toxieainc
d4633a868d
Revert "port some changes from MAME/MESS"
...
This reverts commit b5f3d8b68e1ae62a08b00a730b6b8150758c0af3.
2022-08-09 20:37:42 -07:00
toxieainc
03002d3f22
port some changes from MAME/MESS
2022-08-09 20:37:42 -07:00
toxieainc
2df681f009
equivalent optimizations, NFC
2022-08-09 20:37:42 -07:00
toxieainc
cb9d73c9d0
port some (simple) changes from MAME/MESS
2022-08-09 20:37:42 -07:00
toxieainc
27e071dafb
add comment
2022-07-18 21:43:13 +02:00
toxieainc
dda48d7606
address review
2022-07-17 20:29:25 +02:00
toxieainc
24173a2140
revert "" -> std::string()
2022-07-17 20:25:51 +02:00
toxieainc
c42a2d8951
check for __GNUC__ instead of just assuming it
2022-07-17 20:23:11 +02:00
toxieainc
abb1273aa0
slightly optimize DrawTileLine (less branches/logic)
2022-07-11 18:49:02 +02:00
toxieainc
b98be0c2e7
optimize ReadRegister, as localtime (at least on MSVC/Windows) is significantly showing up in profiling
...
e.g. in SW Trilogy
caches localtime until time changes (i.e. limits calls to 1/sec)
2022-07-11 18:47:13 +02:00
toxieainc
ba7145df52
use intrinsics for endian swap
2022-07-11 18:42:15 +02:00
toxieainc
b2b8396947
missed 2 changed files with last commit
2022-07-11 18:27:44 +02:00
toxieainc
4961951a89
fix a real error (m68kdasm) and some harmless performance warnings and use modern headers
2022-07-11 18:10:41 +02:00
toxieainc
e0053b3a46
fix some real errors (Model3,InputSystem), minor errors (SCSP,SDL/Main) and some performance warnings
2022-07-11 17:43:59 +02:00
Bart Trzynadlowski
8c8cc3d32b
Preparing for Git snapshot build bot and updated copyright header to reference full lifespan of Supermodel repo
2022-06-23 12:34:02 -07:00
Ian Curtis
a742a73772
njz3: Fix sound volume with new quadrophonic audio code
2022-06-19 16:15:54 +00:00
Ian Curtis
e3bc56c8f1
values must be signed, to handle negative numbers, my bad
2022-06-14 21:24:43 +00:00
Ian Curtis
78eab65749
minor fix
2022-06-14 18:14:06 +00:00
Bart Trzynadlowski
7be381c9ba
Added configurable refresh rate. Default is 60 but -true-hz on the command line enables 57.524 Hz mode, which some players report making Spikeout and the timing of combos in VF3 more authentic. The config key is RefreshRate and is specified as a floating point value. Should the desire arise, arbitrary refresh rates can be set in Supermodel.ini using this key but almost no validation of the value is performed. Thanks to forum user trap15 for the original code and PonMi for advocating for this patch to be included.
2022-06-12 17:51:57 +00:00
Ian Curtis
83e7b5f45d
njz3: Proper quadrophonic audio support. Need 4+ speakers to take advantage otherwise down mixed to stereo.
2022-06-09 21:10:39 +00:00
Bart Trzynadlowski
5e61e2f388
Added default values for PortIn, PortOut, and AddressOut
2022-03-31 23:09:32 +00:00
Ian Curtis
84ae9df665
fix: explicit specialization requires 'template <>'
2022-02-06 17:32:44 +00:00
Bart Trzynadlowski
fe7baa108f
Bitmap size field in the BITMAPV4HEADER was not being set correctly (the image viewers I've been using are unaffected by this but it ought to be corrected)
2022-02-05 06:44:53 +00:00
Bart Trzynadlowski
3f6937e1a6
When dumping textures, two T1RGB5 texture maps are written: with and without contour processing. Contour processing can be disabled per-polygon and some textures intended to be used without contour processing contain pixels with T=1 that are clearly not supposed to be transparent. We now output textures_t1rgb5_contour.bmp and textures_t1rgb5_opaque.bmp.
2022-02-05 00:52:34 +00:00
Bart Trzynadlowski
32933ef9b0
Added a -dump-textures option (config key DumpTextures) that writes texture BMP files, one for each known format (12 in all currently)
2022-02-01 23:15:06 +00:00
Matthew Daniels
646b46fd4b
Adjust the number of PowerPC cycles executed per frame to assume 57.524 Hz refresh rate
...
Fighting Vipers 2 attract mode no longer requires 100+ MHz to run smoothly
Supermodel itself still runs at 60 Hz
2022-01-23 15:32:53 +00:00
Ian Curtis
0ef90899e1
Double buffer the line of sight values. Should allow the correct values to be returned if GPU threading is enabled.
2022-01-02 12:48:09 +00:00
Ian Curtis
bc774ca10e
methods should be marked as noexcept because they cannot throw
2021-12-19 17:48:38 +00:00
Ian Curtis
b8aac0a4f8
white space.
2021-12-17 23:58:20 +00:00
Ian Curtis
6f7130c50b
Better document real3d registers
2021-12-17 23:57:12 +00:00
Matthew Daniels
6ff099b5ba
Clear all Real3D DMA registers on reset; uninitialized values were causing issues with MSVC debug builds
2021-12-17 23:36:54 +00:00
Matthew Daniels
3e9c887277
Another header include fix
2021-12-15 14:47:41 +00:00
Matthew Daniels
94772ae3d9
Include required header files in Model3GraphicsState.h - fixes potential build errors in GCC
2021-12-15 13:55:27 +00:00
Matthew Daniels
0c47ac831a
Increase MIDI FIFO buffer size for SCSP; should prevent FIFO overflows
...
Also use similar macro for DSB FIFO buffer
2021-11-30 23:01:37 +00:00
Matthew Daniels
e93c5d710f
PowerPC IRQ line deassertion; DMA only fires interrupts when required
...
PowerPC no longer clears its own IRQ line; it is now cleared by the IRQ controller when there are no more pending interrupts. Not all games clear DMA interrupts so it was necessary to tweak the 53C810 SCSI controller and the Real3D DMA interface to only fire interrupts if a certain register is correctly set. 53C810 has the documented DIEN (DMA Interrupt Enable) register; Real3D DMA seems to use the low bit of the dmaConfig register.
Also I removed the net IRQ as no games seem to actually use it.
2021-11-28 01:11:11 +00:00
Matthew Daniels
9ffce8b92a
Getting rid of most of the includes from Supermodel.h; each file now explicitly includes the header files it needs.
...
Making changes to a header file should no longer force the entire project to recompile.
2021-11-22 17:15:06 +00:00
Matthew Daniels
50465f9a5a
Shared RAM on simulated netboard is now double-buffered; Spikeout Final Edition no longer requires a hack to work.
...
Preparing to enable simulated netboard to run in its own thread
2021-11-05 00:23:29 +00:00
Matthew Daniels
b62110617b
New JTAG patch for Sega Rally 2; linked mode now fully working.
...
Few other minor changes
2021-10-30 23:00:49 +00:00
Matthew Daniels
94d8a1b22d
Increase size of DSB2 FIFO buffer; fixes Sega Rally 2 music occasionally not switching or fading out
2021-10-26 22:47:24 +00:00
Matthew Daniels
b18f6d1b54
Non-linked games no longer falsely list the net board under extra hardware
2021-05-09 23:22:18 +00:00
Matthew Daniels
b7755c9ae1
Fix 16-bit variables not displaying correctly in Z80 debugger (at least in MSVC builds)
2021-05-09 18:12:40 +00:00
Matthew Daniels
a20366d338
Fix netboard resets and detection of simulated netboard linking to itself
2021-04-19 22:15:50 +00:00
Matthew Daniels
5a570ce7fe
Adding simulated netboard; all linked games except Sega Rally 2 working at full speed.
2021-04-14 01:20:45 +00:00
Matthew Daniels
98d4f1c6f6
Corrected alignment issues with netboard RAM; send/receive parameters no longer need to be manipulated to work correctly. Fixes bugs including Scud Race linked car orientation.
2021-03-22 01:08:45 +00:00
Ian Curtis
4b9221ecd6
Add some async network methods. Async send copies to an internal buffer and sends in another thread so doesn't block at all. Added CheckDataAvailable method to the TCPReceive class. Can check or wait for data without blocking.
2021-03-15 15:55:39 +00:00
SpinDizzy
020e2d1b32
DSB2 clock speed from 4MHz to 11MHz.
2021-03-13 08:17:11 +00:00
SpinDizzy
de470aaf52
Fixed cycle counting overflow that was causing DSB2 to halt execution.
2021-03-07 10:12:37 +00:00
Ian Curtis
6cf9974102
missing header
2021-03-03 20:31:57 +00:00
SpinDizzy
46b1de2238
DSB2 IRQ 2 now fires at 1KHz rather than once per frame, improving
...
music timing in Daytona USA 2 and Sega Rally 2. DSB1 CPU timing
increased from 1MHz to 4MHz, improving music fade timing in Scud Race.
Thanks to gm_matthew for these discoveries.
2021-03-03 15:30:19 +00:00
Ian Curtis
e3374256ff
Just a few compile warnings
2021-02-20 22:19:16 +00:00
Ian Curtis
0bfc2aea31
Fix project file
2021-02-19 11:03:48 +00:00
SpinDizzy
e4998f57fd
Skichamp Driveboard error fix.
2021-02-18 10:35:38 +00:00
SpinDizzy
08d4735ee8
Huge refactor of the Driveboard:
...
-Separate each possible boards (wheel, joystick, skipad, billboard).
-Defined a Driveboard type in Games.xml for each games.
-Due to the refactoring, Driveboard Savestates have changed (a common base data + a specific board data are saved).
-Backwards compatibility with previous save states is maintained.
-Driveboard rom section is no longer required anymore. This disables Driveboard emulation in case the rom is not found.
-Added Billboard emulation (vf3, vs2, fvipers2, von2). 7 segments and lamps Outputs are redirected to Supermodel outputs.
-Changes project to C++ 17 standard.
2021-02-18 10:29:15 +00:00
SpinDizzy
ab367774d3
Introduce new config keywords.
...
In xinput mode, lets the choice to have left and right gamepad motors vibrate together.
XInputStereoVibration = 1 (both motors) [default]
XInputStereoVibration = 0 (separate motors)
In sdl input mode, new control option to set minimum strength above which a Model 3 constant force command will be simulated on an sdl gamepad device.
SDLConstForceThreshold = 30 [default]
note : the vibration strength can be mod with SDLConstForceMax = [val]
2021-01-30 09:54:03 +00:00
SpinDizzy
6627b1e95f
The controls of bass/getbass games were no longer good, following recent rom set name changes in Games.xml.
2021-01-05 14:24:57 +00:00
SpinDizzy
6626afc8bb
Added rumble skipad in Ski Champ game.
...
This is only a simulation (cmd are interpreted), not an emulation because we lack informations on the game itself and its driveboard (does it have dedicated cpu/rom ?).
2020-12-30 17:14:14 +00:00
SpinDizzy
34c24c0104
- Suppressed net board console output (using debug logging now)
...
- Added GPL headers to net board source files
2020-12-28 16:22:12 +00:00
SpinDizzy
53185c3eff
Introducing a special release build target with SVN version stamping.
2020-12-24 10:20:26 +00:00
SpinDizzy
1f50519905
Magical Truck Adventure rom patch to unlock region. (enter service menu, then Start P1, Start P1, Service, Start P1, Service, Test)
2020-12-21 15:39:15 +00:00
Ian Curtis
72c0c60c98
-wide-bg option to stretch the background tile layer when wide-screen mode is enabled - Daro Land
2020-12-20 18:17:34 +00:00
SpinDizzy
7d2b21a6dc
Change the duration of constant force effect in SDL2 to correct daytona games
2020-12-01 07:35:52 +00:00
SpinDizzy
5143669cb9
Star Wars Trilogy lever feedback activated
2020-10-24 09:12:54 +00:00
SpinDizzy
402baf87b8
Force Feeback for Linux
2020-10-21 08:19:51 +00:00
Ian Curtis
db013491b4
hopefully fix building on linux
2020-09-19 14:45:51 +00:00
SpinDizzy
981cdc33f5
Added Screenshot feature (ALT+S).
2020-09-19 07:54:26 +00:00
SpinDizzy
ca57659fcb
Remove using namespace from headers.
2020-09-16 07:03:03 +00:00
Ian Curtis
c0729c1048
fix compiling with visual studio
2020-09-15 08:51:23 +00:00
Ian Curtis
75f8ee61a3
fix missing polys with quad renderer
2020-09-14 20:01:52 +00:00
SpinDizzy
309537d64e
Balance initial value set to "0" rather than "false". "False" is interpreted as 0 when decoded as a float, so there will be no effect here, but this expresses the intended logic better.
2020-09-14 07:01:54 +00:00
SpinDizzy
72b2c0eb28
Fixed a longstanding bug that caused stereo channels to be flipped incorrectly.
...
This was due to the initial audio buffer write position being aligned to the middle of a 4 byte (2 byte left, 2 byte right) audio sample.
In multi-threaded mode, some sort of race condition caused this alignment to be fixed until audio playback was temporarily paused (via pausing, loading a state, etc.)
Audio playback should now be fixed and work consistently in all cases.
2020-09-14 06:59:38 +00:00
Ian Curtis
38c3ff61f9
Clip scroll fog to viewport, instead of filling entire screen. Fixes fog bug in Daytona credits.
2020-09-08 09:10:24 +00:00
Ian Curtis
aaa26f678c
Update scroll fog logic. Should fix the credits in virtua fighter and daytona that have fogging applied to the background layer and shouldn't.
2020-09-07 16:25:18 +00:00
SpinDizzy
60c923f45f
- Reworked logging system to support output to multiple outputs: files, stdout, stderr, and syslog (OutputDebugString on Windows, syslog on other systems).
...
- Added ordinal logging level: all, debug, info, error. Compiling with DEBUG defined is no longer necessary for debug logging. Be careful when logging debug level because it produces copious output.
- Fixed -enter-debugger options when compiled with SUPERMODEL_DEBUGGER.
- Command line parse errors no longer ignored; Supermodel will now exit.
2020-08-31 09:28:35 +00:00
SpinDizzy
6491ed46a7
Rename command line SCSP option to -legacy-scsp and -new-scsp
2020-08-26 16:14:54 +00:00
SpinDizzy
d3955062e4
Correct the returned value from previous getbass patch
...
There was a strange side effect on Ocean Hunter game
2020-08-26 16:05:23 +00:00
SpinDizzy
9e8e993026
Getbass related
...
Game now boots in game
Add missing analog input and buttons
2020-08-25 08:48:25 +00:00
SpinDizzy
97d61a970c
Small oversight in the new SCSP code
2020-08-24 10:09:01 +00:00
Ian Curtis
816d541b98
Various SCSP improvements and code cleanup:
...
- Ported MAME's implementation
- Corrected FM sound for songs in VF3 that use it
- Music tempo now closer to real hardware thanks to emulating two SCSP chips.
- Add LegacySoundDSP config option for games with SCSP DSP glitches (ex. engine noises in Sega Rally 2, and loud garbage on Bahn's stage in Fighting Vipers 2)
- Renamed SysFPS to "SoundClock" (since raising this appears to adjust the sound frequency).
(Submitted by Paul Prosser)
2020-08-22 20:41:47 +00:00
SpinDizzy
27cda80abb
Low level z80 core bug
...
Discovered when looking at lemans ffb board (real Model3 rom, not Model2 stcc one)
This could affect other ffb board and/or scud race DSB1 sound board
However I didn't notice any bad things
2020-08-22 09:00:13 +00:00
Ian Curtis
d77433b525
Remove some debug code
2020-08-01 09:02:04 +00:00
Ian Curtis
ba917aca6d
Update glew version
2020-07-31 19:18:51 +00:00
Ian Curtis
5e434e2644
build fixes for mac
2020-07-27 10:28:48 +00:00
SpinDizzy
6af882548f
Linux build compatibility changes
2020-07-03 09:15:08 +00:00
Ian Curtis
f7d75b783d
silence a few casting warnings
2020-07-01 17:51:21 +00:00
SpinDizzy
a73a06d546
Netboard related : Define a new hardware line in games.xml
2020-07-01 15:56:21 +00:00
SpinDizzy
345310fbee
_rotl() replacement
2020-06-17 16:31:22 +00:00
Ian Curtis
9a651bdb61
Only try and make a connection if we have enabled EmulateNet
2020-06-17 15:11:58 +00:00
Ian Curtis
1a3407bec8
Fix corrupted memory in network mode
2020-06-17 11:41:41 +00:00
Ian Curtis
597ea93749
remove old files
2020-06-16 12:01:13 +00:00
Ian Curtis
daef27be37
Replace network code with new tcp implementation
2020-06-16 11:55:38 +00:00
Ian Curtis
8071efbf79
Add SDLnetworking + some basic tcp classes
2020-06-13 19:46:12 +00:00
Ian Curtis
d688fdd3d5
cache variable, without it is unusably slow in debug mode
2020-06-12 17:33:21 +00:00
Ian Curtis
f69d7c7006
fix output values
2020-06-08 10:14:03 +00:00
Ian Curtis
6f6c98c671
The translator map seems to work with paletted colour values too, and the result is not clamped. Colours are passed to the GPU as unsigned bytes to multiplying by 16 will overflow, so we do the logic in the shader. If we passed floats we could skip the shader logic.
2020-05-11 09:05:46 +00:00
Ian Curtis
e2ad593e88
When the translator map is enabled the colour values seem to use 4 bits, 0-16. Why not 0-31 I don't know. Anyway virtua on is overflowing these values for some of the smoke effects. For us the numbers were wrapping around. Clamping is enough to fix this. (Thanks model123)
2020-05-07 19:34:22 +00:00
SpinDizzy
5b406059ce
custom resolution bug fix
2020-04-24 07:04:41 +00:00
SpinDizzy
4f347ff3f1
SDL1 to SDL2 internal changes
2020-04-19 08:34:58 +00:00
Ian Curtis
5ace960f14
tweak value so the map indicator still works at the start of spikeout
2020-01-04 18:15:30 +00:00
Ian Curtis
6b8a29105a
Sutherland-Hodgeman clipping only works for planar primitives. Scud is rendering non planar quads and this breaks our algorithm a little when using the quad renderer. Stretching the near plane a few % is enough to fix it.
2020-01-04 13:48:14 +00:00
Ian Curtis
d711afade1
Only need to clip against 4 planes for poly culling
2020-01-04 13:45:55 +00:00
Ian Curtis
605dad2c02
Fix the sky in harley in first person mode where pixels in the sky are culled when they shouldn't be with the quad renderer. Basically we were running out of precision in a rare corner case. Doing the maths with double precision and casting back to float was enough to fix the issue.
2019-12-27 21:36:46 +00:00
Ian Curtis
a5858e635d
To calculate the mipmap value the opengl needs to calculate the difference in the texture coordinates between adjacent pixels. If there are no adjacent pixels the hw may need to spawn invisible fragments outside of the visible polygon. Our algorithm was culling these out so the mipamp calculation failed for edge pixels. Anyway this fixes quad rendering looking broken with the latest nvidia drivers.
2019-12-10 11:40:39 +00:00
Ian Curtis
06688de5fc
Really should cull against 5 frustum planes.
2019-11-15 20:00:25 +00:00
Ian Curtis
e1827cfd13
Stretch the time the ping_pong bit flips a bit to bump writes into correct frame. Otherwise they end up getting written at like 99.8% of the frame and overlapping with the next.
2019-11-08 20:36:11 +00:00
Ian Curtis
2e6968fe9d
Thanks to our anonymous contributor who managed to patch a model 3 game and run it on real h/w, we were able to obtain some timing values we had been long been missing for correct emulation. The h/w polls something called the ping_pong bit at start-up to sync the GPU with the CPU. Unfortunately we didn't have the correct values and just manually used some per game hacks to get games to run. This mostly worked, but some games were writing more or less frames than they should have been for a given time period. When the ping_pong bit flips at 66% of the frame time, games were writing data for a new frame, which meant writes were often straddling 2 separate frames. We aren't 100% sure if IRQ2 or the ping_pong bit is vblank.
2019-11-07 20:29:17 +00:00
Ian Curtis
06b43c45b3
Ocean hunter in the middle of the game is passing a few matrices with FLT_MAX inside them, which blows apart our near/far calculation. The hardware must have some method to sanitize the near/far for instance if you render something extremely close to the origin you will also blow apart any near/far calc.
2019-11-02 20:11:48 +00:00
Ian Curtis
714f6a123a
skip invalid culling nodes
2019-07-28 12:14:13 +00:00
Ian Curtis
17f4103123
A culling node must follow immediately after a viewport.
2019-07-26 16:39:58 +00:00
Ian Curtis
cc830003f5
Fix possible negative pointer arithmetic which was causing the music to wrap around.
2019-02-22 01:00:41 +00:00
Ian Curtis
8aa476aeeb
Previous mpeg audio code worked for me in debug mode, but the release build had some serious corruption issues when being built in visual studio. Replaced the old spaghetti code with a more modern implementation.
2019-02-21 14:56:25 +00:00
SpinDizzy
c86dab0fe9
- Disabled Alt-O (dump timings) and Alt-U (dump input state) when
...
SUPERMODEL_DEBUGGER not defined
- Option '-print-inputs' works again if no ROM set specified
2019-02-19 09:24:31 +00:00
SpinDizzy
6fe878b1d3
Restore Sega Rally 2 music in some practice stages
2019-02-07 06:32:46 +00:00
SpinDizzy
383e6ac85c
Fixed MPEG music looping glitch.
2019-02-05 10:30:50 +00:00
SpinDizzy
bb89bc8e54
Refactor code from previous svn768 (Note : break old savestate compatibility)
2019-02-05 10:03:50 +00:00
Ian Curtis
90faeafbc4
Fix the audio in sega rally2. The game has packed separate tracks into the left and right audio channels. Selecting the correct track fixes the garbled mess. (Spindizzi)
2019-02-01 21:02:02 +00:00
Ian Curtis
f634d19fdc
Fix shader. Why this worked on my nvidia card .. I'm not sure.
2019-01-24 19:11:26 +00:00
Ian Curtis
8094c2e2b7
Composite the alpha layers at the end of rendering. To do this we need to mask the alpha pixels with the opaque pixels from the next priority layer. Fixes some overlapping shadows in vf3tb that have different priority layers. I assume that was a game bug, but it works on the real h/w.
2019-01-21 14:30:42 +00:00
SpinDizzy
c171356f7d
-Added support for specifying multiple sections simultaneously in INI
...
files, e.g., [ daytona2, dayto2pe ]
-Forgetfulness in 763
2019-01-20 08:02:01 +00:00
Ian Curtis
864bb36b5a
Technically backface culling should cull polys when the dot product = 0, since when it equals 0 the polys is perpendicular to the camera and thus invisible. When you complete sega rally2 (if you can get that far lol) the champagne is invisible. The reason is because all the face normals are 0. So when multiplied by the model matrix they are still 0 and get culled. Tweaking the condition to only cull polys when greater than 0 fixes this, and allows these 'bad' polys to render as they do on the model3.
2019-01-16 01:07:56 +00:00
SpinDizzy
98106df68b
Inputs can now be configured on a per-game basis
2019-01-13 16:20:19 +00:00
SpinDizzy
b0813ef7a0
- PCI bridge can be specified in Games.xml for games that use a different version than expected based on stepping. No more hard-coded exceptions.
...
- Real3D PCI ID can be specified in Games.xml for exceptions that require it.
- Real3D status bit timing specified in Games.xml for exceptions that require it.
2019-01-13 16:00:37 +00:00
Ian Curtis
d8f736e7a8
timing fix for srally2x (Spindizzi)
2019-01-06 23:48:34 +00:00
Ian Curtis
0f49e0b1e9
remove commands that do nothing
2018-12-08 20:01:37 +00:00
Ian Curtis
08eeb20033
clear scissored out areas
2018-12-08 19:55:26 +00:00
Ian Curtis
6075352868
Optimise depth calculation for quad shader.
2018-11-27 20:43:27 +00:00
Ian Curtis
78039e91a8
2018-10-28 18:30:04 +00:00
Ian Curtis
538a714086
Fade out microtextures with higher textures LODs. Fixes incorrectly applied microtextures in LA machineguns.
2018-10-23 00:16:23 +00:00
Ian Curtis
b8da2d6064
debug code should be disabled
2018-10-22 21:59:01 +00:00
Ian Curtis
bf4d725970
Smooth texture repeat makes no sense for alpha/contour textures with pixel dilate. HW seems to treat them as non smooth anyway. Also implement some line of sight stuff, used by Scud. Really need to check the threading/synchronisation of the register reads but it basically works.
2018-10-19 20:59:46 +00:00
Ian Curtis
df02d6a753
return correct PCI ID
2018-10-18 09:42:51 +00:00
Ian Curtis
3dc69f89b8
fix debugging code
2018-10-17 22:36:33 +00:00
Ian Curtis
42eaa7f3d8
fix copy paste error :]
2018-10-14 10:05:24 +00:00
Ian Curtis
3eeec35e7c
Correctly emulate the real3d pro-1000 texture modes in our shader.
2018-10-13 13:29:45 +00:00
Ian Curtis
7bcc70a170
Update makefile
2018-10-01 17:42:45 +00:00
Ian Curtis
3dbfa73734
Both lemans24 and dirt devils are rendering some totally transparent objects as the first model in each viewport. The HW seems to skip these entirely, and including them breaks our near/far plane calculations leading to Z fighting.
2018-09-19 20:43:41 +00:00
Ian Curtis
e3255e45f3
Tweak the ratio for the near plane. Fixes missing text on the map indicator at the start of spikeout. The vertices are 0.003 units apart so a tonne of precision is required at the near plane to not depth test out.
2018-09-18 21:46:38 +00:00
Ian Curtis
c5b156d95d
remove debug code
2018-09-18 21:20:15 +00:00
Ian Curtis
5dab9910e2
avoid double matrix load
2018-09-16 08:43:13 +00:00
Ian Curtis
a7e851d578
updated command line help
2018-09-14 20:31:34 +00:00
Ian Curtis
b5f9ad9651
Quad rendering engine. Set QuadRendering = 1 in the ini file to use, or -quad-rendering at the end of the command line to use.
2018-09-13 12:50:34 +00:00
Ian Curtis
e4f5f0bcaf
Sega bass fishing is starting some off the meshes with a shared vertex. Without having a previous vertex to share with, the values were just uninitialised and junk. The hardware itself seems to hold the value from the previous mesh, and sega bass fishing relies on this undefined behaviour to function correctly. Storing the cached vertices as member variables instead of locally to the function means it holds the values from the last mesh, and uses those values instead of random garbage.
2018-09-02 21:36:24 +00:00
Ian Curtis
c1c2dedcfa
remove dead variable
2018-08-09 21:57:51 +00:00
Ian Curtis
9f5a19a04a
Use correct PCI IDs (Harry Tuttle)
2018-07-09 08:06:06 +00:00
Ian Curtis
80cf1f9b52
add crosshair effect (Harry Tuttle)
2018-07-04 22:15:44 +00:00
Ian Curtis
73ff32a10d
fix cast, and remove extra ; that had snuck into the shaders
2018-06-18 10:24:46 +00:00
Ian Curtis
f9be1259c0
Opaque polys definitely depth test with less than or equal. Virtua striker is drawing co-planar polys for the bar gfx
2018-06-17 11:30:01 +00:00
Ian Curtis
c7ffd0a808
Draw transparent polys to separate layers and composite at the end. This solves a tonne of transparency errors we had been battling with for a long time. The model3 is strange in the fact it only supports a max of two translucent overlapped polys. They are not blended into the frame normally. Doing this means the topmost translucent polys only are visible in the scene, the equivalent of doing a depth pass first, but without the added cost.
2018-06-16 21:31:29 +00:00
Ian Curtis
7497e3f1a6
forgot parentheses
2018-05-29 14:54:23 +00:00
Ian Curtis
f9f43ca66b
2018-05-28 12:55:13 +00:00
Ian Curtis
c1e0e3728b
optimise hash function and parse out transparency layer select bit
2018-05-28 11:59:48 +00:00
Ian Curtis
2af58f4352
select correct bit ..
2018-05-24 20:19:54 +00:00
Ian Curtis
8452d4c0ef
Parse out TranslucencyPatternSelect
2018-05-24 20:13:15 +00:00
Ian Curtis
4d275ba49e
Parse siblings after children. It's the only way to get Daytona water fall to look correct without h/w poly sorting.
2018-05-03 18:37:49 +00:00
Bart Trzynadlowski
3f9b1b76e5
Added a stretch mode (-stretch) and modified new renderer's viewport code (hopefully correctly) to handle aspect ratio correction and widening the way the legacy one does.
2018-05-03 03:46:44 +00:00
Ian Curtis
c6b86c0812
Render the opaque part of texture transparency in the first pass. Fixes numerous transparency related issues in lemans24 and some in ocean hunter. I don't really know if this is the 'correct' way of solving this because the real3d pro-1000 is a complete black box. There is still a lot we don't understand about how it handles transparency.
2018-05-02 20:10:02 +00:00
Ian Curtis
11a3cdbfd1
remove unnecessary copies
2018-04-24 13:51:53 +00:00
Ian Curtis
b39de6e4df
Fix controller inputs (Spindizzi)
2018-03-30 12:04:27 +00:00
Bart Trzynadlowski
934941423a
Inconsequential typo
2018-03-26 23:02:30 +00:00
Bart Trzynadlowski
b5f1b7a2fd
Reverted version to 0.3a-WIP. Release version will be updated to 0.4a.
2018-03-26 23:01:18 +00:00
Bart Trzynadlowski
f0ea6b45a8
Added ability to load save state at startup using -load-state or InitStateFile (in config file)
2018-03-26 22:59:06 +00:00
Ian Curtis
d21e71dced
work around for non working jtag code in star wars
2018-03-21 10:26:05 +00:00
Ian Curtis
b184ca3e1b
Clamping must be applied before the spotlight is applied on step 1.0 h/w.
2018-03-10 09:13:28 +00:00
Ian Curtis
609d1ba19f
Fix step 1.0 games with NET_BOARD defined (Spindizzi)
2018-03-08 14:27:28 +00:00
Ian Curtis
d8572a923a
Update network code (Spindizzi)
2018-02-24 15:53:18 +00:00
Ian Curtis
995cf6adb0
white space
2018-01-29 19:33:29 +00:00
Ian Curtis
10cefb7c61
Support both types of lightgun in lost world. 2nd type fixes some missing fx. Thanks to Any for pointing this out. To use the old type change analog_gun1 to gun1 in the xml file.
2018-01-29 19:31:23 +00:00
Ian Curtis
6bc4224154
fix a few compile warnings
2018-01-25 21:07:22 +00:00
Ian Curtis
820f27cea1
A hack to get spikeout to work (uncomment to enable) (Spindizzi)
2018-01-25 20:40:05 +00:00
Ian Curtis
964f08c894
Disable the netboard if EmulateNet=0 (Spindizzi)
2018-01-25 20:38:31 +00:00
Ian Curtis
85a638bc06
remove extra qualifier
2018-01-22 21:10:20 +00:00
Ian Curtis
04758e38b6
Update make files and fix build for the various options (Harry Tuttle)
2018-01-22 21:01:35 +00:00
Ian Curtis
b5bbda67d0
fix header files
2018-01-22 18:27:51 +00:00
Ian Curtis
571d1060ee
Remove using namespace std from the header files ..
2018-01-21 15:09:11 +00:00
Ian Curtis
8266eecabb
Parse out line of sight position. Only known to be used by scud.
2018-01-15 21:27:21 +00:00
Ian Curtis
99b5b9ba1b
make the logic a bit clearer
2018-01-15 14:40:59 +00:00
Ian Curtis
22a6166b82
fix Ian's bad maths :)
2018-01-15 13:08:39 +00:00
Ian Curtis
a1350d95a2
Update microtexture coordinate logic (Harry Tuttle)
2018-01-14 12:56:24 +00:00
Ian Curtis
863ea95013
simplify maths
2018-01-10 20:37:21 +00:00
Ian Curtis
adb5196625
comment out unneeded code
2018-01-10 16:12:33 +00:00
Ian Curtis
d708ce9ba2
top/bottom were swapped for off axis projection
2018-01-10 16:08:02 +00:00
Ian Curtis
6efa03112e
Rewrite projection maths based upon previously unknown viewport values. The previous values used roughly worked as the normals for frustum planes. Perhaps they were only used for culling and not actually rendering, as sometimes the values don't work correctly.
2018-01-08 18:35:42 +00:00
Ian Curtis
cf7850602b
fix build
2018-01-08 00:13:23 +00:00
Ian Curtis
0b6da91cc0
add the rest of the network board code (Spindizzi)
2018-01-07 14:07:59 +00:00
Ian Curtis
dc3048df24
use the correct c++ deleters
2018-01-06 11:19:04 +00:00
Ian Curtis
19e6aab1fa
use a few macros to make debugging less painful
2018-01-06 01:18:14 +00:00
Ian Curtis
314279ed25
Add network board emulation. Currently not linked with the rest of the project.
2018-01-04 19:14:12 +00:00
Ian Curtis
f7678d918e
remove using namespace from headers ..
2018-01-03 17:51:24 +00:00
Ian Curtis
53c98283aa
rename to avoid clash with a #define
2018-01-03 16:19:10 +00:00
Ian Curtis
3ab93cf6ee
add asynchronous sending functions
2018-01-02 18:54:34 +00:00
Ian Curtis
58dc18cd11
remove dead variable
2017-12-29 11:46:38 +00:00
Ian Curtis
78ae00faf1
Add basic networking files to supermodel. Currently these are win32 specific but can port to SDL or whatever later.
2017-12-29 11:42:03 +00:00
Ian Curtis
080acd08c2
Fix the smallest texture lods (Harry Tuttle)
2017-12-21 11:14:06 +00:00
Ian Curtis
a772dd32fc
fix array out of bounds
2017-12-20 18:47:17 +00:00
Ian Curtis
4702fef33e
remove debug code
2017-12-19 11:43:17 +00:00
Ian Curtis
429d6cbb02
mark as static
2017-12-17 23:02:25 +00:00
Ian Curtis
cc28d5f00e
Implement sub 8x8 tile encoding. Fixes incomplete mipmap chains which previously only went down to 8x8 pixels before. It wasn't known these textures existed before. (Harry Tuttle)
2017-12-17 22:25:50 +00:00
Ian Curtis
cede67468c
Fix some bad/missing textures in fighting vipers. The game is referencing totally illegal texture sizes. The real h/w was just handling it somehow, whilst we were returning null for the textures. This might produce junk textures for the lower mipmaps, but this can be clamped in a later update.
2017-12-13 01:21:25 +00:00
Ian Curtis
62d9584b0d
Shift fog maths to fragment shader to fix bug in virtua on.
2017-11-23 17:51:51 +00:00
Ian Curtis
bddc86aba9
The vertex shader is run before clipping is done. If fogging values are calculated and clamped in the vertex shader it can interpolate bad values, since the range has been truncated. This happens if the polys overlap the near plane. The solution to clamp the values in the fragment shader. This fixes a bunch of fogging errors I long thought were transparency related errors in the ocean hunter.
2017-11-20 22:21:15 +00:00
Ian Curtis
bc7f1e9fac
Fixed shading also works with untextured polys. Fixes some shading issues in La machineguns. (Harry Tuttle)
2017-11-07 00:15:57 +00:00
