:00
Bart Trzynadlowski
7a2e6b393a
Renamed shift in/out functions to add/remove to be less ambiguous about their functionality
2017-09-23 14:42:05 +00:00
Bart Trzynadlowski
86631695d7
Added ToHexString() and made ostream serialization use this
2017-09-19 19:43:06 +00:00
Bart Trzynadlowski
e12a945ddd
Fix for VS2015 and newer by MetalliC
2017-09-18 04:24:23 +00:00
Bart Trzynadlowski
f2030ac125
Added BitRegister class (for use in upcoming JTAG refactor): an inefficient but flexible container for manipulating a dynamic bit stream.
2017-09-07 19:33:25 +00:00
Ian Curtis
a3e2fb7906
Calculating the length of the vertex results in quite broken values for fogging when the vertices are traversing the view frustum. The hardware also wouldn't have been doing a square root per vertex for fogging. Simply using the z values is enough. Todo check clamping of values for the near/far planes.
2017-09-06 13:07:39 +00:00
Ian Curtis
2786d95795
add interface for sun clamp
2017-09-02 14:54:16 +00:00
Ian Curtis
266c911133
Optimise vertex data to cut down on unnecessary copying
2017-08-30 21:45:25 +00:00
Ian Curtis
165926aa06
Modern hardware does backface culling in window space by calculating the face normal for the polygon, then doing a dot product against the view vector. The real3d pro-1000 on the other hand passes a pre-calculated face normal for each polygon which is used for culling. We were using this face normal to rewind the polygons so that regular backface culling would work. This worked 99.9% of the time. However this was failing on some models in Virtua Striker. The reason was because the pre-calculated face normals being passed were actually completely different to the actual face normals for the poly (not just inverted like you would expect). This broke our code. The solution was to emulate face culling directly in the vertex shader using the pre-calculated face normals directly. Only minimally tested this but hopefully there are no obvious regressions.
2017-08-29 10:27:29 +00:00
Bart Trzynadlowski
f04a285727
DMA and register space access for Real3D have been unified and CReal3D::ReadRegister() returns little endian data now that the PowerPC handler byte-swaps back, to be consistent with how DMA registers work.
2017-08-29 01:28:21 +00:00
Ian Curtis
50d1f95648
Changed fixed shaded logic for step 1.5 hw based upon Harry's findings
2017-08-25 22:40:39 +00:00
Ian Curtis
b21ed49512
cosmetic
2017-08-21 23:00:29 +00:00
Ian Curtis
cd5978773a
Harry made some important discoveries with regards to fixed shading on the model 3 (per vertex poly brightness values). Firstly values are allowed to be negative, and they are used as a drop in replacement in the standard lighting equation for the normal dot light vector. This quite radically changes the brightness in LA Machine guns, but now correctly matches the arcade.
2017-08-19 20:06:31 +00:00
Bart Trzynadlowski
507990a350
Fixed up memory region dumping code to use the new Util::FlipEndian functions
2017-08-19 19:27:58 +00:00
Bart Trzynadlowski
21f813ad3e
Fixed a bug in MCRFS instruction related to the VXSOFT, VXSQRT, and VXCVI bits. Thanks to Spindizzi.
2017-08-16 00:58:39 +00:00
Ian Curtis
0efd4dac39
Finish fixed shading for 2.0 hardware. I'm pretty sure it actually works identically to step 1.5 hardware. The oddball is LA machine guns where the viewport ambient doesn't seem to effect the brightness. But the ambient works differently in this game because it uses the unclamped light model. Still need to investigate if the diffuse factor effects fixed shading.
2017-08-15 23:21:57 +00:00
Ian Curtis
b1cc9a615d
With fixed shading, when lighting is disabled, fixed shading appears to be a flat shaded version based upon the poly colour, instead of per vertex attributes.
2017-08-15 20:50:36 +00:00
Ian Curtis
2422caadc6
Pad struct and align on 4 byte boundary.
2017-08-15 20:45:08 +00:00
Ian Curtis
eac76f0908
simplify
2017-08-14 23:30:34 +00:00
Ian Curtis
81188bee07
fixed shading doesn't effect the alpha channel
2017-08-14 16:10:26 +00:00
Ian Curtis
c12e4c3215
Fixed shading (per vertex poly colours) on step 1.5 hardware have the viewport ambient value added to them. This fixes various shading on scud. To do this had to switch the maths to the vertex shader.
2017-08-14 09:14:06 +00:00
Ian Curtis
8f622714a7
Fix attribute locations. glBindAttribLocation must be called linking
2017-08-11 11:59:41 +00:00
Bart Trzynadlowski
a315627401
Added support for loading shaders from files for new engine and tile renderer. Changed help text to reflect new engine being default.
2017-08-11 00:41:10 +00:00
Ian Curtis
7dc1eac614
make the new3d engine default :] Legacy engine can still be selected using -legacy3d in the command line
2017-08-10 15:59:16 +00:00
Ian Curtis
d7403afda6
use generic vertex attributes
2017-08-10 15:43:03 +00:00
Ian Curtis
57d0a513fd
Technically matrix casts are only allowed in glsl 1.2 and later
2017-08-09 23:25:01 +00:00
Ian Curtis
063b7d3ea4
Remove debug code
2017-08-09 21:40:48 +00:00
Ian Curtis
5709ee2659
Sometime ago I managed to work out that specular on the model3 is not real specular, and really is just an extension of diffuse lighting. But attempts were derailed by corner cases and the fact we were not handling the normals correctly. Anyway Harry managed to successfully come up with an algorithm, and coefficients that give an almost perfect match to specular on the model3, based soley on observations from video footage! He also worked out that the lighting on hardware 1.5 onwards appears to be unclamped (ie greater than 1). This quite radically changes the brightness of some of the games, but much better matches the original hardware.
2017-08-09 16:56:56 +00:00
Ian Curtis
1d338877fc
cosmetic
2017-08-03 11:05:04 +00:00
Ian Curtis
3fc28159eb
Add the unclamped light model we know exists to the shaders.
2017-08-03 10:41:18 +00:00
Ian Curtis
b1bd877b82
Ski champ for some reason is passing denormalised numbers for the modelscale. This is causing a NaN in our shader killing the lighting for these models, so we simply skip these, since they are essentially zero anyway. Thanks to Harry for finding this bug :)
2017-08-01 23:48:53 +00:00
Ian Curtis
9aa3f13777
We were force normalising the result of matrix * normal, which looked correct in most cases. But this didn't preserve the scaling of the matrix, or the scaling of the model normals which resulted in many over bright areas. On it's own this generally worked, but games like Star Wars looked quite broken. Harry correctly figured out if you scale these normals by the scaling value that is sometimes present in the culling nodes the lighting looks correct. Still more work to do to correctly figure out the model3's lighting model.
2017-07-29 16:30:30 +00:00
Ian Curtis
a9b49c1676
Implement unclamped light model based upon Harry's findings. Unknown how this is turned on/off.
2017-07-22 17:15:14 +00:00
Ian Curtis
2335f3173b
Use c++11 raw string literals
2017-07-08 10:55:14 +00:00
Ian Curtis
3efb055344
Clamp the ambient light to a max of 0.75. LA Machine guns seems to use an ambient value of 1, which is full bright for everything. But for some reason the hardware seems to treat this as ~ 0.75. This fixes various missing shading in the game. This doesn't seem to have any negative effects on other games I have tested. Clamping in the shader as we might need the full range of values for fixed shading.
2017-06-29 19:05:30 +00:00
Ian Curtis
9e9a549283
remove WIP code
2017-06-25 20:09:45 +00:00
Ian Curtis
ec3872d108
convert sun angle coordinate system outside of the shader
2017-06-25 19:50:02 +00:00
Ian Curtis
97781108e8
A second go at fixing the fixed lighting in star wars .. Fixed shading is per vertex poly colours. For some reason in star wars they are treated as unsigned values instead of signed, like in every other game. These polys are all marked with specular enabled, where as in the rest of the games they are missing this flag. That's the only difference I can find.
2017-06-21 17:04:53 +00:00
