Ian Curtis
|
7694e4eb0c
|
minor culling node optimisations
|
2017-04-25 00:10:55 +00:00 |
|
|
Ian Curtis
|
ff936c588b
|
don't need cast, conversion is implicit
|
2017-04-20 19:46:40 +00:00 |
|
|
Ian Curtis
|
912bb0e7cf
|
better state handling
|
2017-04-20 19:43:41 +00:00 |
|
|
Ian Curtis
|
9b226ed478
|
parse out some culling node values
|
2017-04-17 10:40:07 +00:00 |
|
|
Ian Curtis
|
3c78571615
|
There are 2 bits in the polyheader labelled discard. When both are set ie in sega rally, the polygons are totally discarded. Scud seems to set bit 1 which seems halve the opacity.
|
2017-04-15 19:00:46 +00:00 |
|
|
Ian Curtis
|
21836c088c
|
The real3d has a flag that allows the hw to skip polygons so that they aren't rendered. Sega rally2 uses this for the dust effects. Triangles or quads that have this flag are junk, and look like random corruption if you try to draw them. We assumed polys that shared vertices with these bad polygons were also bad. It turns out the last few shared vertices in these polys were in fact valid, and thus the entire quad/triangle strip should be drawn and not discarded.
|
2017-04-14 23:41:11 +00:00 |
|
|
Ian Curtis
|
fc50bdee98
|
light parameters must be clamped (HarryTuttle)
|
2017-04-14 00:08:17 +00:00 |
|
|
Ian Curtis
|
391aafd4c1
|
Virtua fighter has a few massive polys that shouldn't be visible. It looks like these polys have a bad matrix, but the node distances are all zero. This means the bounding box that encapsulates them is of size zero. Skipping over these entirely seems to fix the issue.
|
2017-04-12 15:47:57 +00:00 |
|
|
Bart Trzynadlowski
|
4a70d5ec9a
|
Updated Util::Config::Node unit tests with multiple leaf node test
|
2017-04-12 02:41:02 +00:00 |
|
|
Ian Curtis
|
e462fbeda0
|
remove unused variable
|
2017-04-11 11:11:45 +00:00 |
|
|
Bart Trzynadlowski
|
76817790d4
|
Extended -gfx-state to produce culling node analysis
|
2017-04-11 07:03:47 +00:00 |
|
|
Bart Trzynadlowski
|
9dd2b24729
|
Fixed behavior of Util::Config::Node when adding nested nodes (only leaf level can be duplicated; e.g., foo/bar and foo/bar will create one foo with two bar children, rather than two foo each with one bar).
|
2017-04-11 07:03:10 +00:00 |
|
|
Bart Trzynadlowski
|
901b8c3fa4
|
Spindizzi's SCSP DSP fix for the VF3TB cave stage
|
2017-04-09 15:27:43 +00:00 |
|
|
Bart Trzynadlowski
|
9989eae8aa
|
Hooked up the command line help options (thanks, Spindizzi!) and updated copyright info
|
2017-04-09 15:08:02 +00:00 |
|
|
Ian Curtis
|
06cb5708e3
|
add missing include
|
2017-04-08 21:01:11 +00:00 |
|
|
Bart Trzynadlowski
|
a649a0d36b
|
Removed patches from source code and moved them into game XML file. Created ROMSet.cpp. Print a more descriptive error when game XML file fails to load.
|
2017-04-08 18:30:29 +00:00 |
|
|
Bart Trzynadlowski
|
86ffda66d8
|
Updated help text to include -game-xml-file option
|
2017-04-08 18:28:49 +00:00 |
|
|
Ian Curtis
|
788a480ff3
|
add missing include
|
2017-04-07 15:47:36 +00:00 |
|
|
Bart Trzynadlowski
|
006260be47
|
Harry Tuttle's fixes to fishing controls: invert fishing rod y and fishing stick y axis values so setting a negative axis is not necessary. Also changed reel to an analog input (similar to a pedal), whose neutral position is 0.
|
2017-04-07 04:42:04 +00:00 |
|
|
Bart Trzynadlowski
|
4ca7d5ef0e
|
Harry Tuttle's change to Harley gear shift to use a single bit instead of two (no detectable difference in behavior, though)
|
2017-04-07 04:30:27 +00:00 |
|
|
Bart Trzynadlowski
|
205282a758
|
Removed unused file: Game.cpp
|
2017-04-06 03:23:32 +00:00 |
|
|
Ian Curtis
|
101e43213e
|
cosmetic
|
2017-04-05 19:32:01 +00:00 |
|
|
Ian Curtis
|
edfb521a9b
|
Daytona seems to use this completely undocumented feature of the real3d pro-1000, the ability to invert texture colours. This patch fixes the colours on the cars, and the signs which should flash by alternating their colours.
|
2017-04-05 17:57:38 +00:00 |
|
|
Bart Trzynadlowski
|
cc32e0bf8e
|
Removed last vestiges of CINIFile from input system and removed Games.cpp, INIFile.cpp, and ROMLoad.cpp
|
2017-04-05 16:19:08 +00:00 |
|
|
Bart Trzynadlowski
|
df283d9aa3
|
Using Game::INPUT_* instead of obsolete GAME_INPUT_*
|
2017-04-05 16:17:57 +00:00 |
|
|
Bart Trzynadlowski
|
c013eab711
|
Changes by Harry Tuttle: game list more accurately reflects MAME's, added a root level XML "games" node, print ROM version along with title
|
2017-04-05 05:35:45 +00:00 |
|
|
Bart Trzynadlowski
|
f6707ecfba
|
Fixed graphics state analyzer
|
2017-04-04 23:28:06 +00:00 |
|
|
Bart Trzynadlowski
|
c4bf565a1a
|
Added cstring
|
2017-04-04 23:27:39 +00:00 |
|
|
Ian Curtis
|
4ebcf5865a
|
more whitespace ..
|
2017-04-03 12:02:49 +00:00 |
|
|
Ian Curtis
|
a141635be6
|
white space ..
|
2017-04-03 12:01:37 +00:00 |
|
|
Ian Curtis
|
c617a453fa
|
Cache dereferenced values. Cuts loading time from 15 to 5 seconds in debug mode :)
|
2017-04-03 12:00:25 +00:00 |
|
|
Bart Trzynadlowski
|
5aafbbf936
|
Included cstring for memcpy
|
2017-04-03 05:34:23 +00:00 |
|
|
Bart Trzynadlowski
|
2aa9dc7967
|
Rewrote large parts of ROM loading code to more gracefully handle merged sets where overwritten parent ROMs are not present. Better handling of multiple zip files. Optimized ROM loading when stride and chunk size are equal and got rid of safety checks that I don't believe are necessary any longer.
|
2017-04-03 01:03:38 +00:00 |
|
|
Ian Curtis
|
f0e00c5dc7
|
Rewrite the spot light code, and implement the missing fog logic. (HarryTuttle)
|
2017-04-02 21:03:59 +00:00 |
|
|
Bart Trzynadlowski
|
07660be0df
|
Fixed missing file detection (set_difference requires inputs sorted by desired key) and improved error reporting
|
2017-04-01 05:08:50 +00:00 |
|
|
Bart Trzynadlowski
|
68ebf35aac
|
Removed TODO comment
|
2017-03-31 05:23:34 +00:00 |
|
|
Bart Trzynadlowski
|
b0957e6459
|
Smarter game selection when a zip file contains multiple games (prefer child when parent is also present in zip)
|
2017-03-31 05:23:04 +00:00 |
|
|
Bart Trzynadlowski
|
e40d268214
|
Warn about parent ROM sets having parent defined (not allowed)
|
2017-03-31 04:44:45 +00:00 |
|
|
Bart Trzynadlowski
|
47ce132292
|
Print missing files from games
|
2017-03-31 04:27:09 +00:00 |
|
|
Bart Trzynadlowski
|
fd0f7ec6d1
|
Support loading of parent ROM sets (e.g., scudp will load scud)
|
2017-03-30 06:17:34 +00:00 |
|
|
Ian Curtis
|
cd1a551e4b
|
compile fixes
|
2017-03-28 22:28:46 +00:00 |
|
|
Ian Curtis
|
1a766843b5
|
MSYS2 compile fix (HarryTuttle)
|
2017-03-28 21:02:14 +00:00 |
|
|
Ian Curtis
|
69eac95846
|
Replace glsl 3 function. Apparently this doesn't work on OS X.
|
2017-03-28 20:24:44 +00:00 |
|
|
Ian Curtis
|
70259eec34
|
fix compile warnings
|
2017-03-28 19:33:16 +00:00 |
|
|
Bart Trzynadlowski
|
318f4cf6dc
|
Sort games found in zip file by descending order of matching files so that game with the *most* matching files is picked
|
2017-03-28 04:03:38 +00:00 |
|
|
Ian Curtis
|
ddbf08ac73
|
don't ask
|
2017-03-27 22:06:23 +00:00 |
|
|
Ian Curtis
|
f320af2049
|
fix project files
|
2017-03-27 22:01:31 +00:00 |
|
|
Ian Curtis
|
3fefff36c2
|
fix multiple default constructors
|
2017-03-27 18:15:15 +00:00 |
|
|
Ian Curtis
|
5c15dac16f
|
add missing include
|
2017-03-27 14:14:36 +00:00 |
|
|
Bart Trzynadlowski
|
f34e25dfc7
|
Massive internal change: removed CConfig object and replaced it with a hierarchical config object system (Util::Config::Node). Games are now defined in an XML file. Hopefully I didn't break too many things :/
|
2017-03-27 03:19:15 +00:00 |
|
|
Bart Trzynadlowski
|
26a4417a5f
|
Cosmetic: renamed step to stepping
|
2017-03-27 03:13:34 +00:00 |
|
|
Bart Trzynadlowski
|
10befe4938
|
No need to enclose values in quotes when writing INI file. Print that file was saved to console and log.
|
2017-03-27 03:10:36 +00:00 |
|
|
Bart Trzynadlowski
|
35d9842dd8
|
Added a TODO list
|
2017-03-27 03:09:24 +00:00 |
|
|
Bart Trzynadlowski
|
c4a63821c3
|
Encapsulated zip file handling and added a "parent" member to the Game struct
|
2017-03-27 02:02:22 +00:00 |
|
|
Bart Trzynadlowski
|
ba3a0b5e2a
|
Checking in GameLoader.cpp, GameLoader.h, and ROMSet.h (not currently used in build) because I need to make a substantial modification in my local tree
|
2017-03-26 16:38:55 +00:00 |
|
|
Ian Curtis
|
ff624afb4d
|
The mipmap data in some games seems to being sent behind the base textures, and when the base textures are bound and created the mipmap chain is not yet valid in memory. To fix this, we invalidate the base textures, when the mipmap chain is updated.
|
2017-03-25 00:06:24 +00:00 |
|
|
Ian Curtis
|
06c1cdcf94
|
Just use 1 hash map for the textures, instead of 1 for each format. Should greatly speed up texture invalidation. TODO invalidate texture mipmaps .. the h/w actually seems to stream the mipmap data separate from the base textures in some cases.
|
2017-03-24 20:54:12 +00:00 |
|
|
Ian Curtis
|
98d56ff011
|
cosmetic
|
2017-03-24 17:43:07 +00:00 |
|
|
Ian Curtis
|
82ac030dff
|
calculate the correct number of mipmap textures
|
2017-03-24 16:51:52 +00:00 |
|
|
Ian Curtis
|
17f878421b
|
Originally to do mipmapping, I just used the base texture and then let the h/w automatically generate the mipmap chain. I wasn't sure the real3d api even exposed to the programmer the ability to directly set the mipmap data. Anyway, as pointed out by HarryTuttle scud actually uses darker mipmaps for an effect on the water. This patch uses the uses the actual mipmap data from the real3d memory. Only tested scud, so hopefully I didn't cause any cataclysmic errors :)
|
2017-03-24 13:38:20 +00:00 |
|
|
Ian Curtis
|
17f7c2d9f6
|
use 32bit types
|
2017-03-23 17:18:33 +00:00 |
|
|
Bart Trzynadlowski
|
61159c07f8
|
Added 8- and 16-bit tilegen VRAM access handlers to fix missing columns in Star Wars Trilogy tilemaps. Thanks to Spindizzi for initial confirmation that this was the problem.
|
2017-03-23 04:22:25 +00:00 |
|
|
Ian Curtis
|
9fb6acc92d
|
fix scissor code for native resolution (thanks HarryTuttle)
|
2017-03-22 20:38:44 +00:00 |
|
|
Ian Curtis
|
519cce34f5
|
remove debug code
|
2017-03-19 09:54:51 +00:00 |
|
|
Ian Curtis
|
9780f333b4
|
The model3 has this weird issue where the 2d and 3d planes are misaligned by 2 pixels. Originally I made a quick hack that shifted subviewports 2 pixels. But apparently that wasn't enough, as the issue effects everything. Thanks to HarryTuttle for pointing this out, and making a patch :)
|
2017-03-19 01:33:45 +00:00 |
|
|
Ian Curtis
|
b19ceb0b6a
|
Texture coordinates seem to be scaled relative to the fixed texture size of 256. Thanks to HarryTurtle for figuring this crazy logic out. The road in scud matches the arcade now almost perfectly.
|
2017-03-13 00:59:35 +00:00 |
|
|
Ian Curtis
|
dcd018ab7e
|
Change microtexture scaling values. Seem to much better match expected output. (thanks HarryTuttle)
|
2017-03-12 19:00:00 +00:00 |
|
|
Ian Curtis
|
732e3ef51f
|
More fixes to microtexture coordinates. They go vertically up and down the texture sheet, and not horizontally as I had guessed. (Thanks HarryTurtle)
|
2017-03-11 12:55:47 +00:00 |
|
|
Ian Curtis
|
6636776f03
|
Fix microtexture texture coordinates (thanks HarryTuttle)
|
2017-03-11 01:18:43 +00:00 |
|
|
Ian Curtis
|
503c88df11
|
fix the bad projection matrix in dirt devils and lost world
|
2017-03-07 01:29:07 +00:00 |
|
|
Ian Curtis
|
f173c3c3ce
|
The hardware actually seems to treat the quad primitive as a triangle strip. The winding order can actually change between the first and second 'triangle' inside the quad, leading our code to incorrectly backface cull the 2nd triangle. So we must re-calculate the winding order for the 2nd triangle. This fixes a massive missing poly in the road in la machine guns, probably other games too. The hardware is unaffected by the winding order, as it doesn't calculate the poly normal from the vertices directly, instead it uses the provided normal in the poly header.
|
2017-02-21 23:35:40 +00:00 |
|
|
Ian Curtis
|
5b9741bd5d
|
Support high priority polygons. They are treated as a separate overlay plane by the h/w. Fixes some missing fx in harley.
|
2017-02-20 17:22:32 +00:00 |
|
|
Ian Curtis
|
2ae2010ee4
|
Add high priority poly function. Used by harley.
|
2017-02-18 23:58:08 +00:00 |
|
|
Ian Curtis
|
4a116190b5
|
When the translator map?? bit is enabled the colour format seems to be 4-5bit. Max observed value is 16. Scaling these values up seems to produce the correct colours in harley and dirt devils.
|
2017-02-16 17:20:42 +00:00 |
|
|
Ian Curtis
|
7407d03036
|
Put a check in there, in case near values come out really close to zero. Fixes a slight corner case in lemans24. A check probably should have been there originally :)
|
2017-02-08 16:14:50 +00:00 |
|
|
Ian Curtis
|
24cbeed526
|
Dynamically calculate near/far frustum planes for each viewport priority layer by clipping the overlapping meshes with the 4 frustum planes. A bit brute forcy, but the results are great.
|
2017-02-07 14:05:03 +00:00 |
|
|
Ian Curtis
|
144125a62e
|
mark the nodes without valid distances set
|
2017-02-05 15:36:05 +00:00 |
|
|
Ian Curtis
|
c82dc55485
|
cosmetics
|
2016-12-22 22:11:19 +00:00 |
|
|
Ian Curtis
|
72dd0dbf98
|
only need to cull against 4 clipping planes
|
2016-12-22 22:09:13 +00:00 |
|
|
Ian Curtis
|
20a9514aa2
|
For scroll fog set the viewport to the entire area, allows fog to work in widescreen mode
|
2016-12-15 19:27:08 +00:00 |
|
|
Ian Curtis
|
ca7046729e
|
properly cache un-normalised texture coordinates, fixes a texturing regression in Daytona
|
2016-12-15 12:10:52 +00:00 |
|
|
Ian Curtis
|
f355e2d062
|
fix microtexture colours
|
2016-12-15 00:45:32 +00:00 |
|
|
Ian Curtis
|
89e75a9803
|
Only check scroll fog value from the first viewport from each priority layer. Seems to fix problems with background fogging.
|
2016-12-14 19:57:05 +00:00 |
|
|
Ian Curtis
|
707e945db9
|
delete unused files
|
2016-12-09 14:15:11 +00:00 |
|
|
Ian Curtis
|
2c23268d88
|
Support microtexture relative scale. The exact scaling values are not known, but a 2x difference between each level seems highly likely. We know from visual inspection from scud that the first level is exactly 4. The SDK has a function that accepts a float input for scale and does this. lod = (1/scale) + 0.5. If lod>3 lod = 3. So this is our best guess.
|
2016-12-09 14:13:46 +00:00 |
|
|
Ian Curtis
|
da8b63b44b
|
The model3 shares vertices between polygons. But it also seems to do this for polygons with different textures. This means the texture coordinate for potentially different sizes textures is shared. Currently this was broken leading to some corrupted looking textures. The fix is to simply cache the old texture coordinates, and recalculate the normalised coordinates in the new texture coordinate space.
|
2016-12-06 14:39:46 +00:00 |
|
|
Ian Curtis
|
10a5d2c0e1
|
refactor
|
2016-12-06 12:25:34 +00:00 |
|
|
Ian Curtis
|
eece2d75b4
|
tweak scroll fog logic
|
2016-12-04 22:37:49 +00:00 |
|
|
Ian Curtis
|
adbebb0204
|
clean up
|
2016-12-04 22:37:22 +00:00 |
|
|
Ian Curtis
|
a310e8e5cf
|
minor optimisations
|
2016-11-28 17:32:25 +00:00 |
|
|
Ian Curtis
|
abc8c24b69
|
Only check the geometry for culling with valid node distances. We will need this later.
|
2016-11-27 19:30:46 +00:00 |
|
|
Ian Curtis
|
fe60d115d2
|
Revert changes .. if we clip against the real3d clipping planes, our wide screen hack won't work anymore.
|
2016-11-26 01:19:51 +00:00 |
|
|
Ian Curtis
|
665fa90425
|
Get clipping planes directly from the viewport data. Also no need to clip against a far plane
|
2016-11-26 01:12:08 +00:00 |
|
|
Ian Curtis
|
54c405709f
|
Need to walk back in memory and check the previous texture tiles to see if they overlap with the current textures being invalidated. If they overlap they must be cleared too. Algorithm is a bit brute forcy and more expensive than I'd like but it fixes the bad textures in Spikeout.
|
2016-11-22 20:30:10 +00:00 |
|
|
Ian Curtis
|
84ae8f035c
|
Skip processing the mipmap section of memory. The real3d doesn't create mipmaps down to 1x1 that is needed to do mipmapping properly on modern hardware anyway.
|
2016-11-21 09:04:56 +00:00 |
|
|
Ian Curtis
|
2ddc8a30e0
|
Clear queued texture uploads after processing them. Saves re-uploading the same textures whilst paused
|
2016-11-20 17:02:59 +00:00 |
|
|
Ian Curtis
|
10dd530cde
|
More accurate 2D colours. White should map to 255 not 248
|
2016-11-15 12:44:47 +00:00 |
|
|
Ian Curtis
|
483ba2f398
|
Fix the shading in scud. When lighting is disabled the fixed shading intensities appear to be offset values added to the colour value.
|
2016-11-11 17:50:27 +00:00 |
|
|
Ian Curtis
|
0a7c0d0864
|
change throttle logic for smoother playback, we could get closer to 60fps if SDL timers weren't so lame
|
2016-10-21 00:04:12 +00:00 |
|
|
Ian Curtis
|
2f49012786
|
change scroll fog logic to parse the lower priority viewports first
|
2016-10-09 18:10:57 +00:00 |
|